Because of you and P Gamboa, I officially have a heated steering wheel! Thanks for the clear and informative video!

EXCELLENT!!! Top notch instructional video :) Very articulate and down-to-earth so anyone can follow :) I only wish ALL DIY videos were like yours.

Awesome video! Thanks so much for sharing. I wouldn't have attempted this upgrade without your help. I just finished the install and my hands will be thanking you all winter! Thanks again!

VERY well done! Wish i had snap ring pliers! LOL. I found removing that to be the hardest part. It fought me for 20 minutes! The 2nd hardest part was removing the bottom shroud cover. Didn't realize the tile lever handle came off like that! Nicely done! I think this video will really help those on the GM-Trucks forum be more comfortable with this upgrade. Just a side note: There are some trucks out there with the 2-pin mate connector down below to plug into, but GM didn't continue that run into the fuse panel. So while present in some, it may not be hot. Great details on this!

I am going to buy a new truck and love the heated wheel on the 2020 loaner I have ans thought to myself, " I should contact Phil Gamboa." Quick search and found this video and you already contacted him! He is an amazing asset to the GM forums and sites. Great video! Appreciate you making this for all of us. Cheers.

Thank you for posting...This video helped me replace 2015 GMC Sierra steering wheel. Mine wasn't to upgrade the wheel only to replace it. Over the years it had gotten pitted and nasty. Thanks again!

Thanks for the video it was very helpful. I just finished the install. It was a little more difficult than I thought, I had a very hard time with replacing the plastic shroud and disconnecting some of the wiring. But thanks again very helpful. I’m digging the heated wheel 👍🏻

Nice job 👍 and thanks for giving Phil a shout out. I watched his mirror upgrade video along time ago and couldn't find my way back to it until you said who it was you contacted. Again thanks for the video. Nicely done ✔

Finally got around to doing this in my 15 HD LT today. This video was excellent and I really appreciate having had it to work from. Thank you!

Subbed because that was a kick ass how to video right there. Good job!!!

Thanks, I already purchased the harness from Phil and have it installed waiting for the clock spring. Great video, thanks again

This is just what I needed to figure out how to get the airbag out of my steering wheel. Thank you!

You Just Saved me from trading in my Colorado for the couple upgrades I didn't have. Arthritis is getting bad. Didn't know this was possible.

Thanks to your video I now have heated steering wheel in my truck, thank you sir 👌

Awesome video man, Very detailed, Thanks for making the video, I plan on doing this upgrade to my 2017 Silverado 2500 HD, I messaged P Gamboa about this, as i had some questions, Gamboa's video on his center console install helped me tremendously when i went to install a center console into my truck, i was in constant contact with him during install, very lengthy install, but worth it.

Excellent video! Thank you so much for posting it. The installation in my 2017 1500 worked very well.

Great video man! Looking forward to switching my steering wheel out on my 18 silverado! Subbed to you for great instructions on how to remove and install everything!

This is going to save me thousands.. i thought i was going to have to get an LTZ just so i could get a heated steering wheel. Great video

I think I'm going to order the heated steering wheel for my 2019 Tahoe and try this install after watching your detailed video. Thank you. I'm assuming it should be virtually identical to do. EDIT: Just finished this conversion and it works flawlessly!

Excellent work! Did my 18 burb. A little different, but this was very good...

Man, I wish I'd seen your airbag trick...did my swap about two years ago, and had no real issues but that airbag was a *bear* to get off. Working blind, etc. The cell phone...gah. Coulda, shoulda, woulda...

Great video. Thanks for posting. I’ll actually be attempting a 2022 Sierra steering wheel (uses the Torx bolt, not a nut.) I may have to swap the steering column. Oh and did I mention it’ll be going into a 2007.5 NBS Silverado? Haha.

i just bought a 2014 and this is a great video!

Very nice video, well done. Quite refreshing compared to most YTubers

Amazing work! First video I’ve seen and im subscribing!

Great vid. This is definitely my next mod. Pgamboa is the man. He’s helped me on a few things. Subscribed, and ty for the vid.

Great video. I have a 2015 Sierra SLE, where did you order the steering wheel? I want to do this, I actually called a GMC dealer yesterday and they said they wont even touch this project. Also, did the new wiring come with the steering wheel?

I forgot to ask you about lights and the BCM. Is anyway to know if the BCM has the right programming to do that led light switch install. Id just hate to spend the money and find out BCM doesn't support it. Thank you sir.

If I’m replacing a work truck steering wheel with a basic leather wrapped wheel, do I need to replace the clutch spring ?

How come some guys didn't get power to the heated wheel and they had to run a hotwire from the fuse box on the driver side?

So you didn't have to run a separate power line to the heated wheel? Some videos show no power to the heat even with the clock spring upgraded

Will this newer style steering wheel from 2014 on up, work on a 2012 Silverado with the previous style wheel? I would love to change mine to this style steering wheel.

Why replacing the airbag wire? Great video.

do you have a video to explain how to add audio control to new steering wheel?

Great walkthrough, thank you, went easy.

I appreciate you and making this video.

Unfortunately the 2014 yukon steering wheel is totally different from the one in your video. Can this be done in the 2007-2014 Yukons.

Just beautiful. KZfaq for the win again

The clock spring must be replaced for the upgrade?

Your truck is a 2500, will these parts work on a 1500? I have a 2016 GMC sierra 1500 and want to do this conversion.

I have 2016 tahoe and there is no removing trim around the key that does not exist on my Tahoe.

Just completed this yesterday. Excellent detailed instructions! I’m not getting any power to the steering wheel controls or horn. All the connections are tight and the heated wheel fuse is good. Would you suspect a faulty clock spring?

Awesome video, I'll definitely be using it in the near future. Just have a question. My truck is already equipped with a heated steering wheel but the element has burnt out in it. Do I need to replace the clock spring or can I just get a new steering wheel and swap it out?

Subscribed! Phil is the absolute man and has helped me a lot along the way with my truck. I'm hoping you can help me out. I am looking to do this upgrade as well, but I am also hoping to upgrade my cluster in the process. I have a 2017 WT that has been completely overhauled inside and out except for the cluster, which I can't get any solid direction on. The truck was an IO3 and is now an IO5, so I have the HMI module in now. Any idea what I would have to do to get a new upgraded cluster working? Would it be the same clock spring you added, a new steering wheel (with right hand controls) and a programmed cluster? Any help is appreciated. Thank you for this video! I

Clear and to the point, thanks! I've found that the steering wheel w/ the crash alert button is cheaper for some reason so that's what I purchased. Does that mean the clock spring part number will change or can I use the clock spring w/ just the heated wheel feature? Basically I'm wondering if the connector on the wheel will be different since I purchased the wheel w/ heat and crash alert.

great video, could you tell me if the part # you have for the heated steering wheel has controls on the back side of the wheel ? I just want to make sure I order the correct one

AWESOME video!! I have been looking for this! I also have a 2015 Sierra HD. It is an SLT but did not come with the heated wheel. That being said, I could like follow your video to the T and have the same result, correct? Thanks again!

Great job very nice video!

Nice video. Thanks!

Hello great video just wondering if this would also work for my 2015 Silverado LT and where do I get the new steering wheel

Question... will a steering wheel work with the volume control and heated function work with any versions of gmc intellilink? I have a 2018 gmc elevation NON sle model so doesn't come with the newest intellilink but still the 7" screen? Hope that makes sense.. nice video

Thanks for the video. Did the upgrade on my 2018 Silverado doesn’t work. Dash has CAL displayed. Any suggestions.

Great video bud just curious what’s an upgrade like this run¿

Hi, great video. I am in the middle of installation and I found one plug where you show the heated steering wheel on the harness But it’s different than the plug from the wheel? I assume it’s the heated steering wheel plug as I checked the fuse box and there’s purple wire in the correct spot and 7.5 fuse in for it.

Great Video! I am planning on attempting this on my 2019 Silverado 2500HD very soon. I read through the comments, and Iam hoping you can let me know the part numbers for the steering wheel and the Clock spring. I do not currently have a collision alert indicator on my steering wheel, if that helps! Also, the steering wheel I currently have is black. Thanks in advance for the help!

Good Video I hate those Air Bag CLIPS !!! How much was the Wheel ? is there a Module to tell when to Power Off wheel ?

so if the truck doesn't have the heated wheel "option" say like a 2010 tahoe, can that plug just get connected to 12v and ground? are there other wires in that heated steering wheel cable such as a trigger to turn it on (when the car starts)?

this was an amazing video tutorial man! I just want to verify, it should all be plug and play on 2014+ models correct? I thought on some forums I saw that the PCM needs to be programmed or something, but that doesnt make sense to me. Also, why is a new clock spring needed? GMpartsnow only has 1 clockspring for my 2014, curious why I have to replace.....or do I have to buy a different year clock spring? Thank you for your insight!

Great video!

great video!

Great video! I have a 2018 Silverado 1500 single cab work truck model that I'm upgrading to a heated steering wheel and telescoping steering wheel but for the life of me I don't know which clock spring to buy , any suggestions?

What was the total cost for this upgrade?

A couple of questions.... Why didn't you disconnect the positive battery terminal?? Where is the best deal on the parts needed?

If I have this steering wheel already (heated, music controls, etc) will I need to replace the clock spring and airbag cable? Or will I just need to swap the worn down steering wheel with the new one? Thanks!

GREAT VIDEO...GOOD MAN!!!!

What is the model steering wheel that you have in the video? I want one with heated wheel, no crash button, and black leather with silver accents on it. Looks like the same one you have in video.

I found a wheel at a good price, but it has another button (Collision Alert?} above the heated steering wheel button. Does it matter? Thanks!

Can you upgrade the radio/dash cluster controls if you’re wanting to do a Denali upgraded cluster on a 2500HD?

I added the clock spring, and steering wheel, heated wheel doesn’t work, the fuse has power, the violet/white and black under the dash both show ground. What is missing?

Anyone have a link to where i can buy everything shown in the video? Thanks for the awesome video. Just hoping i can get the parts in!

Here is a question, is this possible with the 07-13 models? I want to upgrade to a newer wheel(14-18) and this would be ideal. I've watched both videos and seem possible with some slight wire changes on connection harnesses. Please, make that video :)

What makes sure your steering wheel is clocked correctly on reinstall ? Thanks

Do you know what is needed to swap the steering wheel of one from work truck to one with controls

Why do you have to replace the clock spring? Is it different than the one from the non heated steering wheel?

I would like to do this on my 2018 gmc Sierra 1500. Would you happen to know the part number for the clock spring? The one you show the part number for tells me it won't work.

Any chance one of you guys have a parts list for this upgrade?

Maybe I’m ignorant, but why do you have to change the clock spring?

Could I buy a leather steering wheel and replace just the leather part on my vinyl WT? That way I don’t have a useless radio control button.

I’m seeing some heated steering wheels but none come with the clock wheel harness. Where do I get it ?

Can us just buy the wiring harness and module for the heated steering wheel/cruise control?

You sell harness so the steering wheel controls can work in a work truck model 2014 gmc sierra ?

What can I do if I dont have the extra heated steering wheel harness, and links?

I just bought a new 2019 GMC 1500 and was wondering if I could install this or would this void my warranty? Or would it be better if I had the GMC service department install it for me and keep my warranty? Any suggestions?

Did you have to Align steering wheel after install? Or does the wheel only go on one way?

Have you heard of anyone using the clock spring you have previously linked in other comments on a 2017 2500? I have bought the steering wheel already, so the clock spring is all I have left to order.

I'm wondering if the clockspring part number listed in the video supports collision alert? I need the clockspring to support heated steering wheel and collision alert (as well as the other controls that are normally present)

Did the swap and the horn doesnt work now. Any clue what may have happened?

Do I disconnect both batteries on a Duramax?

Nice video... do you know the part number in your old steering wheel I got a 2014 GMC Sierra sle and I want to replace for the same steering wheel ?

When you remote start your truck does the heat come on the steering wheel on it's own? Or do you have to turn on after you get in the truck?

Question I plan on getting the 2015 GMC Sierra HD All Terrain, used, tomorrow. One thing I love on cars in the winter is heated wheels. So I plan to use this video to help me along the way. Now I need to order the parts. Could you just post the links in the comments for each piece and all of us will be able to access it quicker? Thanks!

Not going to go through all the comments so I’ll just ask. Will the heated wheel come on automatically if you have remote start? Thanks if you answer.

Why do you need to change the clock spring?

Very cool now I want to do that lol

What’s the part numbers for steering wheel and all. Thanks!

have a 2015 Yukon XL SLE - what all would I need? Dealerships say this cannot be done.

Just did this on my 2018 silverado. Was plug and play. Thank you!!. Just one question. The new heated wheel seems a hair smaller in diameter, across and grip wise... Anyone else?

Hey TF. Any chance you could help me find the correct part numbers for my 2015 Chevy Silverado 1500 LTZ (black)? I've looked at a couple of websites any they have several heated wheels and their descriptions are somewhat confusing. Between that and at least two dealerships telling me this upgrade is not possible, I'm a little frustrated. Thank in advance.

What's the P/N for the clock spring? I have a salvage wheel, with heating the heating element. Is there anything else that I need? Why do you have to change the wire from the airbag module? Or does that just come with the new clock spring?

Will a salavge wheel and clock spring from the junk yard work?