Glow Plug replacement - 3.2 Ford Ranger Ford Everest Mazda BT50

Рет қаралды 69,430

Жыл бұрын

Hard starting and poor running when cold are the most common symptoms of bad glow plugs.
This video was done on a 2016 Ford Everest 3.2 with 215,000km. Models may have slight variations but the bulk of what you see here will be the same.

Пікірлер: 32

@anelemafanga2912 Жыл бұрын

Thanks a mill for your wonderfull content. Just finished changing my 2015 xls ranger glow plugs following your videos. Its back on the road. I freaked out a bit when it started the first time then cut off. Tried to restart several times with no luck. Somehow I got the idea that it must be fuel, so I started pumping a bit on the accelerator and it worked. 🇿🇦

@scottynic2894 Жыл бұрын

Hey Killa....I just want to say thank you for all of your uploads. They are really helpful. Much appreciated 🙌🏻👍🏻

@wandi2925 Ай бұрын

Ya know the feeling of driving away from a workshop asking yourself if you paid for a genuine problem or your lack of knowledge.

@jakeshahine1025 Жыл бұрын

Got a set I need to do next week thanks for the video mate 👍

@killawattgarage Жыл бұрын

Have fun

@henrybryce4418 Жыл бұрын

Thank you for sharing your experience on this topic I have followed every step of the way with your process from cleaning and replacing the glow plugs on my Ford Ranger 2015 PX2 🤙🏽👍👍 it’s working perfectly the engine performance is just what I expected God bless you mate keep up the Awesome work 🙌🙌🙏🙏

@killawattgarage Жыл бұрын

Glad it was helpful!

@user-music4u Жыл бұрын

B4 changing glow plugs.. what is the symptoms?

@killawattgarage Жыл бұрын

@@user-music4u had an error code but not a check engine light. I replaced during summer but if it was cold would have hard cold starts and poor running when cold.

@DreAotea Жыл бұрын

Great video brother. Thank you very much

@hamishallan8003 28 күн бұрын

Thanks for the video. How long would the whole procedure take normally if replacing all?

@mrlittlejohnny1 Жыл бұрын

Thanks for the great video, quick question, I’ve been told sometimes the glow plugs will be seized. If I get to taking them out and they feel stuck what do you recommend? A few people say wd40, but in not sure about putting any substance down there. Would you recommend using anti seize on the new glow plugs when installing? Thanks

@user-rb7vh5qr4e 8 ай бұрын

Hey mate according to the Haynes Manual torque setting for the glow plugs is 12nm.

@sheldonmcclaflin8904 Жыл бұрын

Is there a millage recommendation for changing the glow plugs? Thank you very much.

@Mosesk1988 6 ай бұрын

Have you installed any other brands of glow plugs? I replaced mine with ngks and it seemed to of not used all of the thread compared to the geniune ford ones. Px2 ranger. Its all running sweet but..

@rlgstudios3263 Жыл бұрын

Thank you so much for the great video!! Quick question what is the best real world fuel consumption you can get out of a 3.2, driving at low rpm?

@turbostyler Жыл бұрын

Low rpm doesn't really save you fuel, it's about load. But I have a 2014 3.2l bt50 and I normally get about 9-10L/100 that's mostly driving in the suburbs and also towing between 1-2 tonne. On the highway you can get easy low 8s without towing anything.

@killawattgarage Жыл бұрын

I don't generally drive for economy but those numbers above are accurate

@gabrielterre9047 Жыл бұрын

A 100 kmh - 13,7 km x litros de combustible!! Saludos desde Argentina!

@Robdutton91 6 ай бұрын

Standard wheels and tyres I used to get 29-30mpg mixed driving if I was light on the accelerator from my 2012 manual. My friend has an auto and struggles to get above 25-26mpg

@sagevalaau5627 9 ай бұрын

Hey mate do you know if cylinder 2 glo plug can cause the car to go into limp mode if faulty? Cheers

@Robdutton91 6 ай бұрын

Unlikely

@turbostyler Жыл бұрын

Hey mate, do you have your own workshop? Just wondering if my glow plugs go bad id rather go to you than have the displeasure of taking that POS inlet manifold off again!

@killawattgarage Жыл бұрын

I have a private garage that operates part time. Not taking outside work

@andrewmitchell6332 Жыл бұрын

Can carbon build up cause stalling?

@killawattgarage Жыл бұрын

Yes but it’s unlikely. You may have another issue going on

@Josh-oc3lf Жыл бұрын

I’m experiencing low power at low rpms for my 3.2 ranger, this is after my intake manifold and Egr was cleaned. It was fine for a month or so. Now it’s really low power. Could it be the glowplugs? No check engine light on as well though

@jhunfilhonor3583 Жыл бұрын

I'm experiencing the same problem right now sir can you share to me how did you fix it?