GMT800 Denali Center Console & DIC Upgrade

Рет қаралды 16,863

Жыл бұрын

Installed and wired in a Denali center console with a Driver Info Center.
Thanks for checking out my content here on KZfaq. Make sure to like and comment if possible to show KZfaq creators you are enjoying there content as its quite time consuming. Thanks!
Follow me on Instagram - / postalredneck
Cameras Used In Production
Go Pro Hero 3 - (Brothers) $40 Used Thanks Bro!
Go Pro Hero 4 - (Tylers) $Free to use
Canon VIXIA HFR800 - 7/8/19 to Present (Main Camera) $293.18
Activeon CX - 11/23/17 to Present (Cheap Action Camera) $30.74
Canon Powershot SX620 HS - 6/4/18 to 7/8/19 (RIP) $264.99
Canon Powershot SX610 HS - 1/10/16 to 6/4/18 (RIP) $227.88
Nikon Coolpix S6200 - The OG camera of this channel
Used Camera Stands - $40
DJI OSMO - $200 - amzn.to/2KpITZV
Total $1096.79
Tools Used In Production
Shot Cut - Video Editing Software $Free
Paint - Picture Editing Software $ Free
Total $0
Music Used In Production
NoCopyrightSounds - / nocopyrightsounds . $Free Thanks NoCopyrightSounds!
KZfaq Audio Library - $Free
Total $0
Advertisements/Promote Channel
Vinyl Logo's PostalRedneck - $50 - Very little help with getting subscribers but still wanted
Silver Lake Flag with PostalRedneck & Skull - $35 - Useless with getting subscribers but cool haha
Remote Kill Switch for MarkFreeman408 - $250 - Did very little for the channel unfortunately
Total $335
Overall Total Into Channel $1,431.79

Пікірлер: 63

@rockymtnredneck4888 Жыл бұрын

I thought I was doing good adapting a GMT800 console set to my GMT400! You went to town on yours! All the bells and whistles!

@PostalRedneck Жыл бұрын

Problem is now I know my truck only gets 12mpg haha. It is a nice console. The light up cup holders and light in the console when you open it are my favorite things about it.

@rockymtnredneck4888 Жыл бұрын

@@PostalRedneck yeah, I’m kinda jealous of the courtesy lights. Nice touch. You gonna look for some LED bulbs for them?

@PostalRedneck Жыл бұрын

Already installed led lights in the console and the back feet light area. They were just 194's. I also replaced the button bulbs in the DIC with led's. I need to tinker around with putting in LED's in the cup holders. It will get done just not sure when.

@umpty Жыл бұрын

I watched your video on 1.5x speed, now I have tons of time for other things. I think you should use the speakers in the console for your C.B. speakers

@PostalRedneck Жыл бұрын

You are still in training. You will soon be watching videos in 2.5x speed and living the good life. Automotive speakers are 4ohm and CB's require 8ohm so I would have to use a small amp to make it work.

@ambedextrus4794 11 ай бұрын

really helpfull video. I love how you actually went out and figured out how to do the wiring nice and neet

@PostalRedneck 11 ай бұрын

Glad it was helpful! Took a bit to find the wiring diagram so I could wire it and figured I should make sure to share that info so others can do it as well.

@bigmizzymike 8 ай бұрын

Great job. I just want the better armrest. Looks much more comfortable. Bummed i gotta change all that but im game. Lol

@PostalRedneck 8 ай бұрын

Its not only a more comfortable arm rest but the console its self is so much nicer and set up way better. I have done this upgrade to both my Yukon and Tahoe now.

@joelane5698 Жыл бұрын

Nice video can't wait to see you change the seats and the next video 😁

@PostalRedneck Жыл бұрын

LOL yeah them seats are rough. I only have $209 into that truck. Its my winter beater so I just deal with them.

@MowersGoneWILD Жыл бұрын

Wow that is a lot of work to switch over, but lots of cool gains in the switch! Great overview of the process.

@PostalRedneck Жыл бұрын

For sure. I didnt think it was going to be all that different from the old console other than the driver info center but now that its installed there are so many things I like more about this console vs the old one.

@MowersGoneWILD Жыл бұрын

@PostalRedneck it was all the details that I loved, how you wired it all, and made it special but easy enough to redneck the harnesses and color coded parts on the screen. Great job as always!

@PostalRedneck Жыл бұрын

Thanks. Wanted to make sure the next person has an easier install than me with where all the wires go. Now I need to do this to my Yukon build.

@davetrask2276 Жыл бұрын

Buggy Builders Show? Opening Day? Dog Pound video? These are the burning questions... lol

@PostalRedneck Жыл бұрын

Buggy show unlikely but might go, Opening day depends on the weather and Bolt is doing great and is a joy to have around. All I can say is im ready for warmer weather and summer time fun. Hope all is well with you.

@davetrask2276 Жыл бұрын

@@PostalRedneck I ment Dog Pound offroad park?

@PostalRedneck Жыл бұрын

Are you referring to the dog party at twisted trails? Otherwise never herd of the Dog Pound off road park. Where is that located?

@davetrask2276 Жыл бұрын

@@PostalRedneck yes twisted trails. Couldn't remember the name.

@dennisvan4407 Жыл бұрын

Keep them coming buddy!! First again 😂

@PostalRedneck Жыл бұрын

Heck yeah! I could have gotten first but I let you have it 🤪

@danielb-c9100 Жыл бұрын

Go to the seat shop OEM covers a little expensive but a 110% OEM match

@PostalRedneck Жыл бұрын

I bought this Tahoe for the interior and swapped it all over to my Yukon. I only have around $200 into it as it sits and I just like to mess around with it. Its mostly a gambler 500, winter beater and off road truck and with the frame broken its not worth putting seat covers in. I do know the Seat Shop has good stuff though if I ever did want to do it.

@AlvaroLopez-dn4rm Жыл бұрын

I got a Chevy silverado 2003 what’s another way I can light up the cup holder light Its doesnt have the brown ashtray light cable

@PostalRedneck Жыл бұрын

You could find the illumination wire going to the radio or just find a key on power source near by to tap into. I dont know a whole lot about the 03-07 GMT800's. All 3 of my GMT800's are 00-02.

@garrett-stab4439 Жыл бұрын

Hey got a 2002 1500hd it’s the crew cab 6.0 i just swapped a console into this and wondering how i could wire the dic in i have a aftermarket radio would i be the same thing with colors? my radio is all wired in with the old colors they all match just seeing if that sounds like it would work?

@PostalRedneck Жыл бұрын

Its going to be a bit more difficult as if I remember right there are quite a few green wires but other than that everything should be easy.

@NoSoyYo-TV Жыл бұрын

Do 2002 gmc Yukon dash parts fit in an Escalade 2005 ? I can’t find 03-06 Denali interior parts only 2002

@PostalRedneck Жыл бұрын

2000-2002 dash parts fit in there year range and 2003-2006 parts fit in there year range. Some of the parts will however be the same like the dash pad, vents, and air bag but thats about it. The cluster, cluster bezel, radio, heater controls and glove box are all different.

@FBI-sr2eg 2 ай бұрын

Would this work on an 05 Yukon XL? I can’t think of a reason they wouldn’t but I’ve been blown away before

@PostalRedneck Ай бұрын

This will fit 2000-20006 but you need the whole center console and the glove box. Im not sure on the wiring in the DIC though as the 2000-2002 are different from the 2002-2006.

@FBI-sr2eg Ай бұрын

@@PostalRedneck thanks so much! Now to find a Denali for less than 5k lol

@skyyy5150 Жыл бұрын

Can you go a little more in depth about the cigarettes lighter and light wiring! Trying to tackle that tomorrow I swapped this exact console in my truck and cannot take not having cigarette lighters anymore.

@PostalRedneck Жыл бұрын

Wire it up what ever way works for you. Some of these have more than 3 lighter sockets from the factory. My other truck I installed the same console and ran a wire to the driver kicker 194 bulb so the rear light would work with the interior lights.

@davetrask2276 Жыл бұрын

How about using the center console speakers for your C.B. ?

@PostalRedneck Жыл бұрын

Thinking outside the box I like that. I would have to buy a cheap amp as most automotive speakers are 4ohm and CB's use 8ohm but I could make that work. Thanks for the idea.

@dawsondechaine9197 6 ай бұрын

Hey I’m in some dire need of help lol I’ve done everything in the video so far but now wiring the fuel thing to my bcm and my bcm connectors are different it’s in a 2006 gmc Sierra 1500 5.3 what wire would I connect it too now instead?

@PostalRedneck 6 ай бұрын

This is for a 2000-2002. Your 2006 has the DIC in the cluster already so I dont know what wire you would use.

@cup_and_cone Жыл бұрын

That DIC is worth it just to add the estimated fuel range that doesn't come on 01/02 models! Does the MPG average seem to be accurate?

@PostalRedneck Жыл бұрын

Its a love and hate thing haha. Looking down and seeing 12mpg around town is a hard thing to see haha. Im pretty sure its accurate. I get about 15.8 on the high way and 12.4 around town.

@cup_and_cone Жыл бұрын

@@PostalRedneck yeah, that's accurate. I average around 13mpg mixed.... Not the greatest with these, haha.

@RyjahMoto 3 ай бұрын

Have u fixed the seat they have some nice ones on rufftuff seats covers

@PostalRedneck 3 ай бұрын

I have since sold the truck but I do know they make some paint match covers.

@liluncje Ай бұрын

I'm trying to do this in reverse sort of. Lol. I have an 04 Burb i took my center console out not realizing that i need that for my radio to work. Ugh. I installed a jumper seat because I like how open it is without the console. Guess i gotta out it back in though hahaha. Looks like bose out everything in the console... Amp, sub, etc....

@PostalRedneck Ай бұрын

You could try to hide the amp and everything under the jumper seat possibly.

@liluncje Ай бұрын

@@PostalRedneck I got everything working by switching a plug under the dash really easy . Definitely may try to hide the amo and speaker somewhere it sounds like ass now though lol

@ODESTGAMING 10 ай бұрын

Would this work in a gmc yukon xl 2000?

@PostalRedneck 10 ай бұрын

Yes. Any 2000-2002 GMT800.

@davetrask2276 Жыл бұрын

Come meet WILD J and the Stallions as they pick up their new Baja Bug. Sat b4 the buggy builders show.

@PostalRedneck Жыл бұрын

Dont know who they are. Still not sure if im going or not. My buddies are still undecided.

@davetrask2276 Жыл бұрын

@@PostalRedneck backyard buggies

@davetrask2276 Жыл бұрын

kzfaq.info/get/bejne/kNl0fpaAys-cpH0.html

@PostalRedneck Жыл бұрын

looks like ill be at the buggy show tomorrow. Perhaps ill see you there.

@davetrask2276 Жыл бұрын

@@PostalRedneck delete

@tommydonaldson6345 8 ай бұрын

Where did you get the wiring harness? Thanks

@PostalRedneck 8 ай бұрын

I made it with the parts from the wire harness pulled from the same suv I got the console from.

@tommydonaldson6345 8 ай бұрын

@@PostalRedneck Thanks

@donaldgreen2238 8 ай бұрын

Great work, I’d like to do something similar to my Yukon, which LKQ did you get the parts from?

@grandtheftautotune7715 Жыл бұрын

Wire your CB to those console speakers..

@PostalRedneck Жыл бұрын

I think I might have to try to. I would have to buy a cheap amp as most automotive speakers are 4ohm and CB's use 8ohm. I could probably find an amp for $20 on amazon that would work.