Glycol Dehydration Systems Intro and Overview [Oil & Gas Training Basics]

No video

Glycol Dehydration Systems Intro and Overview [Oil & Gas Training Basics]

Рет қаралды 60,120

Күн бұрын

In natural gas dehydration, producers dehydrate gas by removing the water from it. In this chapter of Kimray's Product and Application Training, you will learn:
- The uses of natural gas
- Why gas is dehydrated
- Where dehydration occurs
- What triethylene glycol (TEG) is
- The dehydration process
- The flow of fluids through a dehydration system
=============================
▶ SUBSCRIBE to the CHRONICLE: kimray.com/Subscribe
=============================
PODCAST (APPLE): apple.co/3c82VQd
PODCAST (SPOTIFY): spoti.fi/2ZMCm0j
FACEBOOK: / kimrayinc
LINKEDIN: / kimray-inc
PRODUCT & TECHNICAL SUPPORT: prodtechsupport@kimray.com or 405-525-4264
WORK @ KIMRAY: kimray.com/Careers
0:00 Intro
0:30 What is Dehydration?
1:04 Why Use Dehydration?
1:18 Where Dehydration Occurs
1:42 What is Triethylene Glycol (TEG)?
2:08 The Dehydration Process
4:11 Dehydration Unit Sizes
4:30 Conclusion
=============================
TRAINING SERIES Level 1:
▶ Intro to Oil & Gas: • Oil and Gas Industry O...
▶ Tank Batteries: • Tank Battery Intro Ove...
▶ Separators: • Intro to 2-Phase & 3-P...
▶ Heater Treater: • Heater Treater Intro a...
▶ Compressors: • Natural Gas Compressor...
▶ Free Water Knockout: • Free Water Knockout In...
▶ Gas Production Units: • Gas Production Unit (G...
▶ Dehydration Systems: • Glycol Dehydration Sys...
▶ Filter Separators: • Filter Separator with ...
▶ Wellsite Safety: • Oil and Gas Safety 101...
▶ Burner Management Systems: • Components and Operati...
=============================
Music by hooksounds.com

Пікірлер: 21

@TravisScott-dr8ig 25 күн бұрын

Great video

@MrEduardo3650 2 жыл бұрын

Esse canal é maravilhoso!

@tylershimek6167 2 жыл бұрын

I can’t believe there’s a video on this! It’s helped me tremendously

@KimrayInc 2 жыл бұрын

That's awesome to know it was helpful! Please let us know if there are ever any other topics you'd like us to cover! Thanks for the comment

@rayhanebenafia8766 Жыл бұрын

EXTREMELY HELPFUL !!! Thank you so much ! Excellent Presentation btw !

@gokulkrishnan599 4 ай бұрын

Wonderfull explanation. Thank you so much

@abdalladraz6740 2 жыл бұрын

Thanks of this content it's useful at all

@alqassem-a Жыл бұрын

The best explanation 👌

@AliAli-eu6oy 2 жыл бұрын

nice

@israaali3128 3 жыл бұрын

very sufficient

@shunmugaganesh8697 2 жыл бұрын

Very nice explanation. Thank you❤. What is the need of inlet scrubber before gas entering into the contactor as already incoming compressed gas crosses the KOD of feed booster. compressor.

@KimrayInc 2 жыл бұрын

The inlet scrubber give the saturated gas one last opportunity to give up any water. Filter separators can also be used just upstream of the contactor to condense liquids and filter out any compressor lube oils, scale and other debris that might be in the flow stream.

@janinemendoza9439 2 жыл бұрын

Hi! Just wanna ask is it okay if we don't put a BTEX condenser in a glycol dehydration plant? What are the pros and cons of these?

@KimrayInc 2 жыл бұрын

I'll try to answer your question without giving direct "advice" on what you want to put in your plant. There are two options to deal with the BTEX and VOC (volatile organic compounds) that result from the gas dehydration process, you can condense or destroy them. A BTEX unit will condense the vapors into liquids and allow them to be sold. If a BTEX unit is not in place, all of the vapor must be destroyed by flare or combustor.

@janicesmyth2183 Жыл бұрын

Hi there. Thank you for the video. After the reboiler, what temp does the TEG need to cool down to before it's reused in the contact tower?

@KimrayInc Жыл бұрын

After leaving the reboiler, the glycol needs to be cooled to below 200 degrees F (150 degrees F ideally) before it enters the glycol pump. After the glycol exits the pump, and before it enters the contact tower, it will need to be cooled to no more than 20 degrees F above the gas temperature.

@janicesmyth2183 Жыл бұрын

@@KimrayInc Thanks so much! YOu've made my day!

@oumski6893 Жыл бұрын

❤😊

@norbertomoraes2538 2 жыл бұрын

Why does the TEG need to be changed around 18 to 24 months?

@KimrayInc 2 жыл бұрын

After 18-24 months of operation, it will most likely need to be changed because of the contaminants and degradation of the glycol as it’s circulated through the system. The level contaminates, filtration and how the equipment is operated will help determine when TEG will need to be changed.