Go Viral 🚀 Tips

Рет қаралды 195,703,800

Tool_Tips

Жыл бұрын

Пікірлер: 9 000

@TheBlackBrickStudios Жыл бұрын

I'm pretty sure I lost braincells watching this...

@peterkelly359 Жыл бұрын

Yes me too

@darkpasta9297 Жыл бұрын

Yeah too late. No recover. Ever

@NeverSett1ed Жыл бұрын

uh… why?

@kirakira9906 Жыл бұрын

@@NeverSett1ed Because they act like experts and find this stuff dumb

@LostInUnison Жыл бұрын

@@kirakira9906 maybe because its misinformation 🤔

@josiahday Жыл бұрын

You really don't need a liquid to keep yourself from stripping a screw, you just need to control your torque

@joshturner9766 Жыл бұрын

Or pick the right drill bit lmao

@tobiasfeil1993 Жыл бұрын

Just use Torx. Why does Philips even exist

@mrmg4267 Жыл бұрын

Torx may be hands down the best invention this side of the Mississippi.

@hukamsinghsingh1567 Жыл бұрын

well he use liquid as an lubricant 💜

@SVlad_667 Жыл бұрын

@@tobiasfeil1993 IIRC Philips was specially designed to slip, so it wouldn't rip off screw heads on tools without torque control.

@Submersed24 Жыл бұрын

As someone who doesn’t do construction work this video taught me a lot. (Well not the video, the comments of the video actually)

@kugelblitz1557 Жыл бұрын

Good because if it was the actual video you probably would have ruined something by now.

@kingkiler2k Жыл бұрын

Ok so first two he predrild a hole the zip tie is A)Ugly B)You need two to keep it from falling over and the last one he put too litle

@amidcelilov5181 Жыл бұрын

jcsurcjdjsjfdjsovjfkzcvuekgjcjxudjrfuvuwusjfjduuuuuuuùcuduuddufuufzj

@Lee-db5iv Жыл бұрын

* drills screw in at angle and sticks through wood * “oh sorry guys you actually have to dull the screw and it should straighten itself out 👍 no need to like aim properly or anything crazy”

@mrs.dr.spencerreid3992 Жыл бұрын

😆🤣😂😅

@Scrimmy7 Жыл бұрын

@@mrs.dr.spencerreid3992 ppp

@TimTimTimTimTimTimTimTimTim Жыл бұрын

I also like how in the fourth one he did it properly by putting in holes before he put in the screws to completely avoid splitting the wood in the first place.

@Mecharnie_Dobbs Жыл бұрын

That's why the screw-manufacturers include that part on the end of the screw, because they want the wood to spit.

@f4degam3 Жыл бұрын

He used the wrong drill too 💀

@eyeballzplays1060 Жыл бұрын

‘How stupid do you think people are?’ Them: Yes

@izzaouikamal7735 Жыл бұрын

Bravo merci

@letsomethingshine Жыл бұрын

I am so confused by everything :((

@crusadebirb4084 Жыл бұрын

3.9 million people are damn stupid apparently tho…

@user-tv5po7wm4h Жыл бұрын

@@izzaouikamal7735 ppppppppppppppppppp

@sakshamparmar9240 Жыл бұрын

Just because someone does not have knowledge about construction does not make them stupid.

@JamesterIsDivergent Жыл бұрын

Ah yes, cutting the end off a screw makes it so you don’t put it in faultily 👍

@yulles225 Жыл бұрын

and nailing a nail nails a nail.

@illkissyourightnow Жыл бұрын

right. look at the angle he screwed them both

@sheepdavis Жыл бұрын

"Faultily" is not a word

@drew8570 Жыл бұрын

Faultily?

@JamesterIsDivergent Жыл бұрын

@@sheepdavis it literally autocorrects; it’s a word mate. Next time you’re gonna correct someone make sure you’re right yourself google definition is literally ‘in an inaccurate manner’

@rodrigopina322 10 ай бұрын

Great book for a beginner . kzfaq.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ this book really starts from the beginning, as in it explains what basic tools are and how to use them. But when it gets to the art of creating joints and how and when to use them this book really starts to teach you something. At least that was my experience.

@JakeKoenig Жыл бұрын

Clipping off the end of a screw will keep you from holding a drill diagonally, apparently.

@romabrii Жыл бұрын

And putting wd40 on one keeps you from using the wrong size bit and stripping it

@thecreator8353 Жыл бұрын

Lmao 😂

@frikkiesmit327 Жыл бұрын

Hehehe. Just imagine if he used wd20 what could happen.........😂

@17Scumdog Жыл бұрын

It does work on nails though. Although you don't have to cut it, I keep a file in my tool belt for a lot of different reasons, one is a few swipes on the tips of some collated nails will help prevent spits on things like deck spindles. Whole idea is that instead of wedging the fibers apart it punches right through.

@historyman9436 Жыл бұрын

As someone who actually works in construction, this Hurts on so many levels

@definitelynotat-rex72 Жыл бұрын

In what regard?

@Mellow419 Жыл бұрын

As someone who doesn't work in construction but has a dad who works in construction, I was simply shocked by the absurdity.

@rest1585 Жыл бұрын

Dang not me actually believing the video 😭

@historyman9436 Жыл бұрын

@@definitelynotat-rex72 Most of these "issues" are really just mistakes by the person who did this video. Take the screw that split part of the wood: It was probably sitting at an angle, or it was too close to the edge of the wood (hard to tell, maybe even both lol) The first one, i actually have no fuckin clue what happened. Most i can think off the top of my head would be that the poster switched the direction of the drill while still forcing the screw in. As for the third one, just use the proper parts. It'll last longer and look better. The 4th one, i truly never had to deal with it, it *might* work, but here it hurts that the poster doesnt properly show it, someone who isnt too smart on the subject may try to have both screws be in the middle. And the 5th one, idek. I dont think ive seen that thing before, could be wrong and just didnt see that specific piece. But wtf is OP doing with the wire? Theres a reason for the spaces....

@epicdude1944 Жыл бұрын

@@historyman9436 looked maybe, like his bit was worn out.

@HowardSkub Жыл бұрын

Reminds me of that glasses commercial where they are like “your glasses 👓” then they wail on it with a hammer, then go “turbo flex glasses 👓” and lightly tap it

@gabendorf6470 Жыл бұрын

Lmao I saw that yesterday

@anjurana5429 Жыл бұрын

I saw that just before this short lol

@tylern6420 Жыл бұрын

Needed that comment Normal screw: breaks wood because its pointed in the wrong direction Turboflex screw: goes in fine

@maianimalhive8730 Жыл бұрын

Oh yes i also saw a meme for it like he throw his other phone and shoots it in a ring and the the turboflex phone reference he just lift it up for a bit and slowly put it down XD

@commandercorl1544 Жыл бұрын

That is a perfect comparison

@pinkguycomments69 Жыл бұрын

Remember men, you got to use a little lubricant on your old screw so that it can drill in nicely

@Drud Жыл бұрын

I see what you did there 😂 Brooo

@Drud Жыл бұрын

BTW I was the 69th like

@testsalv4366 Жыл бұрын

I just found a new way to mess up my work.

@SempreFerrari Жыл бұрын

I like how the first tip is so successful they don't do it in the second clip

@thefourshowflip Жыл бұрын

I’m willing to bet money that in the first clip…they just quickly adjusted the torque setting from a lower number to a higher one…

@strictlyscouts7693 Жыл бұрын

@@thefourshowflip he switched bits from a Philips to a torx but as well

@Dave-dh7rt Жыл бұрын

@@strictlyscouts7693 no he actually didnt. You can see the metal shavings on the bit

@mohmdmohmmd620 Жыл бұрын

ما حد يكون يعرفك المطبخ ما تسافري حلها هيثم هذه تراسله كان المحكمه الحمد لله رب العالمين حالي مو بيتنا احط لها 14 14 واحطه بيها 14 14 كانون والدعاء العام وابوي وابوي ابوي ابوي جرى عليه بكلمه تحكم عليه بالمحكمه

@mohmdmohmmd620 Жыл бұрын

٥ تحكم علي المحكمه البر ما يتكلم ولا هينيق بكلمه طول حياتي اكبر ما هي الكلمه وكلت ما وكلت المحكمه من وين جابوا هذا الخبر

@dadikkedude Жыл бұрын

Using the correct drill bit for the screw works better than lubrication.

@dodowhisperer2114 Жыл бұрын

And turning the torque up

@1Mrhustler Жыл бұрын

Or not tilting the driver halfway through!

@junior523 Жыл бұрын

Or just not being an idiot.

@noahschmidt8841 Жыл бұрын

That’s not what your dad said…..

@geekchick4859 Жыл бұрын

Until you have a house like ours where you can pre drill, adjust the torque, speed etc and it STILL gets stuck. The lubrication is a good idea. I needed the yesterday.

@flipsidegaming979 Жыл бұрын

Bro literally just angled the screw better on the second one😂

@nathanwahl9224 Жыл бұрын

Just keep a candle around instead of putting messy lube on a screw. Rub the candle over the threads a little, the wax works great, and no swelling of the wood fibers or mess. To make it work even better, flame the screw briefly to melt the wax; super easy installation.

@michaelboggs8354 Жыл бұрын

Construction workers everywhere: "LET ME AT 'EM!!!!!!"

@rcams1 Жыл бұрын

Underrated comment

@tropicalsand2150 Жыл бұрын

LET THEM AT EM !!!! I dont fully know wtf i just said but i will keep it that way :D

@jlwalker2965 Жыл бұрын

Yupp

@koversz Жыл бұрын

youtube algorithm: this guy will watch literally anything look this joke was stolen LOL(edited 3 weeks after posted)

@tosindoesstuff6573 Жыл бұрын

😂😂

@novaa9522 Жыл бұрын

Why do you gotta attack me like that 🤭 Alright i am off to work!! ✌

@luckyalex3783 Жыл бұрын

😹😹😹😹

@koversz Жыл бұрын

lol this was a stolen joke

@dineshfalwadiya3282 Жыл бұрын

😂😂

@Real28 Жыл бұрын

Imagine stripping a screw because you didn't apply downward pressure.

@GoodG24 Жыл бұрын

Showed my dad this video, He went nuts

@ViquelOoste Жыл бұрын

Like you pfp roughly ?

@guess_who_21 Жыл бұрын

@@ViquelOoste was ready to say same shih lmfao

@guess_who_21 Жыл бұрын

I wanna do this too lmao

@Akuba Жыл бұрын

I love how he had to speed up the first to clips to hide the fact he just screw the screws in with low speed.

@dasburstling Жыл бұрын

there’s also the concept of applying pressure but eh, he’s already got his views

@jermihalia9418 Жыл бұрын

He didn't speed it up. And speed has nothing to do with it. Why don't you learn something before you make a dumb comment.

@jermihalia9418 Жыл бұрын

@DawnXofXFear | TC never

@rykerstayton9577 Жыл бұрын

It pushing that stops it from stripping

@firewhite Жыл бұрын

@@jermihalia9418 speed could totally be a reason tho, wdym, also chill

@mikerotch1249 Жыл бұрын

Sometimes I like to roll around in my neighbours garden and pretend I’m a potato 🥔

@en_aniya Жыл бұрын

was that you??

@boono2912 Жыл бұрын

Why not in your garden 😅

@memyself6095 Жыл бұрын

@@boono2912 the thrill of getting caught 😉 we all have that in us what ever ur kink

@illuno--bf8dx1bw5j Жыл бұрын

I feel ya bro😔

@liamward78 Жыл бұрын

So that's what that noise every night is

@ranchgoeswitheverything9478 Жыл бұрын

Instructions unclear: got fired from construction job

@Reedo265 Жыл бұрын

Pulling harder on the trigger and not purposefully making sure it goes the wrong way works better than whatever in the world you did.

@Swagartist Жыл бұрын

Trying to understand this while my last two brain cells fight for victory

@dkb8125 Жыл бұрын

Considering your pfp, I don't doubt it

@Swagartist Жыл бұрын

@@dkb8125 ?

@your.paralysis.demon. Жыл бұрын

@@dkb8125 cold

@madsam7582 Жыл бұрын

First one: screw 1 failed because they were using an impact drill without proper pressure, then 2 had a standard high tourqe setting to go in easily, the oil is 🧢! He second one they put a normal screw with no pilot hole at the edge of the wood so it blows the grain out, then the next screw is self tapping, and they did it further back, the clipping the end is also BS! 🧢

@creeperzombie6996 Жыл бұрын

I wonder why you got two.

@fatalcurrent9228 Жыл бұрын

I like how in the first clip it was him showing how you can lubricate the screw to make it go down easier, and in the second clip he did it with ease without the lubricant c:

@zek1m Жыл бұрын

My favorite part is he goes from a Philips (prolly wrong size) to a torque bit Much easier to strip the Philips

@AshokaMazda Жыл бұрын

@@zek1m Nice catch

@fashionsta Жыл бұрын

😂😂😂

@jamv2122 Жыл бұрын

Or i dunno pre drill the hole prior

@MoA-xv7yw Жыл бұрын

The first clip was a life lesson

@helIooooooooooooo Жыл бұрын

I used to do tech theater in hs and to avoid stripping screws we were taught to hold the drill with one hand and put the other on the back of the drill and push while we drilled. never stripped a screw when doing that. (until we had to take out the screw when dismantling the set. we lost so many screws that way)

@AylalikeKaylawithouttheK Жыл бұрын

You know how quick I was to think “wow these are so cool and helpful” only to read the comments and find out if I ever tried this I’d be an idiot 😅

@adub1300 Жыл бұрын

“Do not recommend this channel”

@Colonel_Flanders Жыл бұрын

That's the spirit

@ROT4RYfc3s Жыл бұрын

Greatest feature on KZfaq

@TJPhillips23 Жыл бұрын

I felt that

@TJPhillips23 Жыл бұрын

@@ROT4RYfc3s not quite it don’t work 2/3 of the time

@sketchflix6425 Жыл бұрын

Gonna do the same

@TarotVylan Жыл бұрын

Feels like I just deleted the last 13 years of holding a flashlight for my Dad

@Ratblarg Жыл бұрын

Yea I think I forgot what a sprocket is...

@rapperogsmooth2783 Жыл бұрын

@@Ratblarg tf is a sprocket 😂

@Ratblarg Жыл бұрын

@@rapperogsmooth2783 ... I can't remember...😨

@BukitMan Жыл бұрын

I think that a single gear among a set of gears is one of the sprockets. Sprockets are chain driven instead of gears meshing together.

@mohammedaliyu1437 Жыл бұрын

😆😅

@Hirameki_Oktavian Жыл бұрын

Можно просверлить отверстие мелким сверлом а потом туда загнать саморез. И обратите внимание на текстуру древесины когда человек загоняет правый саморез. Нужно ведь всё учитывать

@D1AR266 Жыл бұрын

А ещё, нужно было при закручивании правого самореза держать шуруповёрт под тем же углом по отношению к поверхности древесины, что и саморез - тогда любой саморез вкрутится)(с левым саморезом так и сделали)

@user-uo7mn7yh2i Жыл бұрын

@@D1AR266 согласен первый он закрутил криво а второй прямо и в чём прикол.

@joppless943 Жыл бұрын

Yes, oil up that wood screw.. that wood is gona LOVEE that 🙃

@sabuhibabayev7277 Жыл бұрын

😂

@xxquexx9548 Жыл бұрын

*yes.*

@KeVIn-pm7pu Жыл бұрын

@nyet _ wd40 is oil. It cant evaporate its inside the wood

@jaf_.r7 Жыл бұрын

@nyet _ خ

@beepboop7345 Жыл бұрын

@nyet _ ayo wait actually? Thats weird as hell

@spacetexan1667 Жыл бұрын

Notice how the bit isn’t straight on the first screw...

@PeachKoolAid Жыл бұрын

it’s the tape around the bit, not the actual bit itself

@spacetexan1667 Жыл бұрын

@@PeachKoolAid pretty sure it’s the angle and amount of pressure (I do see some material falling off but that dude wasn’t trying was the deal)

@spacetexan1667 Жыл бұрын

@@PeachKoolAid you’ll also notice on the second clip the screw is angled further back from the camera (so that it looks straight to the cameras eye)

@PeachKoolAid Жыл бұрын

@@spacetexan1667 interesting… not saying youre wrong just thought i saw it different

@spacetexan1667 Жыл бұрын

@@PeachKoolAid who knows (I did see the shavings around the screw but I thought they were to metallic in appearance to be tape) But hey maybe we’re both right/ both wrong Either way we aren’t idiots 😂❤️

@seanredfernan2335 Жыл бұрын

I haven’t seen a video this channel posted that didn’t have ang backlash so far. 😂 It’s like they’re asking to be dissed.

@stevenharbinger2427 Жыл бұрын

"The best way to teach someone how to do something, is to show them what not to do." - This guy probably

@coco8987 Жыл бұрын

R.I.P to all those braincells lost during this video.

@thegrantula1781 Жыл бұрын

You just repeated the comment above you?

@thegrantula1781 Жыл бұрын

Why not just like the other dudes comment, instead of being a parrot

@grumpify9709 Жыл бұрын

@@thegrantula1781 ikr like people rlly be out here seeking attention and it pretty much is working since he got 97 likes

@mattchilds6852 Жыл бұрын

R.I.P to all those brainchild lost during this video

@Ask_me_everyday24 Жыл бұрын

😂😂

@iAxureX Жыл бұрын

i love how for the second one he puts the first screw in at an angle which made it split the wood and the second screw perfectly straight

@mongeeman Жыл бұрын

It's actually a combination of that and the fact that he did it much more violently and closer to the edge.

@coloradohuff6415 Жыл бұрын

Exactly

@coloradohuff6415 Жыл бұрын

I used to build fence and roofs so go ahead and call me a liar but he put that first screw at a angle and the second straight

@noneyabuiznezz Жыл бұрын

Also notice how neither screw split the wood in the 1st 2 examples

@MynameisS_A Жыл бұрын

Same lmao

@daniel_customs Жыл бұрын

Скажите ему пожалуйста, что если надавить на инструмент сильнее и поставить меньше обороты двигателя, то он прекрасно закрутит свой саморез .

@user-hr9kj8pi4o Жыл бұрын

Не факт, зависит от породы дерева. Если твердая: дуб, берёза, лиственница, ель то фиг ты туда что закрутишь или забьешь. Только просверлив сверлом дырку можно будет закрутить или забить

@daniel_customs Жыл бұрын

@@user-hr9kj8pi4o но на видео явно что-то хвойное , не твёрдое )

@FaizanBukhari-zb5ur Жыл бұрын

Algorithm: This guy will watch anything

@YoursUntruly Жыл бұрын

Tip: In order to not crack your work, drill a pilot hole before you sink your screws like the rest of the world already does! :o

@S87260 Жыл бұрын

This video was like regular stuff then turboflex stuff

@YoursUntruly Жыл бұрын

@@S87260 😂

@askjeevescosby2928 Жыл бұрын

But it is true that blunt nails and screws do a better job of not splitting the wood. Idk why wood screws have sharp points. They should be dull.

@cuanmcgovern-bray7497 Жыл бұрын

@@askjeevescosby2928 the amount of times my hands are full and you just poke the screw in by the point so you can get the drill on it. or just when youre working with anything that isnt the softest pine you could buy. although youre right with nails, they cut the fibres instead of separating them but thats only when youre using nails much wider than standard gauge does it have any real merit

@YoursUntruly Жыл бұрын

@@cuanmcgovern-bray7497 ?

@evgenivasileuski559 Жыл бұрын

I was like: something wrong I can feel it And after checking comments I understood, that I lost my braincells so quick, that I could only feel it, not tell what exactly wrong.

@winterlove9554 Жыл бұрын

Đúng là chỉ để xem chứ tôi cũng k hiểu gì luôn =))

@alexyakobchuk4785 Жыл бұрын

SOOOOOOMETHINGS WROOOOOOOOOONG I CAN FEEL IT! COMIN AT YOU SUPER SONIC

@thecutlemon8101 Жыл бұрын

Nah it’s just peer pressure.

@thecutlemon8101 Жыл бұрын

@@alexyakobchuk4785 Stop being cringe asf.

@alexyakobchuk4785 Жыл бұрын

@@thecutlemon8101 LETS GO

@astudent4167 Жыл бұрын

"Hey, this is actually useful" - Nobody

@niwelezlusch9610 Жыл бұрын

Algorithm: this guy will watch everything

@thepioneer1525 Жыл бұрын

"how fake do you want this to be?" *"Yes"*

@rayyaninspookymonth1630 Жыл бұрын

Not fake

@Gelusss Жыл бұрын

@Mote some of it actually was LOL

@Gelusss Жыл бұрын

@@rayyaninspookymonth1630 some was

@rayyaninspookymonth1630 Жыл бұрын

@@Gelusss elaborate how

@xenonslash Жыл бұрын

@@Gelusss which ones? Because the one about the two screws put in diagonally sure aint

@advinnishek3051 Жыл бұрын

Iam completely edited this comment

@OGaasadgaming Жыл бұрын

He nailed it 🔨

@EEEEEEEE Жыл бұрын

@nualapittock4577 Жыл бұрын

BRUV

@bazibon1506 Жыл бұрын

Actually he kinda screwed it up...

@furiousmarc2294 Жыл бұрын

@@bazibon1506 this was better

@Xecutioner62 Жыл бұрын

This is why kids need dad's who know what the hell they are doing😂

@CrocoDylianVT Жыл бұрын

I swear I love it when they fast forward hammering, it's like they're hitting it furiously

@kaizer4506 Жыл бұрын

You can also pee on the screw in the first clip. Basically any liquid is the same because it turns out if you hold the drill straight, you won’t strip the screw

@autobr_ Жыл бұрын

what about hydrochloric acid

@vedantgg7084 Жыл бұрын

What about aqua regia

@lexwelsh3511 Жыл бұрын

😂 true though I can’t believe people like this crap

@Aswdfrl Жыл бұрын

Bro wtf

@Biochemistry-Debunks-Corona Жыл бұрын

Does it work with periods as well ?

@userunaemu Жыл бұрын

It's amazing what pre-drilled holes can do.

@catalintimofti1117 Жыл бұрын

@connorsullivan5996 Жыл бұрын

Also they switched to a torx bit lol

@gabbyjim8943 Жыл бұрын

No he had the incorrect drill bit size

@olliesutton1804 Жыл бұрын

@@gabbyjim8943 He just held the drill straight, you can see the bits of screw still on the bit so he didnt switch it

@lavaos Жыл бұрын

other screws: turboflex screw:

@northernnortherner8749 Жыл бұрын

The screw goes in if you don't tilt it. Also, pre-drill holes, don't destroy a well machined screw.

@arhamalt828 Жыл бұрын

This screams "Your nails VS turbo flex's nails"

@mryoutube9493 Жыл бұрын

Take a dive off a building

@TomAF. Жыл бұрын

LMAOO THATS WHAT I WAS THINKING 😭✋🏼

@pedorroman Жыл бұрын

aad kzfaq.info/get/bejne/Y82Cgthy1dHVdn0.html

@MXTSONMANE Жыл бұрын

I’m dying from the first one 😭

@ansel5848 Жыл бұрын

ong its so bad

@best-bullysscotland1016 Жыл бұрын

Me too 😂

@KobyAustin1 Жыл бұрын

Did he change bits? One a Phillips and the other a torx?

@chrystalhaddaway6736 Жыл бұрын

It looked satisfying until he clipped the drill bit like hmmm maybe I should just aim the right way WAIT WAIT WAIT no that's insane I'll just clip the bit and then it will work like bruh😑😒

@rosamaciel8083 Жыл бұрын

M de ing cromát The first one 😭

@rich6023 Жыл бұрын

Snipping the end of the screw. Back in the day much of the trim I installed was oak. We would snip off the ends of the finish nails so they were blunt. The blunt nail cut the wood fibers instead of spreading them so they did not split the wood.

@cameron3991 Жыл бұрын

Use the right size Phillips bit and you won’t purposely strip a screw to sell a scam product.

@ahleon5912 Жыл бұрын

How useless do you wanna be Him: Yes

@Memer44 Жыл бұрын

How useful are you in the house? Wife/mom: “Yes"

@tylerandari12 Жыл бұрын

@@Memer44 unrelated but so true

@shxbaz2732 Жыл бұрын

Said by a banana tree(@ahleon 59)

@EsdeathandRias Жыл бұрын

@@Memer44 ooo I get it lol

@lordlopes2424 Жыл бұрын

Damn bro you got the whole squad laughing 😐 No really that was super funny tho 😐

@Toolazytothinkofagoodhandle Жыл бұрын

“You see this zip tie with the loop? I’m going to use it for it’s intended purpose.”

@KingJC. Жыл бұрын

Jesus loves you so much he died for you he wants to have a relationship with you accept him before his return, to be saved you must 👇 -Struggle with sin don't indulge in it -Pray to Jesus and get to know him +know he resurrected -Trust in him and do God's will *Sin* 》Gluttony,Uncontrolled anger,Lust, breaking God's commandment,complaining sexual thoughts/immorality,Greed Lgbtq,Lying,lust of the eye.Good deeds doesn't get you to heaven, it's by God's Grace through our faith we are saved.

@shadowreapper2169 Жыл бұрын

@@KingJC. ✝️

@agagagaga378 Жыл бұрын

@@KingJC. i hate these fucking bots

@chrilpy Жыл бұрын

@@KingJC. you worship fairytale characters 🫵😂

@sfzxgamer5340 Жыл бұрын

@@chrilpy lol

@omegabean5880 Жыл бұрын

This is what happens when youtube removes dislikes

@SEREGA-85 Жыл бұрын

Для данных саморезов существует соответствующая бита,которая не позволяет при нагрузке прокручиваться в шляпке самореза

@user-fv2dc2wn8p Жыл бұрын

Все равно со смазкой легче. А нитку надо крест на крест на резьбу наматывать.

@graham1188 Жыл бұрын

This person is a professional at fuckin up on so many levels that everyone feels the need to comment and express their frustration and displeasure, fuckin genius this guy is.

@discordkitten8914 Жыл бұрын

No he’s not for the first one all he had to do was put pressure on the screw

@sjj3lemon267 Жыл бұрын

No pretty sure he’s not a genius

@discordkitten8914 Жыл бұрын

@@sjj3lemon267 exactly

@bluboyd3637 Жыл бұрын

Because experienced carpenter would know it's highly incorrect and could ruin its work

@discordkitten8914 Жыл бұрын

@@bluboyd3637 frrrr

@r1nnrinn Жыл бұрын

This ain’t called going viral this called braincells going extinct

@ma3rdlife813 Жыл бұрын

By design, Torx head screws resist cam-out better than Phillips head or slot head screws. Whereas the tendency of Phillips drivers to cam out under excessive torque has been listed as a feature preventing damage to the screw-head or driver, Torx heads were designed to prevent cam-out.

@rhino5551212 Жыл бұрын

Clip 2, yeah amazing what happens when you drive the screw out of the wood.

@fazelrahman Жыл бұрын

so nice 😊

@fortry8373 Жыл бұрын

When I feel stupid I remember that this guy exists

@rugalbernstein5913 Жыл бұрын

If you ever feel stupid, just imagine the average person's intelligence. Now realize that half of all people aren't even that smart.

@davidperry4013 Жыл бұрын

Use an impact driver instead of a drill to drive long screws

@herymewo2165 Жыл бұрын

srinainaeinoauinin

@jaysgamingandbuildsc5533 Жыл бұрын

Also was at different speeds,

@a.tanner8524 Жыл бұрын

Into wood?

@gshoemake3452 Жыл бұрын

For those who can't afford an impact driver: Use a well fitting bit, any play increases the chance of stripping Drill a hole of a smaller diameter than the nail/screw. Make sure the hole isn't too wide or the nail/screw won't hold.

@thegurw1994 Жыл бұрын

And use Robertson or Torx instead of that trash Phillips Or Posidriv with the actual correct bit.

@nikmidclayton5933 Жыл бұрын

Use bar soap to lube wood screws

@DerDude777 Жыл бұрын

The trick with the oil on the screws helped me a lot when I was repairing our stairs. The thin wood screws always broke off in the steps and then I decided to screw in threaded inserts and the cordless screwdriver could only screw them in completely with a drop of oil on them. I then attached the steps to the insert with M8 screws. Since then not a screw has snapped and if it does happen I can simply unscrew it from the threaded insert in the step. Very good trick with the oil ♥️💪👍

@colonelcrockett2250 Жыл бұрын

The first one you just stripped the screw head lmfao, I’m not even getting into everything else that’s wrong in every way.

@sethmathews1860 Жыл бұрын

I thought they just didn’t put any downward pressure

@bannerlordtv Жыл бұрын

@@sethmathews1860 no the screw is stripped as you can see there is metal pieces and wd40 is for rust and metal lmaoo

@Rocket-Man-765 Жыл бұрын

@@sethmathews1860 true but thats why its stripped. You can see the drill bouncing on in it lol

@sethmathews1860 Жыл бұрын

@@bannerlordtv ah. I rewatched it and I see it now

@user-wq9mf5iv5f Жыл бұрын

Даже мы, русские, так не придумаем)))))

@mathiasdp1289 Жыл бұрын

I love how he just spins the machine way too fast and not fit in well in the screw, and then be like "add some liquid it'll do the trick"

@strictlyscouts7693 Жыл бұрын

Philips vs torx

@Dave-dh7rt Жыл бұрын

Machine? Its called a drill

@kurtcobainii1075 Жыл бұрын

Liquid? Its WD-40. Which isnt just plain ol liquid.

@androanthony5853 Жыл бұрын

@@Dave-dh7rt still a machine

@ifyourmarriedyourasimpanda7440 Жыл бұрын

@@kurtcobainii1075 doesnt matter no one uses fucking wd 40 to drill in a screw, you predrill the hole then screw it in.

@Ea90sweateam 2 ай бұрын

Am I the only one went into a trance and had to finish it and watched more than one time

@Drakewhenheisdrunk 8 ай бұрын

Bro the first one 💀💀💀

@philalan6721 Жыл бұрын

So that's it, I'm just gay now?

@moonagecatamite Жыл бұрын

yup

@danirabinowitz5049 Жыл бұрын

This video is actually where all the gays come from

@mihailmilev9909 Жыл бұрын

@@danirabinowitz5049 we finally did it

@RookieFrnndz Жыл бұрын

LMFAO WTF

@Thee_Gorgonzola Жыл бұрын

@@danirabinowitz5049 shout-out all the frogs watching this vid

@pencilsketch591 Жыл бұрын

Alright I got some tricks to drill the nails properly... "Now, just need a drill" 😂😂

@DoktorTeeth Жыл бұрын

you don’t drill in nails guy. those were screws. you hammer in nails

@Sir.Strongheart Жыл бұрын

sounds like someone's hammered

@pencilsketch591 Жыл бұрын

@@DoktorTeeth oops! My bad... I miswrote it while hammering a screw and got hammered on finger 😂😂

@randomguywhodraws Жыл бұрын

I kid you not, there are tutorial videos on how to make everything. you can probably even make a drill.

@user-pv1gi4bg4w Жыл бұрын

هذه مقطع يستحق الدعم لانه يخلو من الموسيقى المزعجه

@udeshwarsinghsandhu2576 Жыл бұрын

Yes if you have a pre drilled hole, the screw will go in a lot easier no matter if it has WD-40 or not

@bucketsmore1999 Жыл бұрын

When they switched from a makita to a dewalt and made it look like the wd40 made the difference had me dead😂😂

@Personal_CMA Жыл бұрын

Your tripping if you think makita makes bad drills my dad owned his drill for 20 years before buying a new one

@Personal_CMA Жыл бұрын

More like ryobi to dewalt my guy

@CaesarCapone Жыл бұрын

From Phillips to torx..

@luckas221a Жыл бұрын

that looked like the same drill...

@DingersTV Жыл бұрын

same drill, just pressed harder

@foolwitatool3957 Жыл бұрын

Can’t wait to see this on Funk FPV’s channel! Haha

@DanSwa6 Жыл бұрын

Exactly what I was thinking.

@Ask_me_everyday24 Жыл бұрын

Same here!🧑‍🎤

@xelgata Жыл бұрын

i came here to say this as well. great minds think alike

@Ren_Ysidro Жыл бұрын

Okay I knew I wasn't the only one who found this fake. Thank God my uncle was a construction worker and a carpenter!

@bathtub1171 Жыл бұрын

The way to not strip a screw to wood is to put your hand to the top of the drill.

@lee2084 Жыл бұрын

Noted, always make wet before putting in 👍

@dangerunchained3128 Жыл бұрын

...that's what my wife tells me to do!

@agus.l2441 Жыл бұрын

Te pasaste perro jajaja

@yerpy-nya-furry Жыл бұрын

i knew my uncle didnt mean dirty things when he said that!

@scemer3.038 Жыл бұрын

That's wd40 that helps any metal

@ZePHyR-2205 Жыл бұрын

😂

@TacoFusion Жыл бұрын

And here's my sign that I should probably be going to bed

@skunky1-1 Жыл бұрын

I read this comment while laying in bed, 10 minutes from 1am. I think I'll take your lead.

@saia24 Жыл бұрын

@@skunky1-1 seems wise when you come to the same conclusion

@smithyandt5168 Жыл бұрын

2:07 am... me to

@jaydensalma9956 Жыл бұрын

Yer its 9pm imma take ur advice too

@anbeli1691 Жыл бұрын

Ye i gotta sleep After this (Like fr)

@fs_dave Жыл бұрын

Here's a tip; stop using a drill to drive screws. The proper tool is an impact driver.

@liasbreen2318 Жыл бұрын

First tip: for casual repairers not the worst. 2nd tip: decent for hobbyist I guess, when they start out. 3rd tip: why? What does the PVC even do? 4th tip: why the hell did you use screws and not nails for the sheer strength?

@Sticky_sausage69 Жыл бұрын

“Don’t used it the way they were designed to be used, used them this way” - someone destroyed a couple of houses by accident

@jackkraken3888 Жыл бұрын

I'm so grateful for knowing this. I was always nailing the pipe directly onto the wood and it would leak all the time!

@scotts1356 Жыл бұрын

LMFAO!!

@Josephinewechsler Жыл бұрын

DONT LISTEN TO THIS GUY

@Josephinewechsler Жыл бұрын

DONT LISTEN TO THIS GUY!!

@northwestlife2794 Жыл бұрын

Just this video alone has blown my mind!🤯🤯🤯🤯

@williamshortreed7609 Жыл бұрын

As a Canadian we don't use phillip's screw we use Robertson S2. Phillips is only good for low voltage batteries in drills aka small screws drill. Robertson's are superior. 20 volt or higher.

@tokyo_100 Жыл бұрын

Miniac stray kids 😭😭.

@Jae.-. Жыл бұрын

Ping ping

@chris-td2fs Жыл бұрын

👏

@aksacucukakek9222 Жыл бұрын

🤣

@dhubu_dhubu Жыл бұрын

😭😭😭

@maestrono.7746 Жыл бұрын

Yes

@bat7302 Жыл бұрын

For anyone wondering what liquid they used in the first clip, it’s called Elbow Grease

@icyunvme2400 Жыл бұрын

I thought that was just a saying💀

@NopeTote Жыл бұрын

@@icyunvme2400 nah they got gallons at lowes

@Tsmace33 Жыл бұрын

Amd a torqs instead on a Philip

@AnakKampungCina96032 Жыл бұрын

STP

@paragan2009 Жыл бұрын

Nah thats blinker fluid im 100% sure

@harsh.B0SS Жыл бұрын

How many times can you watch this? Me: yes

@MrRegularSizedDude Жыл бұрын

All you need to do is put pressure on the back of the drill my guy

@obj3ct143 Жыл бұрын

This feels like a fever dream

@sneakysquirrel4392 Жыл бұрын

It's 3 am for me and I legit saw nothing wrong until I looked at the comments lmao

@hotman_pt_ Жыл бұрын

Same

@iagentaloe Жыл бұрын

@kagenou6833 Жыл бұрын

Same

@murphywallace9336 Жыл бұрын

2:45 am

@user-abcdefghijklmnopqrstuvxyz Жыл бұрын

It's the middle of the day for me and I saw nothing wrong... i still see nothing wrong even after I looked at some of the comments...

@KingRichardDeLeonheart Жыл бұрын

I love how in every video like this there is always a bunch of construction guys saying how much they hate it

@alejomontoya809 Жыл бұрын

Un video de un minuto aporta más que años de horas de influencers juntos

@GitSumGaming Жыл бұрын

The first one made me understand a certain man’s motives with a unique mustache from the 40s…

@greatmemecentral Жыл бұрын

Ahh Mr Mustache

@GitSumGaming Жыл бұрын

@@greatmemecentral Perhaps he was on to something...

@pravendrajoransv6698 Жыл бұрын

@@GitSumGaming to sahi me bhi

@mrdude88 Жыл бұрын

This video shows the difference between having a kids under 10 doing your carpentry vs José who waits outside Home Depot for work. Always get José

@wrathu22 Жыл бұрын

I'm 10 and I took that personaly

@matchsticknik652 Жыл бұрын

José works hard

@FckingGoPro Жыл бұрын

José nuñez

@the_thornhill Жыл бұрын

If your wood is cracking/splitting like the second one, it's too dry

@BrownGoatEnthusiast Жыл бұрын

Or you've got the angle/positions wrong

@chrisvig123 Жыл бұрын

Never understood why the US would never adopt the Robertson….it’s so much better…would have saved billions in productivity by now 😮

@c4rb0n40 Жыл бұрын

Whattt??💀💀💀