Godox MS300 Strobe - Complete Walkthrough

No video

Godox MS300 Strobe - Complete Walkthrough

Рет қаралды 37,705

Күн бұрын

strobepro.com/...
Our Smallest Wired Strobe Ever
The Godox MS300 is super compact at under 11" long with the modelling lamp installed. This makes it ideal for small studio spaces or if you plan on packing this into one of our Strobepro Studio Kits.
Perfect Starting Point
This strobe is a perfect starting point if you're just getting into studio lighting. It offers features at a price point that is almost unbelievable. It's also a great background or fill light to lights you might already have in the Strobepro/Godox system.
THE STROBEPRO DIFFERENCE
Strobepro is the largest distributor of Godox products in Canada. Give yourself peace of mind with Strobepro's professional helpful staff, 2 year warranty, and Calgary based service centre. Don't get left without Strobepro's industry leading support, included with your purchase for Free!
Built-in X Receiver
The built in 2.4G wireless receiver means the the MS300 is fully compatible with all Strobepro/Godox X series radio controllers. All you need is a controller for full power control and triggering on this strobe. Compatible with Strobepro XT, XT Pro, XTM, Godox X2T, XPro, X1T.
Strobepro/Bowens Mount
The steel mount means every Strobepro lighting modifier will fit perfectly.
Huge Range
The 1/32 power range is remarkable at this price point. This means that you can turn the power all the way down to 1/32 to shoot your fastest lenses wide open.
Fast Recycling
Recycles in less than 1.8 seconds at full power and 0.1s at 1/32
Adjustable Modelling Lamp
The 150w modelling lamp adjusts from 5% to 100% in 3 modes including: Proportional, Full Power, and Selectable Power Level.

Пікірлер: 69

@JamesBrownPhotographics 4 жыл бұрын

Hi Strobepro, the proper way to mount a Beauty Dish or any closed modifier is place it on the floor and mount the strobe head to the modifier speed ring. You will never break a modelling lamp or flash tube if you do it this way. Once the flash head is secured to the modifier, then raise the entire assembly up and mount it on your stand. To remove the modifier, take the strobe head off the stand, place it on the floor face down and press the release button on the head, rotate it to unlock the lugs on the speed ring and lift it away from the modifier.

@dspindl1 Жыл бұрын

I agree although I would just add that you need to get a good grip on the speed ring. I open a vent on soft boxes and hold the speed ring and then turn the light to release it.

@jauntystudios8814 7 ай бұрын

how can i change power output control reading from the (5-10) to(1/32 - 1/1) ?

@xavivkings1838 6 ай бұрын

Love the way you explained every single thing about it, I really needed an explanation for dummies, thanks man, you're the best

@speterlewis 4 жыл бұрын

It's great that it goes down to 1/32, and that modeling lamp turn-off is a nice touch. And now....it's on the wish list! Great video, as always. (And thank you for continuing to support Pentax. Yes, we're still around!)

@TMIDD 4 жыл бұрын

Great light at a nice price i love using it on my channel!

@RaulBlues-cs3oc Жыл бұрын

Thanks Jessy, short and very clear explantion about this model, I appreciate the lesson. Thanks again.

@Strobepro Жыл бұрын

Thanks for watching.

@lisac8540 Жыл бұрын

Exactly what I was looking for! Thank you!

@eastlight6357 2 жыл бұрын

waooo it was really one of the best video to understand the world of the Godox 300. also extra thanks for the great explanation step by step. just great and explained very calmly we are waiting for more learn videos please.

@DavidBrant Жыл бұрын

Just bought one here in UK. Ive used elinchrom and other higher end studio strobes, and for the money, this is amazing value for its feature set. Only down side for me is power range doesn’t go below 1/32, so have to adjust to a sub 100 iso or increase f-stop. Not ideal but again for the price point, its worth it for an extra light for a group kit. Works well with Godox Pro X controller. Great walk through. Thanks 🙏🏼

@tonymonaghan5993 Жыл бұрын

So at 1/32 what aperture is giving you at 100iso for a head shot?

@DavidBrant Жыл бұрын

@@tonymonaghan5993 hmm cant remember, was a while ago - but it was too stopped down for the look i was after. Maybe 1-2 stops off target f5.6 or f8

@TMIDD 4 жыл бұрын

I use the godox ms300 for studio photoshoots on my channel. I love the light and price point but wish it had a bit more dynamic range in its power setting 1/32 being its lowest power setting. Nice video

@pawel6034 3 жыл бұрын

I'm with you, but its direct predecessor, SK300II, could go down only to 1/16.

@kingsleynyawo5676 2 жыл бұрын

Thank you for this great review. This set is definitely on my wishlist.

@bahadorrh6361 2 жыл бұрын

simple word! thank you

@celtphoto 3 жыл бұрын

Thank you. Very useful, and coherent.

@eustacevictor2177 4 жыл бұрын

I own this unit you can't go 9pm with this . live in the Caribbean the only issue I have is that it's 110 volts but other than this fantastic product . I will get a second unit

@user-tv5dt3nm9y 4 жыл бұрын

Thanks for the review.

@ae5320 4 жыл бұрын

GOOD.Thank you

@kmoney2317 6 ай бұрын

Every time I take a photo my screen is white from the flash

@aderinoyeadekunle8623 4 ай бұрын

Mine didn't connect with my trigger

@rpaquin1977 6 ай бұрын

What STEP value do I choose in my X2T trigger? 1/256 0.1 vs 1/256 (0.3) vs 1/128 0.3 vs 1/128 (0.1) vs 3.0 (0.1) vs 2.0 (0.1) ??? Don't know what to choose and WHY. Can someone please explain? THANK YOU!

@Strobepro 6 ай бұрын

Hi @rpaquin1977, Godox's AD lineup of strobes can all reach 1/256 power now, but there was a time when 1/128 was the more common lowest power setting. You can select 1/128 as the minimum setting on the controller if you don't want to have extraneous power settings that your strobes aren't capable of using. In the case of the MS300 (which has a 1/32 minimum), neither of these settings will be very helpful. Just keep in mind that the strobe will bottom out at 1/32 if you select any power setting below that. The second number (in brackets) is your precision setting. You can adjust in either third stops (0.3) or tenth stops (0.1). Adjusting in tenth stops allows you to be very precise, but it is a bit more cumbersome since there is a lot more scrolling involved when you want to make larger changes. Hope that helps!

@vladdomans6353 3 жыл бұрын

Спасибо! Великолепный обзор.

@POCPOC97432 Жыл бұрын

Bonjour je connecte le câble sync mais aucun flash ne se fait lors de la prise de vue avec un autre flash elinchrom ca fonctionne pouvez vous me dire d’où vient le problème?

@RyanNayr 3 жыл бұрын

can you replace the modelling bulb with different brand ? or non godox ?

@vonpotatostein 4 жыл бұрын

Hi! thanks for the informative video! One question: is it convection cooled or fan cooled? :)

@Strobepro 4 жыл бұрын

It is fan cooled.

@franciscojauregui6634 9 ай бұрын

My umbrella doesnt fit the holder its so weird the light holder is blocked by a metalic thingy (not the screw) anyone has the same issue?

@Strobepro 9 ай бұрын

That is the retaining clip. You need to push it through there. If by chance you've damaged it you can remove it and just use the screw.

@viraajvaka2279 23 күн бұрын

can we use it with battery? or its only runs on power?

@Strobepro 19 күн бұрын

This light is designed for mains power, and there is no dedicated battery option for it. That said, there are plenty of general use battery packs with inverters that are capable of running multiple corded strobes at a time.

@tonymonaghan5993 Жыл бұрын

At 1/32 what aperture is giving you at 100iso for a head shot?

@Strobepro Жыл бұрын

Hi Tony, It will vary dramatically depending on the distance of the light to your subject and the modifier used.

@taitruong3903 Жыл бұрын

Thank You 🙏 so much for the tutorial video. My X2T-N works perfectly with both of my Godox V860III flashes. I’m having trouble getting the Godox strobe light MS300 communicating with the X2T-N, although all the settings are correct. Both device and the strobe light are on the same channel 1 and group A. Does anyone out there have encountered the same issue and what the fix is? Many Thanks 🙏

@Strobepro Жыл бұрын

Please make sure you don't have ID enabled on the controller. This is likely your issue.

@taitruong3903 Жыл бұрын

@@Strobepro Got it thank you again!

@SimplyInspiredNZ Жыл бұрын

My hole on the reflector is not in the right position to feed the umbrella through to the umbrella mount. Is this a fault?

@Strobepro Жыл бұрын

Hi Bev, Was your strobe and reflector purchased from us? You'll need the AD-R6 reflector to go with that strobe.

@samchuks9299 4 жыл бұрын

Hi thanks for the information, I want to know the tech requirements for triggering two of this strobes with one Canon 580 EX2 speedlite at once.

@zedbleu4444 Жыл бұрын

Hello Sir. Did you notice if colors seemed right for the advertised temperature or if there was a color cast to correct? Thanks a lot. 🙏peace

@Strobepro Жыл бұрын

Hi Zed, Sorry for the late reply. Colours stayed within the advertized range in our tests. Additionally, there was no notable magenta or green correction required (only small single-digit shifts when we eyedropper a grey card in Lightroom).

@sl3vin_ 3 жыл бұрын

Thanks for the review. Question here: I see you can’t lock the umbrella stick marking unusable in a vertical position when you place it above your subject. Is that correct?

@totiglobule 3 жыл бұрын

Correct. If you want a 'shower light', you need to use something else than an umbrella (use the bowens mount). There are lots to use, not only big softboxes do existe ;)

@xavienpowell705 4 жыл бұрын

Hi, I was just wondering if anyone could help. My modeling lamp won't work no matter what mode I have it in. The bulb seems to be fine, the flash still works but for whatever reason the lamp itself won't turn on. Can anyone help?

@amygarza8550 Жыл бұрын

I have the ms300 and x2t and they are not connecting I tried channel and group any ideas why it wouldn’t work?

@Strobepro Жыл бұрын

Hi Amy, A few suggestions for you: 1. Can you see the channel displayed on your MS300? It is possible to toggle the radio on and off by pressing both GR/CH and S1/S2 simultaneously. The group will still be displayed when the radio is off, but the channel will disappear. 2. Is an ID enabled on your X2T? You can find this in the menu, and it should be set to "OFF" when working with the MS300 since it does not support that feature. 3. Are you quite close to your strobe? If you are within 1m, you can experience spotty triggering. This can be remedied by finding the "DIST" setting in the X2T's menu and setting it to 0-30m instead of 1-100m. Let us know if none of those troubleshooting suggestions hit the mark.

@0191Marko 2 жыл бұрын

At 3:50 you say you’re using a 7ft stand, wow, you must be at least 9ft tall 😁

@Strobepro 2 жыл бұрын

7 feet is the maximum! Haha

@SimplyInspiredNZ Жыл бұрын

I have just bought a kit which includes three lights etc. The hardest thing is mounting the rings on to the strobe head. It is SOOOO hard to move and twist it. Any ideas?

@Strobepro Жыл бұрын

When mounting a softbox, it's best to grab it from behind so that you cah have a bit more control to get the Bowens rings in place. Most softboxes will have an access flap in the back that will allow you to grip them easily when doing this.

@RUMBLEKATmule 4 жыл бұрын

Will these fit upright in your traveller bag?

@Strobepro 4 жыл бұрын

They will! In fact, you can quite comfortably fit up to 3 heads with their protective covers installed and the power cords in the remaining space.

@ae5320 4 жыл бұрын

Although its modeling lamp has 5500 kelvin , why does its color look yellow ?

@Strobepro 4 жыл бұрын

Hi AE. The flash tube is 5600 +/- 200K, but the tungsten modelling lamp is around 3200K. This is why it's a good idea to knock out your ambient exposure in camera, or set the modelling light to turn off during the exposure.

@ae5320 4 жыл бұрын

@@Strobepro Thank you.your answer was informative.

@windimirawan3608 2 жыл бұрын

already HSS? how to activate the HSS?

@Strobepro 2 жыл бұрын

Hi Windi, This model does not support HSS I'm afraid. If you're looking to bring your ambient down, you'll have to use a neutral density filter on your lens.