Go Fast Bits Diverter Valve - Install, Sounds and Review F30, 320i BMW
Рет қаралды 48,510
4 жыл бұрынIn this video, I install the Go-Fast Bits Diverter valve on my 320i BMW, F30.
Advice, get the right tools or you'll hate yourself lol.
View my ALL Cars Parts List (F30 and F32/F36)
bit.ly/3cRj5QR
Diverter Valve
www.kiesmotors...
Tools that I used:
Long Ball Hex Joint: amzn.to/3bniKnu
T45 and more hex sockets: amzn.to/32ThyUY
Chose the next build, part, or upgrade, become a Patreon for the Channel!
/ radbavarian
Subscribe here shorturl.at/jluH2, I post videos every week!
My Instagram: / brianpalvarez
Click here to join the N20 Network! n20-crew.mn.co/
Visit Kies Motorsports for your tune! (mention you saw this video)
www.kiesmotors...
Veepeak OBDCheck BLE port: amzn.to/36LK7Fk (use "BLEYTB15" for 15%off)
Spark Plugs (NGK) BMW F30 2016 - amzn.to/39pssGs
Spark Plug Socket - amzn.to/2NL2wgc
Torque Wrench - amzn.to/2M6gbOy
Custom Rotors: / cquencebrakes
Leather Shield for your interior: amzn.to/31YEgve
Leather Cleaning Brush: amzn.to/3kODbO7
Leather Cleaner Shampoo: amzn.to/3mzNiXw
Carbon Eye Lids: amzn.to/3kL5rl4
Front, M-Kidney Grill: amzn.to/2yNWxzY
Push Start Button: amzn.to/2XMozo6
Red V-Brace Vinyl Wrap: amzn.to/2XQM8Mz
Garage Lighting: amzn.to/2XyFCKs
What I use to wash my car: amzn.to/2XQmaIP
Foam Gun (Garden hose): amzn.to/2zRjMtB
Foam Gun for Washer Pressure: amzn.to/3eALl93
Water Pressure I use: amzn.to/3cgvScJ
Best drying towel: amzn.to/3gJeyAz
GoPro headrest mount: amzn.to/3eDStSk
GoPro suction mount: amzn.to/2Mi1GDz
The camera I use: amzn.to/2XHPp0A
My main lens: amzn.to/2TWtfGC
For all Bavarians looking for beemer talk, mods, installs, and reviews.
My name is Brian P Alvarez, and I drive a 2016 F30.
Some of the links above are affiliate links, meaning at no additional cost to you, I will earn a commission if you click through and make a purchase.
@KiesMotorsports 4 жыл бұрын
Yea man 🤙🏼
@RADBAVARIAN 4 жыл бұрын
Thanks again guys!!
@patrickpimpster 3 жыл бұрын
Just installed this 👍🏽 That top right bolt took forever lol. Literally like 4 hours of adjustments with barely any finger room to get it in lol.
@RADBAVARIAN 3 жыл бұрын
haha! that was literally my issue! Hope you enjoyed this!
@htownblue11 2 жыл бұрын
Thanks for the long ball hex tip. It’s the top right hand bolt that has almost no space to access and you have to access it from an angle. With out this tool, I believe you’d have to remove the turbo and manifold to get access to it.
@RADBAVARIAN 2 жыл бұрын
It was for sure hard to install without this tool, BMW made it hard!
@MrGiomig 3 жыл бұрын
Thanks for showing the order it goes in
@RADBAVARIAN 3 жыл бұрын
No problem 👍
@frankieb2220 11 ай бұрын
Loved ur Video bro.Big time Help.Cant wait till I get mines 😎
@RADBAVARIAN 11 ай бұрын
Glad I could help!
@harrisonsmith8195 Жыл бұрын
Notes for F10 N20 - Remove everything that obstructs access the diverter valve: cross brace, engine cover, PCV hose, fresh air intake, breather hoses on air inlet, electrical connectors, L shaped air inlet to turbo (hidden 10mm retaining nut), vacuum actuator and bracket [(2) T45 bolts], air charge pipe, heat shields, coolant overflow sphere. The diverter OEM bolts are T30, and that obstructed bolt can be removed with a long shank T27. After assembling the new GFB+unit, hold it in place with some painters tape over the top to the turbo flange. Slide the solenoid with new spring and piston in from below, then tilting it forward to GFB. Once the solenoid ears get past the block, place a new bolt thru the solenoid ear on the top right. I held the solenoid with my left hand while using a pickup magnet to hold the bolt while I slid it thru that ear. You have to do that before moving the solenoid up and onto the GFB+. It's the only way to get that back bolt into place. If i did this job again, once the old valve was removed, I'd Dremel the block flange that obscures that back bolt to open a channel for the long shank bits
@RADBAVARIAN 10 ай бұрын
Whoa...
@harrisonsmith8195 10 ай бұрын
@@RADBAVARIAN Nasty job for a simple swap out. And I'll probably have to rebuild the turbo anyway. No charge pipe leaks, low boost, and the car still sets the 120318 code
@felipedalcanton7672 2 ай бұрын
Thanks man 🤜🏼🤛🏼..
@phiillzzz807 3 жыл бұрын
Bruh that tape on the bolt was new to me.. if only you could imagine the nuts and bolts i've lost in the engine bays oh man
@RADBAVARIAN 3 жыл бұрын
I learned that after I lost a few bolts, ha! I also use a magnetic rod in case.
@danielhernandez6010 3 ай бұрын
Hey I installed a gfb diverter valve on my 328i and I don’t hear my turbo at all anymore and neither my injen intake any idea why?
@RADBAVARIAN 3 ай бұрын
It depends on many factors, the GFB doesn’t suppress the sound it’s more preventative measures to delete plastic parts to aluminum. It does flutter at high RPMS. My 320i’s induction sounds were loud in sports mode, at high RPMS while downshifting.
@Ryan-tp7wr 3 жыл бұрын
how about the sound ?? i would like to hear before and after .
@RADBAVARIAN 3 жыл бұрын
There is a sound clip at the start.
@alanandrade5356 Жыл бұрын
the flutter noise is not because of the dv+... it's because of your intake
@RADBAVARIAN 11 ай бұрын
Its a combo of both
@obisuspect5824 3 жыл бұрын
will the TURBOSMART BOV KOMPACT EM DUAL PORT VR9 they have work with a 2016 BMW 320i ??
@RADBAVARIAN 3 жыл бұрын
That I don't know, but this GFB was a great mod and update.
@MohamedTarek-qm3vf 4 жыл бұрын
Oh my god, I freaking was looking for that video today because I was thinking of buying one and I was like how come rad doesn’t have one on his car 😂 and here you go released the video today. Here’s a question for you: is there a difference between the dv and a bov? Or they are the same thing ?
@ogog861 4 жыл бұрын
Yep same shit not big differance
@RADBAVARIAN 3 жыл бұрын
They both function differently; one throws air out and the other back in the intake. There is a slight difference in the throttle response, I would say faster and sharper. It also holds more boost.
@ogog861 3 жыл бұрын
RAD BAVARIAN sike
@chrismorris5548 3 жыл бұрын
In terms of sound, Do you think there’s any point having the MST intake and the BOV?
@RADBAVARIAN 3 жыл бұрын
Definitely! The intake alone adds so much swoosh and the diverter valve adds an extra sound
@ad4m_hype Жыл бұрын
Just found your channel and really enjoying ur content what year was your 320i and how much did you pay for it im really interested in buying one ?
@RADBAVARIAN Жыл бұрын
Definitely get one! I bought it used from BMW, I think it was about $28k? It was a 2016 model, Pre lci
@terrencehester4193 3 жыл бұрын
Unfortunately i have a gfb dv+ however i have a pwg and not ewg like the once in the video... im not too sure how to install the gfb dv+ because there is barely little area for space on my 328i pneumatic wastegate
@RADBAVARIAN 3 жыл бұрын
I would check with GFB if it matters having a PWG or a EWG for this.
@Martian305 2 жыл бұрын
One of my hex bolts from top is stripped. How can I remove it?
@m4nzss3 Жыл бұрын
Hi, sorry to ask, what is the size of the long ball hex socket that you used? the rounded head ball socket size ?
@RADBAVARIAN Жыл бұрын
To be honest I'm not sure, I bought a set at Harbor Freights
@kevinuehara41580 3 жыл бұрын
nice video! I have a n20 with intake and GFB dv + installed as well, but it does not make the flutter sound, my inlet is original of the car. Can you tell me how to get the flutter? Doing the inlet upgrade? What modifications do you think I should make. Mine only makes the flutter sound when the car is really hot
@RADBAVARIAN 3 жыл бұрын
For me it usually happened between 1st and 2nd gear at high rpms while downshifting
@kristoffer3000 Жыл бұрын
It's literally the DV not doing its job lol
@PolishPetrolHead02 6 ай бұрын
Does it work on a 330i?
@RADBAVARIAN 5 ай бұрын
Hmmm I’m not too sure. I would reach out to Kies Motorsports and ask them. I believe they had one in their shop.
@SPADERZ216 Жыл бұрын
I cant get that screw out even with the long ball hex joint tool... any ideas??
@RADBAVARIAN Жыл бұрын
Hey! That long ball hex was the only way I was able to get it out. Did you clear the intake/charge pipe, etc?
@SPADERZ216 Жыл бұрын
@@RADBAVARIAN hey, yup! intake was removed inlet pipe etc.. the long ball hex joint tool just would not turn the screw at all! the screw is too tight, the ball joint would spin inside the screw not gripping it enough to turn it, super frustrating, my auto shop said they would have to remove my turbo and manifold to get to that screw and its not worth the labor... idk what to do
@B48Benje 10 ай бұрын
Does this fit on the B48? I have the 320i also but not sure if it fits?? There’s no information anywhere on the forums😩😩
@RADBAVARIAN 5 ай бұрын
I would first check if the diverter valve is the same. B48 is a different layout than the n20
@tienloi199 2 жыл бұрын
to get 2 types of sounds do i need to tune the ecu ( bm3, custom remap ) ????
@RADBAVARIAN 2 жыл бұрын
Possibly? Thats how I was able to achieve that specific spool sound
@patrickpimpster 3 жыл бұрын
Was wondering how you took the piston off the DV?? I was going at it for about an hour and i cant take that apart, so i frustratingly just reinstalled it and gonna go at it another day.
@RADBAVARIAN 3 жыл бұрын
I used the Long ball hex joint -tool 4mm. Without it I couldn't of done it.
@josephcosta2802 3 жыл бұрын
Hey man, awesome video! I'm doing this to my 328i with the n26 engine but I am curious, have you had any check engine lights go on from this?
@RADBAVARIAN 3 жыл бұрын
Hey! Not a problem at all, just cool sounds and an excellent throttle response. So far, drove it over 1,000+ miles and no issues.
@josephcosta2802 3 жыл бұрын
@@RADBAVARIAN another question: how did you get that screw to the right
@RADBAVARIAN 3 жыл бұрын
@@josephcosta2802 I explained to my video about the long ball hex joint. That literally saved my install time.
@jacke8487 2 жыл бұрын
I had it on my car for about 10k miles then it through a check engine light and I had to go back to OEM the n20 does not like it at all it got to the point where the electronic control for the diverter was so far out of spec and couldn't work correctly.. its not worth it
@6470Ryan 3 жыл бұрын
Since broken in, does it still make the fluttering sounds as it did in the short clip from the video? Please let me know thanks !
@RADBAVARIAN 3 жыл бұрын
Hey! It still does on first and second gear, it's actually a pretty cool sound to be honest. I'm going to make a video on all the sounds my car makes this far.
@F80__Los 3 жыл бұрын
Mine doesn’t do any flutter noises it’s it makes a quiet noise is it brokenv
@arthurcoura1921 9 ай бұрын
I installed the same valve, but I didnt get the sound. Do you know why? F30 N20
@RADBAVARIAN 5 ай бұрын
I think that only happens at certain rpm’s and if you have an intake as well.
@Rysuu0. 5 ай бұрын
Prob need an intake
@frankieb2220 8 ай бұрын
BRO...WHAT THE NUMBER ON THAT " HEX WRENCH"??THANKS
@RADBAVARIAN 5 ай бұрын
I guess I did miss this lol
@luisjesusmartinez1030 3 жыл бұрын
Wich are the especific long hex that you use? I want to Buy just one not all the pack🤣
@RADBAVARIAN 3 жыл бұрын
Ha! I hear you, so I used the one that fits the 4mm hex socket.
@scottfriesner1538 3 жыл бұрын
Getting ready to order mine from Kies. Do you have a referral code, or should I just email them and mention you?
@RADBAVARIAN 3 жыл бұрын
I don't man, but yeah let them know you saw my video 😎🙏
@ogog861 3 жыл бұрын
Scott Friesner ebay is cheap rolf
@louis-philipedenis9023 3 жыл бұрын
Is that normal the compressor surge sound, I have the same sound on every level of boost on my n55
@RADBAVARIAN 3 жыл бұрын
Hey! Yes, it's actually the diverter valve that causes that "surge" or "flutter" sound that we are hearing. Now that my car is adjusted, it only occurs in sport mode from 1 - 2 gear.
@louis-philipedenis9023 3 жыл бұрын
@@RADBAVARIAN okey good and how did you adjust that?
@RADBAVARIAN 3 жыл бұрын
@@louis-philipedenis9023 it actually adapted in its own. Soon I'm making a video on all the sounds my car makes
@kennkart 3 жыл бұрын
Hi brian. So on your bm3 video, you mentioned to me that you had installed inlet pipe. What does it do exactly? I have the ftp charge pipe and boost pipe for my f10 n20. Is inlet pipe different than boost pipe?
@RADBAVARIAN 3 жыл бұрын
Hey Kenny! Yeah, it is! The inlet is a preventative upgrade, with the extra boost pushing out due to my tune, the turbo inlet pipe will improve turbo response, increase airflow, and less turbo lag, and lastly add little horsepower. I got mine through Kies Motorsport
@kennkart 3 жыл бұрын
@@RADBAVARIAN awesome explaination. Loud and clear. Yeap definitely will get the inlet pipe too then. Thanks a lot.
@ARTCyberTechEric 7 ай бұрын
is this model GFBT9356 ?
@RADBAVARIAN 7 ай бұрын
I think so? I would ask Kies Motorsports for the part
@kingsflo7036 2 жыл бұрын
Does the car need a tune for the sound I’m reading some people have both dv and intake but no sound
@RADBAVARIAN 2 жыл бұрын
These sounds come out at high rpm’s and while down shifting.
@mitchell.f30 3 жыл бұрын
hey man so i just installed my turbo inlet pipe and same diverter valve & once it was all complete i hardly heard the fluttering noise unless when revved up to high rpms, when driving on the street, i really couldn’t hear it at all, any tips or comment on why that could be? i double checked my work & it was all good nothing left behind. is it a process to break it in first?
@RADBAVARIAN 3 жыл бұрын
Hey! So what intake are your running? My MST really helps amplify all those sounds too. The OEM intake is built to suppress extra sounds for comfort.
@mitchell.f30 3 жыл бұрын
@@RADBAVARIAN i have a injen intake
@marcusbuhay6429 2 жыл бұрын
@@mitchell.f30 any news brotha? I have the same injen intake and it doesn’t make any flutter noises yet, I just installed it last night
@snkrheadrew 2 жыл бұрын
@@marcusbuhay6429 same
@bentwrenchautomotive7 2 жыл бұрын
I installed everything just like you did and I have no sound differences?
@RADBAVARIAN 2 жыл бұрын
Intake too?
@ahmedyoussef7931 3 жыл бұрын
Do you have a link to the part?
@RADBAVARIAN 3 жыл бұрын
Here you go: www.kiesmotorsports.com/products/go-fast-bits-dv-diverter-valve-t9356-f30-335i-f20-f21-m235i?_pos=5&_sid=e13b128cf&_ss=r
@marcusbuhay6429 2 жыл бұрын
what’s up bro! Just installed mine last night, but I’m not getting any flutter noise and my intake doesn’t seem to be letting go as easily as before, do I have to brake it in?
@RADBAVARIAN 2 жыл бұрын
It should give you some sound for sure. It also depends if you have an aftermarket intake or not-the stock intake on an N20 does suppress the sound.
@hammerofluke2013 Жыл бұрын
I got the valve installed and put everything back together and I think I'm getting a boost leak. Not sure what's going on but everything is rock solid my car just won't accelerate properly.
@RADBAVARIAN Жыл бұрын
acceleration? Maybe check your spark plugs and/or coil packs. If you tightened everything right you should be okay.
@hammerofluke2013 Жыл бұрын
@@RADBAVARIAN it started working. I had a small ding on the piston of the valve but after driving it for a while it broke in and works perfect
@CJGProductions 3 жыл бұрын
Which valve did you buy? I want to buy the same one lol 😂
@RADBAVARIAN 3 жыл бұрын
here you go man www.kiesmotorsports.com/products/go-fast-bits-dv-diverter-valve-t9357-bmw-n20-n26-320-328-420-428-and-most-4-cyl-turbo?_pos=2&_sid=42ad83bbc&_ss=r
@CJGProductions 3 жыл бұрын
RAD BAVARIAN thank you
@harveys.2821 2 жыл бұрын
Any ECU codes?
@RADBAVARIAN 2 жыл бұрын
Nope, its a pretty hectic install if you do not have the right tools. But, totally worth it!
@iamchrishundreds 3 жыл бұрын
How much hp gains ?
@RADBAVARIAN 3 жыл бұрын
Not much in HP, but more preventative, boost security and amazing sounds lol
@tylerhemraj5929 3 жыл бұрын
Is this an n26?
@RADBAVARIAN 3 жыл бұрын
No this is an N20
@jerryrodriguez4550 Жыл бұрын
What size is the hex bit thoe ?
@RADBAVARIAN 10 ай бұрын
I think I mentioned it in the video lol
@ogog861 3 жыл бұрын
U got divirter valve same as u stock intake 0 sound lol I hate mst intake u think injen is better
@anthonyaviles1863 3 жыл бұрын
I have an injen. I was definitely not let down. Amazing.
@ogog861 3 жыл бұрын
Anthony Aviles lol il sell my shit car :)
@ogog861 3 жыл бұрын
Anthony Aviles sell
@RADBAVARIAN 2 жыл бұрын
Umm, I think what you were trying to say is that my diverted valve didn’t do much with sound? Maybe listen to the video and you’ll hear it lol
@Xerxesarriola 2 жыл бұрын
came in here for a sound clip.. but no sound clip. =/
@RADBAVARIAN 2 жыл бұрын
You must have skipped the beginning 😂
@serts_ind 2 жыл бұрын
@@RADBAVARIAN is ur car tuned prior to the install? i installed mine today and mine sounds no where close to yours. no tune (yet).. the top right bolt was a bih to install. but i got it all the way in. just not sure if its tightened down all the way. do u think thats why im not getting the same sound urs is? thanks for the reply.
@RADBAVARIAN 2 жыл бұрын
It only happens on high RMPs, it fluttered that way at first then it only happens when in Sport and high RPMSs
@StockTurboN20 2 жыл бұрын
I recently tried to install mine couldn’t get the Wastegate wires unplugged am I just being a sissy not wanted to hurt my fingers trying to get it off?
@RADBAVARIAN 2 жыл бұрын
Lol. It does take some time, and I did have to remove a few things.
@StockTurboN20 2 жыл бұрын
@@RADBAVARIAN I think I could get it I’m gonna take more time and be patient
@StockTurboN20 Жыл бұрын
@@RADBAVARIAN 10 months still not installed I got froggy just now and just started watching N20 turbo flutter videos and now I wanna try and actually do it.
@cristianosoriogutierrez76 3 жыл бұрын
Amigo, una consulta, me ayudas por favor. Según tu producto es un (GFB-DV+ T9357 de www.kiesmotorsports.com/). ¿ es correcto? Lo otro, he visto videos que también instalan este producto pero no da sonido alguno, según tu video, si produce un sonido super genial. Yo poseo un BMW F30 320i Motor N20B20. ¿Es posible instalar este producto y obtener el sonido? Me refiero en el minuto 0:35 Muchas gracias, saludos desde Chile.
@RADBAVARIAN 3 жыл бұрын
También ayuda tener una Intake, esto ayuda con el sonido.
@RADBAVARIAN 3 жыл бұрын
Hey Fam! Join out the N20 Motors Exclusive Network; it's available through mobile and desktop app. Click here n20-crew.mn.co/ Also, download the app after you've requested mightynetworks.com/app Once you've joined, post a photo and introduce yourself!
@hishamhab9564 2 жыл бұрын
Hey @rad bavarian, what lubricant you used to lubricate the GFB diverter?
@water3366 Жыл бұрын
@@hishamhab9564 oil
@carlosjoseedreirazambrano3949 3 жыл бұрын
Un farsa si no remueves el turbo la válvula no sale, The video is fake you need remove turbo if you dont remove turbo the valve does not come aut
@RADBAVARIAN 3 жыл бұрын
You are totally right, I wonder how I was able to do it without removing the turbo. lol
@danielmacias8254 2 жыл бұрын
Bro ur just bad
ТВ3 - сериалы и шоу
Рет қаралды 2,6 МЛН
Thic Whips
Рет қаралды 123 М.
Kies Motorsports
Рет қаралды 100 М.
Fluid MotorUnion
Рет қаралды 573 М.