Great job!! I been installing for 18 years now. Enjoy watching videos. Always like to see other people’s methods. One trick I do on the side mouldings is leave the bottom screw in and swing moulding down. That screw is a pain. Keep up the good videos.

Awesome work!!! always very professional, thank you for taking the time to record videos. They help me a ton I’m sure I’m not the only tech that have benefited from you videos . Keep up the good work. 👍

Alfredo really looked out for me on this one. Thank you for the step by step support setting up my Milwaukee multi tool. Incredible tool and incredible person. Thank you from my family to yours

Your videos get better every time. Thank you alfredo.

Takes pride in his work. Good job on the install.

Beautiful scenery in the back ground! I miss being there

man i could have used that setting tool SO many times.. very nice.. again ,,great job

You are so smart always have the right tool for the technique

Fantastic Job. As always. It is a lot colder up here though. DW 1341 becomes extremely hard.

I like that rolladeck, very cool!

Alfredo does nice work, good job

Excelente!!! muy buenos tus videos.

You did a great job. I would love to see you use a real cold knife. I have done Windshields for ten years the only power tool we use is a ambush. Have never used any type of wire or cord system. I would love to learn but there are very expensive. Me and my boss did a 1549 in 15 mins one day. That was pulling the truck in, completely remove the wiper and cowling. Take out the windshield rest and reinstall the wipers , cowling and vacuum the floors and seats and wipe down the car. And pulled my out of the shop. Great videos

Great job . Thanks

hermano eres el mejor he aprendido mucho de ti

I watched couple of you videos and the tools you're using need a part number in the description section. Thank you.

Great video Alfredo, what kind of blades do you use for the Milwaukee cut out tool . Thanks

I think the rolladeck is easier than the side kick. Both me and my tech are small guys so looking at what aid we should possibly use for setting the glass

Wow a job done in 30 min quick money and easy to install once the skills are mastered simple 🤑

What is the name of the red wireless tool you used to cut the window out?

Que tal amigo muy buenos videos .. una pregunta que liquido usas para limpiar o descontaminar el parabrisas le agradecería si me responde

So when you have to go down to bare metal does that make the window sit any lower? and by the way nice job.

Wheredo you get the blades to fit the Milwaukee?

Great job , could you share the link of the chargeable knife machine the red one you used or what the name of it ? I am tired of using the cold equalizer knife, thank you

Yeah First class work all the way.

Where did you buy the cold knife machine at?

I've done close to a 1000 DW1549GBY I'm done with it in about half hour. The power tool that's used on the top, I've never used. Next time I do one I'll post the video. No scratches and no issues, no vacuum either

Great job very professional. Very clean and neat, Thank you for this video was a big help!!

What do you use for the lubrication?

Nice professional work were can I get that blade

How is this blade for the Multitool called?

Great Job Alfredo as always ! the rollerdeck is a good tool but i went ahead and got a quickset and let me tell you Papa that it is wayy easier to use and set up than the rollerdeck , have you gotten to use one yet?? keep up the great work Bro!

will this method work on a 1970 nova?

What blade you use in the oscillation tool?

Esa que usas es multitud o que es la roja

Alfredo, Where did you get the dash protector? It looks bigger than the equalizer one

Great video champ 👌👌

What’s that Milwaukee tool called it’s better than a cold knife

Hey I'm in Phoenix Arizona where do I find a guy like you here in Arizona or will you come here to do my repair?

good show! I don't like the power tools no more, 26 year has hurt my arms , hands , and elbows, I love working with the spider tool.

Where can I buy that fender cover that you use? thanks

Where can I get one of them cold knife power tool

Where do you get that tool that you hooked to the wiper to help you set the windshield?

One more question, on certain moldings do they always come out perfect? like underside and if they don't what do you do?

So what makes you determine whether to use an oscillating tool with cold knife or using the spyder?

Can you use any bigger of a blade on your ambush?

Excelente trabajo yo soy de riverside cuanto me sale para una 2002 chevrolet tahoe primo

What blades do you use for the Milwaukee tool. I bought that tool but the blades wont fit.

Hi Alfredo, can you support me by telling me which tool is the one you use at the top of the windshield, to remove it, since I am from Mexico and here, they do not sell that type of tool, I have only been able to get an equalizer, I would appreciate it

Alfredo can you do 1217s or vehicles like this that are in some cases hard cutouts.

what tool and blade is that

Where did you get that blade let me know please

Any safelite techs watching lol

Cold knife top and sides, Ambush on the bottom

I have a question is that just water your using to lubricate for extractor or mix in with soap

HOLA ALFREDO.. COMO SE LLAMA ESA HERRAMIENTA QUE PONES ABAJO PARA SOSTENER EL VIDRIO .

Alfredo I do my 1341s the same way. But I don’t have those fancy electric knives. I have to muscle up on the top 💪🏻💪🏻

What product name glue is the best brand?

I have an 86 4runner it seem like the urethane isn't adhered to the glass on the pillar side as I can physically move the windshield up a bit What would be the best thing to do?

If you don't have a wire, you will probably have a sawsall and a homemade spatula attachment, plus a battery multitool. Lol

When can I get that tool

Just curious has anyone else on here had any trouble with their cordless ambush extractor battery not making good contact after the strap breaks? Mine has completely took a shit on me got the new cordless Blackhawk it’s a little smaller and powerful love it so far. My ambush only lasted 2 1/2 years before it crapped out, have replaced batteries and tried numerous other batteries even with a full charge with a new battery it runs like it’s half powered

Hey Alfredo, what oscillating cut out tool are you using? The only ones I can find through windshield companies are almost $1,000. Don't really feal like paying that much for a tool. But if I have to I will. Love how easy that tool makes cutting the urathane.

First part ,nice como extractor.. but your using the wrong blade, always use short blades at all times, long blades only for deep cut for them explorer WS, no need to remove the universal molding, jus flip the extractor blade

What was the name of the tool you used for the top part of the window and where do I get the blades

Really cool tools that you're using but I can already tell that this would take too long to be worth buying that tool. The simple design of this windshield should not require this much effort, just "eye" the top corners to align with the rain guards and make sure the U-Lip molding is flush to the top portion of the pinchweld. But we all have our own ways of doing things.

Tool and blade part numbers please ?

Por favor nombre de las herramientas bro?🙏

What I've learned with this job is the more you rush, the more tools you drop. Lol..

Pinche máquina guanga

Motored pulling knife?😮

All that power. Why not just use cold knife? Have done so many of those windshields. Are they harder to cut out? Yes, but not so bad. My batteries went bad on account of not using the tool enough. It definitely has its place. Either way your a very conscientious installer.

My boss makes us use the stupid handheld cutter blades I wish he would let us use power tools to make it easier I hate those push-pull blades

"Back in the days?"

Everything I wanted to learn you skipped over

I respect your work a lot but the rolladeck is not the best setting tool for this particular truck I rather do a dry set and set it on the glass stops

Coldknife is faster yo

That green thing says high voltage

0:23 hello

DW 1341 before that was DW 1217 before that was DW 848

This job is getting to time consuming, i do 7 to 8 job a day and a use the car stops to set the glass

Look like ubwill have alot of scratches all over your dash and hood paint hell naw mane

Working on the street is a bad idea. Installers have been injured from cars passing by. Plus the fact that you are stepping up and down on the curb. I call ahead and get customers to get cars backed in driveways and centered. I get some pushback, but it makes my job more efficient and safer. I see installers working on vehicles driven into spots and walking around it to work on it. Come on guys have some Self respect and make your jobsite safe and efficient . Stacy

What? Speak up son.

I see you're in Corona.. I got a 1997 suburban needs a windshield and 99 ml430 needs windshield. I'm in Moreno Valley do you do mobile it looks you do here by the video. I'll call tomorrow.

Looks like San Jacinto CA to me kinda..