Looks amazing, great installation always wondered how those go on...those always look great, and with the lights that just makes it even better...
@RedBeardJohnny614 жыл бұрын
Very nice love at flag in background to
@jeremybaxter80703 жыл бұрын
Looks nice for show bars or bed bars ..a roll bar is welded together and built for protection..
@johnshultz30583 жыл бұрын
That's mostly what the bed bars are for nowadays anyways, just for show, but they do look nice
@DSWJoyrideProductions5 жыл бұрын
Blends really well, nice choice!
@metalbeast83Ай бұрын
I know this is an old video but I saw a video where the bars did come with a single plate for the double bars. I just installed a set in my truck an it was a pain in the but where their holes didnt line up i had to weeble a few out to bolt the main bar to the second bar
@WickedFabzАй бұрын
Thanks for the input that’s good to know
@loGNDesigns5 жыл бұрын
Very nice video 👍👍👍👍👍
@JBurger19672 жыл бұрын
I had a 88 Toyota pickup and got a triple double rollbar installed it was all one piece steel, it was heavy as shit. Also had a 4" suspension lift and a 3" body lift with 39 x 12.5 swampers.
@WickedFabz2 жыл бұрын
Awesome! Love the 80’s style trucks!
@callumtaylor38124 жыл бұрын
Awesome video !
@user-vj4ll6kh5c3 жыл бұрын
Truck looks awesome
@abeljimenez5943 жыл бұрын
Looks freaking awesome " back to the good old days " I got a 2001 dodge ram 1500 going with double / doubles are this things heavy?
@WickedFabz3 жыл бұрын
Not be bad. 2 of us lifted them into the back.
@Farmor4x43 жыл бұрын
is my bumper dodge ram 2th generation kzfaq.info/get/bejne/fJ-FqrV-tZOvf3U.html
@michaelmichael99404 жыл бұрын
Looks awesome!! I am doing mine today. I was debating not putting roll bar in. I didn’t want lose my bed liner. I was told not to install roll bar directly over bed liner. Because water will eventually rot the bed.
@WickedFabz4 жыл бұрын
Any water under the bed liner should exit out the back. Maybe cut the liner where it mounts to the bed to get a nice fit.
@timp30355 жыл бұрын
The Black offsets the Silver !! Looks Good !!!
@joesamaniego46644 жыл бұрын
Thinking of getting double single, you still happy with them any any additional recommendations?
@WickedFabz4 жыл бұрын
I like them.. Double / singles will not take up much bed space. I still have room to do what I need to.
@user-vj4ll6kh5c3 жыл бұрын
Súper nice !👍🏻
@autosalvage5 жыл бұрын
love ur dodge ram my 02 was white ex 4 door cab
@itsam3xican1263 жыл бұрын
Where did you run your wires for the KC lights. I have single/single, with the 4 on top. I just don’t know how to run the wires to keep them hidden, thanks.
@WickedFabz3 жыл бұрын
Thru the bars. It takes some patience but can be done. Start at the top just below the curve and come out the bottom before the base plate. Do that in the inside facing the cab to hide the holes. Easy to do before they are assembled and put in the bed of truck.
@itsam3xican1263 жыл бұрын
@@WickedFabz ok thanks. I put and bolted everything on now. For now they are for show. I’m thinking about bedlining the bed or at least painting where I drilled to avoid rust, since I have a truck that just doesn’t seem to like the salt. (1997 Nissan D21 4x4). So did you run the wires through the main bar, or the kicker? I also see you fed the wire through the little hole for the lights, did you snip the end of the connector and feed it through? I don’t have the money to mess something up, and I’m only 15 so I’m trying to learn as much as possible before I do anything. Thanks
@WickedFabz3 жыл бұрын
I’m currently overhauling mine into a show truck. I bedlined it before installing the bars.
@cenmike823 жыл бұрын
Looks really good
@RedBeardJohnny613 жыл бұрын
LineX bed liner could make it look good to but that's your choice truck looks wow
@WickedFabz3 жыл бұрын
Already done. Truck is getting resto.
@RedBeardJohnny613 жыл бұрын
@@WickedFabz y yea
@Chefjasondebo874 жыл бұрын
Sick truck
@WickedFabz4 жыл бұрын
Wait till you see the rebuild. Got other vids on what we are doing!
@Chefjasondebo874 жыл бұрын
I’d like to see you driving it around not sure if you have any videos of you driving
@WickedFabz4 жыл бұрын
I’ll have to look. But I think I don’t . Only had them on for 4 mos before the restoration started.
@Chefjasondebo874 жыл бұрын
Well I’ll look forward to you driving that sick truck around off road, hopefully you can make it happen
@chaseware31814 жыл бұрын
Why does this channel not have more subscribers? The reason I can think of is people want to hate on this true american man! Not any stupid Sema trucks true stuff with great content cheers from TN man!
@kronos0848 Жыл бұрын
Are they actually 3" tubes? Looks sick.
@WickedFabz Жыл бұрын
Yes. Thanks
@pasqualedemaio919 Жыл бұрын
Nice job on the roll bar. Where did you get your overhead lights from? Thanks
@WickedFabz Жыл бұрын
aaautostores.com
@braedengraham22683 жыл бұрын
I think this mans accent qualified him for that truck
@kizerbread Жыл бұрын
I keep thinking about getting a double hoop single kicker polished for my 1990 Dodge. I'm on the fence 😅 I think they look good. Love the old school look of them. Thanks for the video
@WickedFabz Жыл бұрын
I like the old School look Also
@zaphnathpaaneah31083 жыл бұрын
Where did you get your bedmat from? I have the exact bar on a ford f350 and want to buy a bedmat like yours. Thanks brother
@WickedFabz3 жыл бұрын
From A&A Auto Stores
@zaphnathpaaneah31083 жыл бұрын
Thanks and keep up the awesome vids 👍🏾
@HammerdownMotorsportsUSA5 жыл бұрын
looks good what did they ding you for that set up?
@WickedFabz5 жыл бұрын
They made me an offer I couldn’t refuse....lol
@HammerdownMotorsportsUSA5 жыл бұрын
Wicked Fabz nice I thought about them for my build but was a little pricey and I might want to drop on a camper for the beach
@teagueca1004 жыл бұрын
Just curious how backing out of the garage with the lights on worked out? lol
@WickedFabz4 жыл бұрын
Awesome! Not a problem. I have oversized doors.
@rajivravio9 ай бұрын
Did you have to bolt the bars in from underneath the truck after drilling the holes? Not sure how to access the underside of the bed
@WickedFabz9 ай бұрын
Yes you have to bolt them in.
@rajivravio9 ай бұрын
@@WickedFabz are the spots east to access or did you have to remove anything?
@cotynietling25672 жыл бұрын
Great video i want one of these for my 97 f150 cant find them anywhere
@WickedFabz2 жыл бұрын
Check with a&a auto stores. Link is in the description.
@michaelteague6710 Жыл бұрын
I know this is a old post but how did the 900b bar hold up the one the lights are mounted to I was thinking of getting one but it has mixed reviews
@WickedFabz Жыл бұрын
Awesome. Worked well. And held up good.
@michaelteague6710 Жыл бұрын
@@WickedFabz ok thanks I was on the fence about it didn’t know if it would hold the weight of the four day lighters I want to put on
@ericshaw64384 жыл бұрын
What is the name of the bar that is attached to the sports bar that holds the lights? I bought a Rhino bar and need to mount the lights. I need to know what to buy to attach the lights to like you have. All 4 of your lights are attached to this bar and then mounted to the sports bar. That is what I need....
@WickedFabz4 жыл бұрын
That bar across the top is also mage by go rhino. It’s the light bar and the part num is 900B
@ericshaw64384 жыл бұрын
@@WickedFabz Thank you so much. I just placed my order.
@frankevans66143 жыл бұрын
How did you run your KC light wires?
@WickedFabz3 жыл бұрын
I ended up running down thru the bars.
@fernandocervantes10062 жыл бұрын
@@WickedFabz but how exactly did you do the wiring. I have the same bed bar in chrome.
@abeljimenez5943 жыл бұрын
A single plate it's easy to make yourself
@jonathonstriebeck93444 жыл бұрын
Dumb question...how/where did you run the wiring for the lights?
@WickedFabz4 жыл бұрын
At the time the wiring wasn’t done yet., truck is now getting a complete overhaul and the wiring is going to run down the inside of the bars to hide the wiring.
@jonathonstriebeck93444 жыл бұрын
Wicked Fabz ok, thanks for the response. I have the single/single with the light bar in my 97 Ford Ranger and really don’t want to zip tip the wires to the outside of the bar. I’m assuming you need to drill holes to drop the wires in and out of the roll bar?
@kevinolsen6441 Жыл бұрын
I am looking at getting a double/double set of these for my 2004 f250 crewcab shortbed 4x4 lariat powerstroke mainly because I'm horrified of that $1.7billion rollover case going on these years. Would these offer anymore rollover strength/protection for my cab and kids in the backseat? Not that I intend to do crazy offroading I'm just so scared at this point of getting t-boned or having to swerve or something and rolling over
@WickedFabz Жыл бұрын
These bolt to the bed. True protection you would want to have a set that is thru the bed and welded to the frame of the vehicle. However something is better than nothing and should add some protection.
@kevinolsen6441 Жыл бұрын
@Wicked Fabz damn you're right, thanks a lot mam. Quick response on an old video. Good looking truck btw
@otrlifestyle26822 жыл бұрын
How bright are the light bar lights? And are they kc lights?
@WickedFabz2 жыл бұрын
they are halgen kc lites, 200w. going led soon
@ianscott10004 жыл бұрын
Was you able to get out of the garage?
@WickedFabz4 жыл бұрын
Yes. With the light bar it came in at 7’8”. I have 8ft doors
@ianscott10004 жыл бұрын
Wicked Fabz good deal. It looked close.
@MrThekingofrock974 жыл бұрын
I want to buy this roll bar for my truck along with a chest tool box. What is the widest box that will fit between the bars up against the back of the cab?
@WickedFabz4 жыл бұрын
To be on the safe side, 4ft would work well with them.
@MrThekingofrock974 жыл бұрын
Wicked Fabz thank you!
@danelobe25242 жыл бұрын
Put the bar in place and mark the holes then move the bars and drill....... smh
@powerband5235 Жыл бұрын
Do they make these for stepside beds too?
@WickedFabz Жыл бұрын
I know they use to. But not sure now
@stormwolfgames66366 ай бұрын
No they don't I have been looking into it, let me know if you find anyone who does
@stormwolfgames66366 ай бұрын
No they don't I have been looking into it, let me know if you find anyone who does
@stormwolfgames66366 ай бұрын
No they don't I have been looking into it, let me know if you find anyone who does
@SuperKiller1774 жыл бұрын
What size is the bar the lights mount to
@WickedFabz4 жыл бұрын
It is go rhino part #900B. Around 4 1/2 feet.
@SuperKiller1774 жыл бұрын
Wicked Fabz what about the diameter of it
@WickedFabz4 жыл бұрын
It’s like 2” wide.
@ajmarquez20263 жыл бұрын
In winter are you going to put tonneau cover on it if yes how?
@WickedFabz3 жыл бұрын
Truck is getting overhauled and is now a show truck. “Mud Truck” to “Show Truck” SEMA Build is what we are calling it now. Thoughts were to put a cover on it and we would cut the area out around the bars and do some sewing work. I would use a Velcro type cover to do so.
@jeremycampbell33513 жыл бұрын
What wheel tires and suspension you running?
@WickedFabz3 жыл бұрын
Check my periods vids out on this! Explains everything. 5” skyjacker, 16x10 dc2 with 35x12.20 boggers. Truck is getting a total make over.
@cbradiomizfit75623 жыл бұрын
How long it take u for install?
@WickedFabz3 жыл бұрын
Not long. Maybe 2 hours.
@Vibes365793 жыл бұрын
3:59 so we all gonna ignore the confederate flag in the back 😅
@stormwolfgames66366 ай бұрын
Lol your name is literally "black power cartel"
@Vibes365796 ай бұрын
@@stormwolfgames6636 I know but u have to understand what it means and what they flag represents to my people n the destruction behind it
@stormwolfgames66366 ай бұрын
@@Vibes36579 Jesse lee peterson doesn't seem to care and he grew up during jim crowe days. You know there were blacks who fought for the confederacy right? It represents defiance to the federal government to us not just slavery.