Godox X3S Trigger: Basic Operation, Flash Syncing & TCM Explained

Рет қаралды 18,177

Күн бұрын

Video Chapters (Time stamps)
0:00 Intro
0:54 Close-Up (quick Unboxing)
1:37 Release Button
2:22 Charging & More
3:32 Mounting Trigger
3:56 Powering ON & Basic Operations
4:35 Pairing (Syncing) & Testing 2 Flashes
8:55 Off & On How Fast
9:25 TCM Explained
Link to user manual (pdf):
godox.com/static/upload/file/...
At B&H, it’s now “Godox X3 S” but used to be called “Godox Xnano S” Touchscreen TTL Wireless Flash Trigger for Sony. (B&H#GOXNANOS)
At Adorama, it’s called “Flashpoint R2 Nano” Touchscreen TTL Wireless Flash Trigger for Sony.
Manufacture: Mfr#X3-S
In this video, I'll show you the basics of the Godox Xnano S (X3S) Flash Trigger for Sony cameras, including:
* Turning it on and mounting it on your camera
* Charging it (including fast charging)
* Operating the touchscreen and buttons
* Pairing and triggering two off-camera flashes
* Grouping and triggering flashes individually
* Using the TCM feature
Here's a quick rundown:
* Compact and portable: Comes in a small carrying case with a wrist strap.
* High-quality build: Made of matte-finish plastic.
* Touchscreen and buttons: Easy to operate with either method.
* Fast charging: Charges from 0% to 100% in about 2 hours using a USB-C cable (not included).
* Wireless range: Up to 328 feet (100 meters).
* Groups and channels: Organize your flashes into groups and control them on different channels.
* TCM feature: Quickly switch between TTL and manual modes.
I'll also cover some tips and tricks along the way!
Note: I wasn't able to confirm if the trigger supports fast charging with the 20W adapter I used. I'll update the description with this information if I find out more.
I hope this video helps!

Пікірлер: 103

@StefanoCasati 5 ай бұрын

Great review, thanks for all the insights and info.

@TossSong 5 ай бұрын

Thank you very much for your comment. I’m happy this was helpful. 🙏

@anthonyfeliciano1881 2 ай бұрын

Thanks for the quick test video, including the viewer fast forward-video segments options. I liked your audio/pace of all of the tips. Your explanation of the TCM feature is worthy of a longer explanation. Godox did not have the AD100 is some triggers. Again this was appreciated. "Hamburger Button"? :)

@TossSong 2 ай бұрын

Thank you for comment and feedback! I'm glad you found the video informative and appreciated the explanation of the TCM feature. And haha yes, the "Hamburger Button" had me chuckling too. Thanks again for taking the time to leave such a thoughtful comment!

@rickymcc9072 3 ай бұрын

Thanks for sharing and showing how they work. Was a tad difficult to see which flash was working at times since head turned away. Anyway I now have one on backorder.

@TossSong 3 ай бұрын

Thank you for your comment. I’m glad this was helpful. Yes, I could have captured the flashes going off a bit better.

@indranilchoudhury4723 5 ай бұрын

Thanku Very Informative 🙏😍

@TossSong 5 ай бұрын

Thank you for your comment. I’m very pleased that this video helped.

@chetanunindracusin664 23 сағат бұрын

Well explain for new flash user

@TossSong 22 сағат бұрын

Thank you for your comment. Glad this was useful.

@AndreMorganPhotography 5 ай бұрын

nice first look at the new trigger from godox

@TossSong 5 ай бұрын

Thank you for your comment. I’m happy that you tuned in.

@finion562 4 ай бұрын

Great review. Is it possible to change the battery? Thanks.

@TossSong 4 ай бұрын

Thank you for reaching out. Unfortunately the battery is built-in and not changeable/replaceable. I would love for it to be but we have to recharge it via a cable.

@TheSunnySuttons 5 ай бұрын

When you slide to adjust the power, can you still see the power level change on the screen or does your finger cover the numbers? The video looks like it covers the numbers which isn't great.

@TossSong 5 ай бұрын

Hi, thanks for your comment. Yes, the level could still be partly seen when touch operate (but your finger would be right on top of the level line, it’s going to cover it temporarily). Don’t forget you could always use the knob to do navigate, select and adjust everything.

@ShaunakDe 4 ай бұрын

Thanks for this video. How do you find it compared to the XProII

@TossSong 4 ай бұрын

Thank you for your comment. I haven’t used the XPro II, but I know of it. The II can flash remotely with your phone the X3 can’t. I imagine the size, the touchscreen and the convenient use of the X3 can be the selling point. The II is compatible with the Sekonic L-858D light meter, if that is something you use. Other than that, I think they both great.

@stefpix 2 ай бұрын

Nice! How can you use TCM with 2 different flashes at the same time? Like an AD100pro and a TT350 or a V1? Is it possible?

@TossSong 2 ай бұрын

Hi, thanks for reaching out. It’s a great idea, but I don’t think is possible for exactly the same time, but you could set one at a time fast. Unless they announce the firmware update for it (I would definitely keep an eye out for it).

@angelisone 3 ай бұрын

Do you know if this (Sony version) can do ATG wireless TTL 2.4GHz on Godox flashes made for Canon/Nikon/Sony/Olympus? Meaning this XNano (X3S) on Sony's MIS (hotshoe) will trigger in TTL (Godox in Slave 2.4GHz) on Godox TTL not for Sony camera I find no information about that like ATG & Jinbei systems.

@TossSong 3 ай бұрын

Hi, thanks for reaching out. The Godox Xnano S (X3S) is designed to work with Godox's own wireless system, not the Jinbei one. It can do the standard 2.4GHz wireless stuff with Godox flashes, like triggering them in TTL and HSS modes. Now, Godox has this special wireless ATG protocol, which is kinda like an advanced version of their regular wireless. For the Xnano S (X3S) to be able to use those ATG features, it would need to have specific support for that ATG protocol built-in.

@chubbypoulet Ай бұрын

Nice review! Would you happen to know if X3S would work with the Godox AD100Pro flash?

@TossSong Ай бұрын

Hi, thanks for your comment. Yes, it will work with the AD100Pro. I also have the 200Pro, works perfectly.

@chubbypoulet Ай бұрын

@@TossSong Thank you for confirming it. I am going to get an AD100Pro then. Cheers!

@TossSong Ай бұрын

No problem. 👍

@FamCamSportsMedia 5 ай бұрын

Any idea when they will start shipping preorders. Bought it from B&H 2 months ago....still waiting.

@TossSong 5 ай бұрын

Hi, thanks for your reaching out. I’m pretty sure yours would be there soon (I ordered mine about the same time). You will be notified when they shipped. On there website, it’s first come first served. And right now, I’m sure they’re continuingly fulfilling orders-that’s why you don’t see it’s in stock.

@morsaPT Ай бұрын

Thank you for the review. "Au point!" Can you please tell if we can change power using the plus and minus touch buttons on the screen or the only way to do this is by using side wheel? Thank you so much!

@TossSong Ай бұрын

Hi, thanks for reaching out. Yes, you could change the power using the touchscreen by pressing “+”. and “-“.

@morsaPT Ай бұрын

@@TossSong So it's possible to hit the group A, press the "+" button and the value of 1/256 becomes 1/128 for group A? Theres no need to rotate that side knob?

@TossSong Ай бұрын

Yes, no need to use the knob. The x3 can max out at 256 + 0.07. If the flash max at 128, the x3 can show pass it at 256, but the flash brightness will stay at 128.

@morsaPT Ай бұрын

Thank you so much for the quick feedback. I saw another review that was pointing this as an issue, since the camera handle and shutter button are on the right side, just like the knob.

@TossSong Ай бұрын

No problem. Thanks for commenting.

@SuperRocket1979 3 ай бұрын

I have a question on how to use the TCM when each groups uses different strobe’s power e.g: group A is using AD100pro n group B is using AD200pro. How select and adjust them differently? Thank you. Your response is highly appreciated.

@TossSong 3 ай бұрын

Hi thanks for reaching out. Sure, here's a more casual and concise explanation: When using TCM mode on the Nano X3, you can adjust the power levels for each group separately, even if they have different flash models. First, make sure TCM mode is enabled on the trigger. Then, use the "Group" button to select the group you want to adjust (A, B, C, etc.). Once a group is selected, use the +/- buttons to change its power level. Repeat this process for each group, setting the desired power for Group A (AD100Pro flashes) and Group B (AD200Pro flashes) individually. You can go back and forth between groups, tweaking the levels until you get the lighting just right. The power levels shown on the trigger may not match the actual flash output exactly, but TCM lets you easily balance the relative power between groups, regardless of the specific flash models used. Let me know how it goes.

@SuperRocket1979 3 ай бұрын

@@TossSong So, in terms of choosing the types of strobe in the TCM mode (flash, 100j, 200j, 300j-1200j) I should just choose one of the highest power of 2 of my strobes which in my case is the AD200pro. Right? Since in your video you demonstrate w/ 2 same type of strobe/speedlite. Once again cheers!

@TossSong 3 ай бұрын

Yes, choose 100j for AD100Pro and 200j for AD200Pro. I also have the AD200Pro also and I tested successfully using 200j on the trigger (off camera).

@TAMaBSTOAUnited 4 ай бұрын

Some of the older Godox triggers skew the white balance. I know Godox released a variant of the xPro that addresses this by allowing “legacy mode”. Did you find this WB issue with this trigger?

@TossSong 4 ай бұрын

Hi, thank you for reaching out and commenting. For me, I haven’t. Possibly because I haven’t used it enough. Did some earlier testing without noticing WB issue. As with any electronic device, everyone’s experiences can vary. Just in case I’m be keeping a lookout for new firmware update, since new devices such as this trigger may need debugging, pretty sure.

@sidbrun_ 4 ай бұрын

What do you mean skew the white balance? You mean the temperature/hue coming from the flash itself? I didn't think the trigger would affect that, I thought it was down to the quality of the bulb.

@TossSong 4 ай бұрын

Hi, I think that Older Godox triggers have extra pins for fancy features, but they can mess with your camera's auto white balance, making colors look off in your photos. While intended for advanced features like TTL, these pins can confuse the camera's auto white balance system. Therefore it can cause inaccurate white balance.

@magsshotphotography2321 2 ай бұрын

how bkout using this as remote trigger does thiis support multishots/burst

@TossSong 2 ай бұрын

Hi, thanks for reaching out. Yes, the X3 supports multiflash mode.

@SirYom 2 ай бұрын

Hi is this compatible with the tt685ii?

@TossSong 2 ай бұрын

Hi, thanks for reaching out. Yes, the tt685ii has a 2.4 GHz X radio system for wireless triggering like the X3.

@adamrosenberg7114 4 ай бұрын

what is the magnetic charging adaptor you used? Thank you.

@TossSong 4 ай бұрын

Hi, thanks for your comment. There are from many manufacturers. The one in the video is from AliExpress (search “magnetic adapter usb-c”)-for very cheap. On Amazon is below. a.co/d/1OqifWA

@adamrosenberg7114 4 ай бұрын

Thank you!@@TossSong

@jaym5938 4 ай бұрын

Godox states we will get Legacy Hotshoe feature in a future update. Interesting that my Nikon X3 came with 1.0 firmware; but, the Canon X3 came with 1.12 firmware. Your gear looks like you never actually use it...unless making a video?

@TossSong 4 ай бұрын

Hi, thanks for your comment. That would be awesome for the feature that may allow the flash to work with older cameras. For the firmware, I should still be patient but still checking for new version, since a new product is likely need bug fixing, tweaking and making it more compatible to the camera it’s made for. About my gear (keen eyes you have), the small flashes don’t see much of light of day, because I use more powerful ones like the V1 Pro and AD200Pro. Therefore, those in the video can be considered for testing. But I do use them on occasion for small gigs And clean them immediately. As for this camera, I do take care of it like a baby. I would clean it with high quality lint-free baby wipes (literally) every time it’s back indoors. I even thought about making a video on how to clean your camera and gear but thought people already knew and doing that.

@jensgaethje8555 3 ай бұрын

Nice little intro 👍 Is it your voice narrating or AI ?

@TossSong 3 ай бұрын

Thank you for your comment. It's my voice. Interesting that you're saying so, because you're not the only one mentioning AI. Yes, I have to accentuate a bit because otherwise I would have an Asian accent.

@jensgaethje8555 3 ай бұрын

@@TossSong It's the way you raise your voice at the end of some sentences and words, and certain stops between words, where they sound a little like a computer voice reads the sentence word for word and in a whole flowing sentence. Your voice sounds very nice though ... calm and soft, great for instructional videos 👍

@TossSong 3 ай бұрын

Thank you. Oh yes, I could see that. The accentuation is key for me, but I do try to sound as conversational as I can. This is because I'm not a native English speaker. But thank you again for you kind words, really appreciate it. 🙏

@matthiasf.1577 Ай бұрын

Great review. I have a Fuji XT-20 an my trigger won't show TTL. As soon as the trigger is on the camera the camera allows only M in the settings. What am I doing wrong?

@TossSong Ай бұрын

Thank you for your comment and question. I’m not sure. Camera settings: Check your camera's flash settings. Make sure it's not set to force manual mode for external flashes. Or flash compatibility: If you're using a third-party flash, it may not support TTL with this combination of camera and trigger. Let us know.

@matthiasf.1577 Ай бұрын

@@TossSong It works with the flash directly on camera. But not with the trigger. Tried everything. No chance.

@TossSong Ай бұрын

The flash itself support TTL?

@matthiasf.1577 Ай бұрын

@@TossSongYes, the TT350 works like charm on the XT-20.

@TossSong Ай бұрын

Try more. Make sure the firmware on the trigger is updated. Double-check the camera’s settings. Sometimes, custom settings or configurations can interfere with TTL mode. Make sure that the trigger is set to TTL mode and not manual (M) mode. Check the Godox X3 manual to make sure it’s configured correctly. Drastic action, If you want, resetting the camera to factory settings can help determine if this is the issue.

@xistudio7731 2 ай бұрын

Do they have one for lumix ?

@TossSong 2 ай бұрын

Hi, thanks for reaching out. Not yet I think. I’m sure they will eventually because they recently included Fujifilm and OM System cameras. Selling well will do it.

@angelisone 3 ай бұрын

ATG Gold BluTCMR Kim X costs just a little more. Has Bluetooth, TCM, Multi pins, battery changeable.

@TossSong 3 ай бұрын

Thanks for your comment. For me, I really like the portability, touchscreen, and easy-to-see operation as well.

@ThePatrvq Ай бұрын

which usb A receiver is compatilable with this trigger?

@TossSong Ай бұрын

Hi, thanks for reaching out. The Godox X3 trigger typically uses a 2.4GHz wireless system and is designed to work with Godox's own wireless receivers. It's not typically used with USB-A receivers. If you're looking to connect the X3 trigger to a computer, you might be thinking of a different type of connection. The X3 trigger usually connects directly to a camera's hot shoe or sync port.

@ThePatrvq Ай бұрын

@@TossSong I wanted to connect it to the Vistro AR400 Lamp which dosent have receiver build in ;/

@TheSangjy 3 ай бұрын

Hey there Great video. just increase your mic gain little more. either in post or during shooting. try to keep around -9

@TossSong 3 ай бұрын

Hi: thank you for your comment and feedback. Yes, will do. The audio can definitely be increased. 👍

@carlosandreviana9448 3 ай бұрын

I don't see the v1 option in tcm nor AD200 pro. Do they exist?

@TossSong 3 ай бұрын

Hi, thanks for reaching out. Yes, you could use it with both. For the V1, select the “small flash” icon. For the AD200 Pro, select “200j”. Hope this helps.

@carlosandreviana9448 3 ай бұрын

@@TossSong thanks. I only asked because both are not an option in the manual

@TossSong 3 ай бұрын

I see, you’re right the manual is not very clear. They (Godox) could have been more thoughtful when writing up these manuals.

@carlosandreviana9448 3 ай бұрын

@@TossSong this TCM looks a bit cumbersome to use and non intuitive .I hope they simplify its use in a future firmware. Should have a dedicated button like the v1

@carlosandreviana9448 3 ай бұрын

It should be on each group instead of being a global option and with a long press picking the flash of that group

@islamsuperchannel 3 ай бұрын

This is my first time using trigger, why when I turn on my Godox x3, the screen/lens immediately turns bright as if you were using ISO 6400, is that normal? I just want the screen, exposure, speed as normal and to be able to judge how much light I will give to the photo object

@TossSong 3 ай бұрын

Hi, thanks for reaching out. If you are referring to the touchscreen, this behavior might seem unusual, but it might actually be a feature of the X3 trigger. The brightness adjustment on the screen is an important aspect of this trigger, to adapt to various shooting conditions-like indoors or outdoors. You could many adjust the screen brightness. Len me know if you’re referring to this.

@islamsuperchannel 3 ай бұрын

@@TossSong That's not what I mean, my camera screen is fine, what I mean is that it looks like a lens with a 4.5 aperture but boosted with ISO 8000-10000! 😥😥😥😥😥😥 I hope you understand what I mean, and if the Godox X3 is turned off then the lens returns with normal lighting

@islamsuperchannel 3 ай бұрын

@@TossSong my camera mode ISO is manual ISO, and I saw your video, it looks like the ISO is AUTO, can you change it to manual? If true, do you have the same problem as me?? , MANUAL or AUTO ISO then the appearance does not change sorry my english, Thank you for replying to comments

@TossSong 3 ай бұрын

I see. (But I meant the trigger touchscreens.) I accidentally have not experienced this with any of my lenses. Try to reset the trigger and see. Let me know.

@islamsuperchannel 3 ай бұрын

@@TossSong i already reset my trigger 3 time 😁, i just want to know, i saw your video , ISO auto, can you try change to manual mode? so let me not think that my product is damaged

@fredericklim5559 3 ай бұрын

Is this compatible with godox sk400ii?

@TossSong 3 ай бұрын

Hi, thanks for reaching out. Yes, it’s a Godox X system, therefore it will work.

@fredericklim5559 3 ай бұрын

@@TossSong thank you sir

@davidhead5751 4 ай бұрын

Anyone else notice that the x3 ttl conversion tcm is off by almost an entire stop?

@TossSong 4 ай бұрын

Hi, thanks for reaching out. I’ll report to you here. When I get the change I would also be testing independently (not using the TCM feature) by taking a test shot in TTL mode, noting the exposure value (EV), then switching to manual and set your camera settings to match that EV. Then adjusting the flash power in manual mode to get the right exposure. Comparing the difference between the two power settings. (Then I would compare to the TCM test to see.)

@devinwhite 3 ай бұрын

What a sexy ASMR review

@TossSong 3 ай бұрын

Thank you much for you comment. 🙏Appreciate it.

@nourhanbalian3294 3 ай бұрын

I need help 😅😢

@TossSong 3 ай бұрын

Hi, thanks for reaching out. Hope I can. Let me know.

@mimoreque1805 3 ай бұрын

Is it compatible with all Godox Speedlights and ad200 pro? Thank you!

@TossSong 3 ай бұрын

Hi, thanks for reaching out. Yes, it should be compatible with the ad200 pro for sure. And pretty much all the speedlights that have the Godox X wireless system.