Hi Idham Kassim, welcome to my channel and greatly appreciated your feedback. Your info will aid the rest, I will pin your comments and thank you again.

I think it's best to check your motherboard's fan header specs. Some motherboards dun have all the same power and amperage for all headers. Like as with my asus z790 proart all the fan headers are rated at 12w and 1.0A per header. And each fan has their own amp and wattage requirement. In my case i have 3 bequiet silent wings pro 4 120mm daisy chained to 1 cpu fan header. Each fan is rated at 0.3A and 3.6w.. so in total 3 fans will need 0.9A and 10.8w. So 3 fans will have enough power from 1 fan header. So if i were to daisy chain 4 of my bequiet fans to one header then, they won't get enough power. It's important to check the manuals and understand the power requirements of all components of the pc to avoid any mishaps. As for using a fan hub is not really recommended as all ur fans will run at the same speed as an when the temps/load increase. You can't really control or dial in the fan curves on your bios/software.

@@Prabhu_njd did you aware this ryujin 3 comes with only 1 male/female daisy chained cable integrated with PWM & ARGB? There is no separate 3 PWM and 3 argb cable coming from the 3 fans. Use PWM Fan Hub and connect one end label with PWM to PWM fan hub, then from the hub plug in direct to MOBO cpu fan header -100% work and can control the fan speed with custom curve. Yes read of all the specs amp/wattage everything but still without a hub with SATA power, the fan will not run max as shown in this video. Based on true real life experience. Thanks.

@@idhamkassim4195 Honestly speaking. If getting a hub to power up these radiator fans, it will be good. Part of the reason I do not choose Asus mid range boards is, I have no idea why most at at 1A, even on AIO_Pump. Else for the rest I've tested like ASRock or MSI, most are 2A and pump are at 3A.

Hi ganger47, welcome to my channel and thank you for your valuable feedback. Greatly appreciated it and all the best with your build 😉

Hi 許富傑, welcome to my channel. Thank you for your feedback and I greatly appreciated it. I will try in future to attend to any IT Events. Thanks again for the enouragement.

Hi marty flat4, welcome to my channel and thank you for your feedback, greatly appreciated it. All the best with your build too 😉

Hi Travis Cooper, welcome to my channel and am glad you like my content. Happy purchase and all the best with your build too 😉

Hello Unannounced Fart, welcome to my channel, it’s my pleasure, thank you for your valuable feedback and all the best with your build too 😉

hello ANBU Zero, welcome to my channel and I am glad you find this content useful. All the best with your build too. 😉

Hi Wayne Hughes, welcome back, for M-ATX case, if the aircooling clearance have a height of 170mm it should be alright but for ITX, I do not have all ITX case but base on my Lian Li Q58, the pump block will not fit. Also note, I am unsure if this AIO comes with a 240 variant to fit an ITX case.

@@KleoYan Yea, there is a 240 model. But in compatbility with each case/motherboard remains to be seen. Generally since this is an ROG AIO, it should be compatible with their ROG/ROG Strix series of motherboards, without being blocked by the VRM heatsinks.

@@doodlerdsl hi and welcome back. Thank you for your feedback 😉

Hi Nox, welcome back, yes a premium price to pay but nevertherless this is a good looking AIO and it does perform. I guess this is what you get of what you pay for. Once again, thank you for your feedback and support 😉

Hi Tuyul Nyasar, welcome back, I am in the mist at work. you mind to drop me an email godzylatech@gmail.com. copy your comment on the email, I will get back to you once I have the time. Do pardon me and thank you!

Hi Игорь Кот, welcome to my channel. you will need the Armoury Crate for your LCD. If you remove that totally. the effect you have set might not stay when you reboot the system. As for your fan's argb, you can get a remote control argb hub.

Hi Rezuan Isham, welcome to my channel and thank you for your feedback. 👍

Also which one is better at price/performence between Arctic Liquid freezer 2 360mm and Deepcool LT720 360mm?

@@FloryXL Hi, welcome to my channel. Both are relatively competitive, in the long run, I myself is using the Arctic Liquid Freezer II family, they serve to be very reliable. here are some references. check the coldplate of my Arctic Liquid Freezer II 280 kzfaq.info/get/bejne/iLtja5uf08nShY0.htmlsi=fZe7gFxLMjygaaUu and also how it's being engineered kzfaq.info/get/bejne/q82XkpmT27--cZ8.htmlsi=qp3jFyJ0xdSvzXrm . As for the Deepcool LT720. I am still testing it for long run, so far it's been operating smoothly too.

Hi Umar Yaqoob, welcome to my channel. I am not able to answer your question and you might want to check at amazon if there are any.

HI Khev VenZ, welcome to my channel and thank you for your feedback. All the best with your build too. 😉

hi Ben FR27, welcome to my channel. if you just want pure performance, I will recommend you the Arcitc Liquid Freezer II or the Deepcool LT720, both will not break your pocket and both are good in performance. as for the direction i've placed in this video, this is an open bench test. If you are placing it in the case, if you mount the liquid aio at the front, you should be drawing cool air in through the radiator and if you are placing at the top, you've no other options but to have then exhuast warm air through the radiator. That's how it's been for liquid AIO orientation in a case to have good temperature results.

@@KleoYan Thanks for the advice 👍🖖

@@benfr2744 you are most welcome and all the best with your build 😉

Hi Rei, welcome to my channel. Yea you will need both icue and Asus armoury crate if you intend to switch the radiator fans. Icue to control the Corsair fans and argb. As for the lcd on the AiO pump, you will need Asus amoury crate.

@@KleoYan thank you for this quick reply ! I think I will take it.

@@rei8228 hi and you are most welcome. All the best with your build too. 😉

Hi Big PP, welcome to my channel. If you ask me between these two, on looks Asus. On price Galahad. Performance both about the same. It greatly depends on your budget. If you ask me base on my own personal favourite. Arctic Liquid Freezer II 280. Hands down, price, looks of a spaceship and performance. You won’t need to have too fanciful or too much lightings to make your build looks elegant kzfaq.info/get/bejne/mceKmsKQ0ZecdJ8.html

Hi 박현우, welcome to my channel. for both coolers, if price is not a concern. I would go for this cooler. lesser cable mess plus this Ryujin have more advantage. The small fans which blow the heat from the VRAM, RAMS and M.2 Heatsink. easy for Ryuo, those heat accumulate.. when a board accumulate heat, there will be a stoppage in performance. PC performance not only depends on how much you can cool the CPU only.. with VRAM to run cooler, it will able to draw more ampere for the CPU to perform. same applies to the DDR5 and m.2

I believe this is an asus design much like all the aio kits coming out in the last few months as the asetek patent has ended.

@@zagan1 hello and welcome to my channel, thank you for your valuable feedback 😉

Hi JOnnie, welcome to my channel. I do not have a ryujin II to compare with but this unit has a crystal clear image. not much pixelization.

I have this aio and according to asus they increased the resolution of this ryujin iii compared to the previous version.

Hi SirSone, welcome to my channel. Sad to say, I do not own or sponsored by Corsair, therefore unable to answer your question properly but when comparing with Arctic Liquid Freezer II and Deepcool LT720. This liquid AIO does have better results.

Hi Leroy Chew, welcome to my channel. Mind if I ask which GPU did you install?

@@KleoYan Strix 4080 Super

@@LeroyC06 thanks for the info, I do encounter the similar issue you are having, but mine is of a different issue. was using an ASRock Z790 Sonic PG Wifi with a Gigabyte 4070Ti OC Aero and the temperature does not reflect the same temperature, same applies when I place a PNY 4070ti OC XLR8. However when I swap my motherboard to Asus B650M TUF Gaming Plus Wifi. Only the PNY gpu has the same temp, else my giga does not. I did send a support ticket to asus and my reply was, the Asus amoury crate does not work well with other motherboards. I suggest you to approach Asus support on this matter www.asus.com/support/Product/ContactUs/Services/questionform/?lang=en-us as I am not able to provide you with a solution. so sorry about it.

@@KleoYan ah thats unfortunate. Thank you!

@@LeroyC06 most welcome. Hope you will find a solution soon.

HI Swizzler80, welcome back, though this liquid AIO is on the premium price tag, it does perform but you are right. it's not budget friendly.

Have you seen Corsair prices....😮

@@emorrot9938 Hi welcome to my channel, not that I notice off, but I guess they are pricey.

Hi Alexandre Souza, both you've mentioned are of good performance but if you want price vs performance, that will be the Arctic Liquid Freezer II.

Hi angel narvaez, welcome to my channel. This cooler does it's job and if you have the budget to spend. In my honest opinion, this cooler is an overkill for your setup. An i5-13400 does not really run that hot.

Hi Travis Cooper, welcome back. Yup. I did a mistake and you are correct. I did mentioned about my mistake in this content. Thanks for the feedback 😊

Hi João Luiz dos Junior Santos, welcome to my channel. Do pardon me as this was the first Ryujin AIO which I have tested. I am not able to compare what's the previous version is like and I am so sorry that it disappointed you.

Hi Jeff Jefferson, welcome to my channel. Do pardon me and I am not able to answer your question as I do not have experience with Threadripper mountings or system. it will be best if you can ask your question at the Asus reddit forum. www.reddit.com/r/ASUS/

@@KleoYan cheers pal, I actually did ask on reddit, in the asus rog section though. Many thanks for the welcome and taking the time to respond 👍

@@JeffJeffers0n so sorry ya. Thank you for your visit 👍

Hi Amit Kumar , welcome to my channel and thank you for your valuable feedback. All the best with your build too.😉

Hello @BravoSixGoingDark. I have gone through the specs www.corsair.com/us/en/p/pc-cases/cc-9011030-ww/carbide-series-air-540-high-airflow-atx-cube-case-cc-9011030-ww it says able to fit 240 280 or even 360 but base on my experience, it depends on what GPU you are using. it's going to be tricky as the only position for the 360 AIO is at the front.

@@KleoYan I see.

Hello Pappilon, welcome to my channel, the one you are referring to is the non argb version. this is the ARGB version.. and I dont hear any weird noises from pump.

@@KleoYan Thank you for the answer. I just think it's better to take ASUS Rog Ryujin III 360 or Corsair iCUE H150i ELITE LCD XT 360.

maybe this will help. noctua version rog.asus.com/cooling/cpu-liquid-coolers/rog-ryujin/rog-ryujin-iii-360/ and the one you find in this content is the argb version rog.asus.com/cooling/cpu-liquid-coolers/rog-ryujin/rog-ryujin-iii-360-argb/

@@pappilon720 I see. I believe it greatly depends on the price. I am not able to tell you if Corsair is a much better liquid AIO as there are no test unit from them. So sorry, not able to help you on this.

@@KleoYan Thank you. Waiting for tests and comparisons)

Hi TheBlueStig, welcome to my channel and I wasn't aware of this as I have returned this unit. I will try to reachout to Asus, see if they can do some firmware or so to add on features as you've mentioned. Thank you for your feedback.

Hi Дарій Коцюруба, welcome to my channel, you might want to check this listing pangoly.com/en/compatibility/arctic-liquid-freezer-ii-420-rgb/case

Hello periklis liakakis, welcome to my channel. I would just say, stick to one suite ego system. the GA II LCD and this Asus Ryujin III both are build equality good. If you are using lian li uni fans, just go for the GA II LCD, as mentioned, best to just use one suite, so that you don't have to install so many programs to control the pump and fans through L-Connect 3 app.

@@KleoYan thank you very much!!

@@periklisliakakis9046 you are most welcome. all the best with choosing and on your build too. 😉

Hello Enkee, welcome to my channel. both does serve pretty well in performance. If you have the budget to this AIO, you can purchase without worries. if there is a budget constraint, Arctic Liquid Freezer II will still be a better option.

Hello Bruce lee, welcome back. thank you for your feedback and you are right about the readings. Hopefully Asus will address this.

Hi Данил, welcome to my channel, hmm. I have not tested the uploading of mpeg, only tested on jpg, still picture. I would advise you to contact Asus tech support regarding about your issues.

@@KleoYan thanks for your help

@@user-wo3um1ku5f you are most welcome, do pardon me as I do not have this unit to test it further for you as I have returned it to Asus Singapore. thanks again for the visit.

Hello @e234darjrock, welcome to my channel. It could be the usb connection. Try shut down your pc, unplug the psu cable, unplug the usb connector if your aio. Wait for 45 seconds. Plug back the usb connector, psu cable and power it on. If it still does not work. Try uninstall armoury crate with the uninstall application provided at Asus website. Then reinstall, see if it works.

@@KleoYan Thank you for your reply~ I can control the animation on the screen now~ But I can't control the speed of the three fans on the water cooling radiator. This may also be a software problem? Or maybe the cable is really wrong. ?

@@e234darkrock I would say try reconnecting the usb cable to another port of the motherboard. See if it works.

@@KleoYan I will check and try again, thanks~~

hi Wendi Wijaya, welcome to my channel, for this I am not able to answer you as this unit was returned to Asus SG, your best bet is to ask at Asus reddit forum www.reddit.com/r/ASUS/

@@KleoYan alright then, thanks for the information

@@wendiwijaya3348 you are most welcome and pardon me if not able to help you out.

hi Hakan İsik, welcome to my channel. there will be side humming noise but if it's too loud and if your liquid aio is still underwarranty, check with your seller or to submit an RMA with Asustek.

Hi Huy Vu, welcome to my channel. This Liquid AIO does its job and will be able to handle a 14900k processor. As for noise there will be when it rams all the way up to its max rpm. You can craft your own pwm fan curve to the noise profile you find comfortable. For me I will keep the profile max speed between 1500rpm to 1800 rpm. The noise between this settings are acceptable for me.

@@KleoYan I have a z790 dark hero motherboard and I checked I think it would have enough power for the fans of the cooler

@@KleoYan thank you for your recommendation!

@@HuyVu-lx1mf you are most welcome. All the best with your build too 😉

@@KleoYanalso very quick question: Do you know the resolution of the LCD screen? I could not find that spec anywhere on Asus website.

Hello BigDozer84, welcome to my channel. You might want to check asustek.com to see where you can purchase this.

Hi Hiep Nguyen, welcome to my channel, try remove the armoury crate using the Asus Armoury Crate removal tool dlcdnets.asus.com/pub/ASUS/mb/14Utilities/Armoury_Crate_Uninstall_Tool.zip?model=Armoury%20Crate , then reboot your system and re-install again.

Hi Kevin Ryder, welcome to my channel. There are no difference between push or pull configuration. Just that I prefer to pull as it's easier to clean the rad. if I do push, all dust will accumulate inside the rad. As for the logo, yes it will be nicer to have it out instead of against the rad. As mentioned is my preference to mount the fans, you can choose to have your own style.

Bro since I have this AIO my case gets dirty so fast it's all full with dust. I have the Helios strix Case, so I was thinking it's because the rads position, I have it opposite like yours maybe it's that the issue? It's blowing air inside the case. I though it should blow it out no ?

@@WarBirdx if you mount at the top. Your fans are pushing to the top and it’s though the radiator. Therefore dust is accumulated. Unless you place your fans above the radiator where is pull instead of push. That will help lessen the dust accumulation. But a lot wanted aesthetic. Therefore dust will be there. My main builds are mainly a 280 aio at the side where it pulls air in through the rad. This allows me to clean with ease.

i had the ryjuin 1 before the first one and never had this dust problems, but with the new one you showed in the video its crazy literally, and its so noisy i will try tho with pull option, well screw the asthetics its just stickers you never look at xD@@KleoYan

@@WarBirdx I see, hmm. I never like 360 from the start. I prefer 280 or 420 liquid AIOs, pushing air through rad is always noisier as compared to pulling from the radiator. Alot will tell me that I am doing the wrong way but when I compare the thermal, both are the same temp, be it push or pull. As why pushing air through a rad is noiser, an example, with how you whistle through your lips, stay at the position and suck air in, which is giving a sharper pitch? That is where I got the idea and it's proven, when I apply on liquid AIOs. (Pull method) Next will be dust, as mentioned, pushing air through rad you are inviting dust to be accumulated on your radiator, else pulling, the dust if I see it, I can just use a vaccum cleaner to clean the rad fin stacks. Now as why 280 and 420, it's simple. you pour hot water in a bowl (represent a 360 AIO) and pour hot water to a plate (represent a 280 or 420 AIO), then blow air on both, which will cool off faster? Therefore with this practical logic and putting this into action. I get better thermal results. It's still up to individual preference. Is either you want esthetic or to compromise performance. Another fact about using 280 or 420, they are of 140mm fans and you can run at lower RPM and to have good amount of air pulling off the radiators. When comes to fans and radiator placement., I always find cases which ables me to mount a 280 Liquid AIO at the side (Intake), to have my GPU mounted Vertically, leaving no blockage for the bottom fans to push cool air up and having a clear path above for the fans at the top to exhuast hot air out. Anyway this is my current build based on Sonic the Hedge Hog www.reddit.com/r/pcmasterrace/comments/19f113a/sonic_the_hedge_hog/ and this was my past build, the Gun Metal build kzfaq.info/get/bejne/mceKmsKQ0ZecdJ8.htmlsi=IWMt0jbsBiQwMPZH. Both rigs are with 280 at the side of the case (Intake)

Hello Evan, welcome to my channel. Noise is subjective to individual as performance, both this liquid aio and the 280 or 420 Liquid freezer II does perform. If you looking for Arctic LF2. take the 280 or 420 route for your 13900KS. Also you might want to set the power limit, as by default, it will run super hot on load.

Thanks for insightful content! Subbed :)

@@kazevan you are most welcome and all the best with your build too.

Hi João Pedro, welcome to my channel. I have no NZXT liquid AIO to test on, therefore can't really advise you on this. so sorry.

Does the Riyujin screen have 30hz or 60hz?

@@joaopedro4886 it's at 60Hz.

Hi Quinn Lau, welcome to my channel. Thank you for the notice, infact you are right. Sometimes is good to find info on a product that is used for a certian period. Once again thank you for your valuable feedback 👍

Hi WarBird, welcome to my channel. You can mount the way you want it. For me, I mount it this way as it’s position to draw cool air and push to sweep the warm heat from the motherboard. It’s an open bench test. Plus pull or push is of the same in an open bench test.

Hi Bruce Lee, welcome to my channel. Do pardon me for the late reply, unfortunately nope, I do not have the reverse version for review. So sorry.

@KleoYan any idea if the controller is the same with version 2 or newer? I am using the first version if the fans.

@@wankerka for the reverse fans they are using the v2 controller which has the profile. I have tried the v2 fans (non reserve) they can’t work with the v1 controllers. It has a different rpm profile.

@@KleoYan ok ty

@@wankerka you are most welcome. All the best with your build too. 😉

Hi Hackod, welcome to my channel the coldpate is copper and not nickel-plated.

@@KleoYan ty.

@@Hackod_Ru you are most welcome.

Hi Majed Abdullah, welcome to my channel. I do not have the ryujin II 360. Can’t tell you what’s the difference in temperature. But if you already have that, I don’t think you need to change to this. As the ryujin seems to have same function as this. Maybe just the lcd interface is slightly different.

@Kleo Yan the main difference in spec is that the II using gen 7 astec and III using gen 8 astec but does the new gen 8 worth it as temperature decrease

@@Majid.bo3 I see. I mean is still up to you. for me if I have the version II 360, I would not spend on this. unless you really want to. I will make use of the version II till end of time. I am sure that the temperature drops will only be a fraction. 2 to 5 degrees difference. If it's that, I will just do side tweaks. Limiting the processor Power limits on intel or using PBO2 on AMD.

@Kleo Yan ok thanks man.

@@Majid.bo3 you are most welcome. don't mind my saying those ya. Just that I feel is not a good upgrade from version II to version III.

Hi again Bruce lee, i do agree with you on the bloatware but if you know how to block it. that will not be an issue.

@@KleoYan when you say block it do you mean not to download Armory crate?

@@wankerka hi and welcome back. I am not saying not to download and install armoury crate. it's necessary to control the LCD panel of this liquid AIO. what i mean is, if you know how to filter off the bloatware services using service.msc in windows. you dont have to worry about bloatware.

Hi S_W_A_T_911, welcome to my channel. Yes it does as it supports 1700 Socket.

@@KleoYan Thank you. Great channel

@@s_w_a_t_9115 you are most welcome and thank you for your feedback 😉

Correction - the other 2 cables are not 600w. On the back of the psu, it says +12VHPWR.

@@rodnietorres3082 what's the model of your PSU?

@@KleoYan Msi mpg 1000w 80+ gold fully modular

@@rodnietorres3082 i have search that.. is it a A1000G ??

@@KleoYan yes

Hi 杜ZACK, welcome to my channel, I am testing this in an open bench, if this radiator is at the top and inside a case, will switch the other direction. But if the rad is mounted at the front of the case, the position stays.

@@KleoYan I didn't notice it, it's true, thank you for your explanation

@@zack5066 you are most welcome 😉

Hi Scott Brady, welcome to my channel. Maybe you can search at amazon.com www.amazon.com/s?k=asus+rog+ryujin+iii+360+argb&crid=55APPHWKTW0U&sprefix=Asus+Rog+Ryujin+III+360+ARGB%2Caps%2C328&ref=nb_sb_ss_ts-doa-p_1_28

Hi Paul, welcome back. When I tested this unit it's quiet.

Hi Nixohc, welcome to my channel, yes it does support 14th gen.

Hi Intez -_-, welcome to my channel. its a 3.5" LCD Panel with resolution of 480 x 480 in pixel.

Hi Maxime Lg, welcome to my channel. This liquid AIO can easily tame a 13700k or 13700KF without issues. All the best with your build too. 😉

@@KleoYan thank you very much

@@maximelg7467 you are most welcome.

Hi Music Is Life, welcome to my channel. As the pump and VRM fan are plug to the same motherboard fan header. Which is CPU_FAN, you can control the pump rpm through UEFI or Armoury Crate. just need to select to CPU_FAN, set to PWM and to create your own PWM curve.

@@KleoYan Yeah my friend in theory it supposed to work like that ,in my case nothing can change the pump RPM and it is runningso slow and temp get very high ! !

@@musicislife7512 serious. Set to dc and run full. See if that helps

Hello @rechprogamerus, welcome to my channel. Thank you for your feedback.

So the NZXT KRAKEN ELITE 360 BETTER trying to decide this one or the one u got

@@edwardbaltazar776 I would say ditch the ASUS and go for something else with the extra money you save from not buying this.

@@edwardbaltazar776 hello and welcome to my channel. It greatly depends what you wanted. For me both are ok but the style are different.

Hi THE BOBIST, welcome to my channel. Thank you for your feedback.

hi BreakaTape, welcome to my channel. Thank you for your feedback, why not feedback to Asus or at Asus reddit forum? At least they know about it and to improve on it.

@@KleoYanI will. I wish you would've mentioned that in your video. That's a major flaw. In NZXT you can control the fans in the software, with Asus you have to go to the BIOS for adjustments, extremely inconvenient.

@@BreakaTape I see, my bad as I never like to control Pump or fans via software, I prefer to use UEFI. total control.

@@KleoYan how do you have more control in UEFI than via software? I can do anything in the NZXT software. Another major flaw is the lack of hysteresis. If your cpu temp goes to f.e. 75 Celsius for 2 seconds, the fans will ramp up. With hysteresis you can set the fans to only ramp up if temp exceeds certain threshold for a set amount of time to prevent that occasional ranping.

@@BreakaTape I see. Good for you. 😉

Hi Kerem Mayer, welcome to my channel and thank you for point out. For your info, it make no difference be it push or pull configuration. I place it this way as it's easier to clean, plus dust will not accumulate inside radiator fins. However you are right if you just want asethetic.