No video
🔫 Glueing T-Piece to Barrel Gel Blaster 🔫
Рет қаралды 5,394
4 жыл бұрынTTB Gel Blasters Pimpama
Help support the channel and buy me an Tom a coffee gives me the energy to build more Gel Blasters 😁👍👍
www.buymeacoffee.com/Phts6KWkH
The toy guns which were using are Gel Blasters PPE gear must be worn at all times while using these toys. Never point a gel blaster directly at a person who is not giving you permission. Making sure that you’re always wearing I protection. Do not point toy gun towards any people who were not wearing PPE protection. Not to be used in public places please check your local rules and regulations for your locations and state. For more information don’t hesitate to contact me or join the club. 😁🔫🔫
@lukemclean8271 4 жыл бұрын
I glue them the other way. I use the grooves with O rings in them as a barrel stabilizer
@itsskyzee4537 3 жыл бұрын
thank you TTB for that helpful video :)
@bonkCsM 4 жыл бұрын
I've bought an upgrade pack for my gen8 today, waiting for it to arrive. When you spin the end of the barrel in the glue do you have to wipe any off of the inside so that it doesn't decrease the ID of the barrel or is that not really an issue? Thanks for the good videos mate.
@TTBSCOOBY 4 жыл бұрын
Thanks for the question. We Didn’t get any glue on the inside of the barrel. Just be careful when applying and you can look through the other side to make sure that it’s all clear. 🤩🤩👍🏽
@bernzie001 4 жыл бұрын
Random question, does a longer barrel improve accuracy at all, is is it just for fps?
@TTBSCOOBY 4 жыл бұрын
The length of the barrel must match your cylinder. Depending on the percentage of a cylinder depends upon the length of your barrel. The lower percentage of the cylinder the short of the barrel. The higher the percentage of the cylinder the longer the barrel And that’s before you need to take into consideration your gears motor and everything else
@benjaminlim328 4 жыл бұрын
how do you remove the stock barrel of the Kriss vector v2 from the T piece? mine seems to be really stuck tight
@TTBSCOOBY 4 жыл бұрын
Benjamin Lim Good question. you can either drill out the barrel or buy a new T piece. I would just buy a new one. 😁👍👍
@LONGCAUSE 3 жыл бұрын
Can I use a hot glue gun and get away with that?
@eliezergunawan 4 жыл бұрын
How do i remove the t piece from the old plastic inner barrel? Pls reply
@TTBSCOOBY 4 жыл бұрын
FrostyMcFlurry YT Best to just go and buy a new one
@eliezergunawan 4 жыл бұрын
@@TTBSCOOBY thanks
@eliezergunawan 4 жыл бұрын
@@TTBSCOOBY what's the pros and cons with using an aluminium barrel?
@daniel_lobster 3 жыл бұрын
FrostyMcFlurry YT all pros no cons
@bigboys108 4 жыл бұрын
How is the AWM
@TTBSCOOBY 4 жыл бұрын
KTM lover Waiting on parts coming from China probably gonna be awhile 😔
@bigboys108 4 жыл бұрын
Is it because of the virus because of Factory Wait
Kentucky Ballistics
Рет қаралды 2,1 МЛН