GOING OFF-ROAD IN A STANDARD 4WD! How to AVOID breakages & getting STUCK!

Рет қаралды 213,363

Жыл бұрын

Jocko’s back in the workshop because it's finally time to add some 4WD mods to his stock N70 Hilux!
In the last build episode, Jocko went through the vehicle front to back to look at its reliability and added power to the engine (check out the first build episode here: • DREAM 4WD build on a b... )
Now it's time for the fun stuff, Jocko takes the N70 out bush for a torture test to see how far you can push a stock 4WD offroad before you start adding mods like suspension, wheels and lockers. Leave a comment about how your 4x4 builds are going and if you have any mechanical hacks and tips!
________________________
Mods/Gear List:
________________________
12v Gear: www.projecta.com.au/
Bull bar and roof rack: efs4wd.com.au/
Jocko's 4WD Lights: bigredgear.com.au/
Jocko's UHF Gear: oricom.com.au/deals/
Throttle Controllers: www.ultimate9.co/au/
Jocko & Jesse’s tools: www.kincrome.com.au/
Engine performance specialists: performancetourers.myshopify....
#4x4 #offroad #4WD247 #overlanding #projectcar #DIY #JProject22EP2

Пікірлер: 346

@MatthewDoyle81 Жыл бұрын

A great video mate, I dare say a lot of people myself included don’t have a lot of money, have an IFS ute and just want to see how far it goes without breaking something but upgrading small pieces bit by bit. A great way to connect with a lot of your viewers in very similar situations, well done.

@swampypolitics9574 Жыл бұрын

Certain breakages are just gunna happen. Carry a cv and some u joints and things like that that are not super expensive and more prone to breaking

@voyager11221 Жыл бұрын

Yes!

@4WD247 Жыл бұрын

Thanks mate, Jocko loves these kind of build and doing it on the cheap, there will be plenty more episodes like this to come!

@markuran3152 Жыл бұрын

Agree with your statements mate

@kadenmackriell4751 Жыл бұрын

@@swampypolitics9574 been wheeling a stock 2007 hilux. Never done a cv, cvs break when they are under to much pressure from mainly drivers error, whether it’s driving like an idiot or trying to drive some thing to hard for the car, or lifting the ifs to much without a diff drop.

@garycarter8332 Жыл бұрын

I think that taking a stock vehicle wheeling before upgrading is a must! Not only do you see where you need to make changes first… but also it teaches you how to pick a line on obstacles. That the reason I love this channel. Graham is right there with the highly modded rigs but with a little line picking he can go right with them!! Great channel for learning and always entertaining!!!

@4WD247 Жыл бұрын

Totally agree! Theres to many people out there with all "the gear and have no idea"

@zac2882 Жыл бұрын

@@4WD247 what are your thoughts of the 75 series

@henkstols9326 Жыл бұрын

I have been skipping some video's on this channel lately and I must say this video was super interesting. Watching the team do hard tracks weekly has not hit the spot with me lately and always find video's very interesting regarding tyres and general product or vehicle reviews,especially becasue the guys are super knowledgeable.

@tylerwilliam-lr7yw Жыл бұрын

how ytis show is the best

@madlad8629 8 ай бұрын

How do you know the other videos weren't interesting if you skipped them?

@johnnumbat9782 Жыл бұрын

Thanks Jocko - I bought my N70 Diesel Auto early Feb 2020 just before Covid for 18k (yes I know what you’re thinking) - it had low kms, spotless duco and interior with factory bullbar, ARB canopy and ARB tow bar - I’m a solo touring cyclist in Australia and discovered the practicality (water access) and common sense (security) of touring the outback with a vehicle compared to my easy 6 mth treks through Europe - this ute has been amazing as a standard ‘light” off-roader and tourer for my needs - the ARB canopy and tub have now been replaced with 1600mm canopy because unlike you I’m short in stature and had trouble reaching into the side windows and over the rear tailgate - I’ve fitted ‘truck’ spec A/T tyres, Safari snorkel and that’s all I need - a NSW/QLD chap on Gumtree made a roof console fully lined to suit this model for around $280.

@jofi7581 Жыл бұрын

Looking forward to seeing how this build turns out 👍

@Team_Pinky_Muay_Thai Жыл бұрын

Really enjoyable video for me. I have a mildly modified N70 and it's good to know I've made most of the important mods you mentioned.

@lasol2474 Жыл бұрын

You're a very good presenter. Probably the best out there in the 4wd/off-road segment. Your explanation is logical, easy to follow and even I can understand. Good job!

@kennethwatson2492 Жыл бұрын

Love this Joc! Bringing it back to basics!

@KarlEller Жыл бұрын

IMO tyres should probably be one of your first mods. Everyone is always obsessed with getting the biggest tyres possible, but most dual-cabs will fit a 31-32" tyre on stock suspension and rims, and a decent-priced AT (or even cheaper MT) will get you a LOT further than those HTs while you're building up funds for other mods.

@TheNyanCatReborn Жыл бұрын

Yup, just tyres not even wheels really. You can get yourself a lift by just putting bugger tyres on than from factory and with more grip which will let ya go further

@markhowells13 Жыл бұрын

I have just snuck mine up to 32's (ish) with a 2 inch lift. Simply because going up to 33's will be burning fuel and increasing driveline stress for the 60-70% i use it on paved roads. It just doesnt make sense, and it gets me anywhere i have tried to go

@zarkov2324 Жыл бұрын

Can even get cheap as MT/AT and throw them on some steelies. Change over when heading out. Saves fuel and they will last ages.

@4WD247 Жыл бұрын

That's true mate, but we all have to start somewhere

@johnnumbat9782 Жыл бұрын

@enricofresnoza3036 Жыл бұрын

Can’t wait to see how this build turns out! Thanks for all the pointers Jocko!

@4WD247 Жыл бұрын

You bet!

@kingoftheboss Жыл бұрын

Really enjoyable video for me.Looking forward to seeing how this build turns out

@mixdaboom95 Жыл бұрын

Great video Jocko this series is coming in handy as I have a stock n70 I'm building up my self

@tolzyt5338 Жыл бұрын

Thanks Jocko! Really helpful vid. Just bought a dmax and wasn’t sure what to do first so great pointers pal. 👍

@chillybinadventures Жыл бұрын

This is a very practical video. Good on ya Jocko 👌🏻

@gregeigsti3280 Жыл бұрын

Great video! Looking forward to future installments. This is exactly how I built my truck (yes I am in the states) - start with small items I knew would be necessary then test to learn what else would be required. Rinse and repeat... An added benefit of doing it this way is it allowed me time to budget and save and remain debt free. Thanks for the great content over the years!

@4WD247 Жыл бұрын

Right on!

@DB-yj3qc Жыл бұрын

Greg E. 👍 I'm in USA, and have followed that "line" of mods for my last 2 Jeeps. I quit " keeping up with the Jones" on lifting mods and what not. I stopped on 33-35 in. tire sizes when "who's who" was moving to 38s - 40s ect. Many local trails quit being fun, let alone more parts wearing out more often. Sticking with 33-35 tires with gear change and lockers my MPG's didn't take the hit surprisingly on XJ.

@shellebelle53 Жыл бұрын

Really good video. Certainly relatable for a lot of us 👍

@LeeSlikkers Жыл бұрын

Here in the states I'm running an 06 Lexus LX470 (IFS) and I'll be watching & taking notes as you dive into the details of a longer travel rear suspension.

@any4wd Жыл бұрын

always good to see what other people are doing to their set up's

@DiceyRicey Жыл бұрын

Nice repping the standard 4WDs out there! Ive got one and am not modding unless I do myself a mischief. Don’t do the build too fast Jocko, would love to see a few more standard off-road vids. Show just where you can get to with a basic build. Great vid as always guys! 👍

@drivefortright9662 Жыл бұрын

Like the idea of dropping parts you don't need in the dry run and replace or upgrade all that survived or scraped through 😀

@Maxyteq01 Жыл бұрын

Nice one boys

@davidmanning8329 Жыл бұрын

Took my stock Ranger off-roading. First thing I broke was side steps - 1 ripping it off in a mud puddle and 1 bashed by a rock. Rock sliders were the first mod! Mind you, it went pretty ok offroad. It was quite fun anyway!

@Uha_Nein Жыл бұрын

Hey Joko, thanks for the video. At minute 7:12, why go in the ruts? By 7:00 minutes you avoid the ruts. On the end of the video you know how to change the line. at 7:55 minutes: You dont need a suspensionlift. A lift dont make more room in the wheelarches by cross up the axles. Your limit is still the factory bumpstop on up travel. You have this new build. Try it out. Fit 33" and test where the tires rub. Install a lift and test again. For your IFS is a lift a lift, you get more groundclearens.

@TheBabyhummer Жыл бұрын

Great video keep it going it helps a lot thx

@bangran1 Жыл бұрын

OUTSTANDING guys!!!!!

@felixambuk Жыл бұрын

Amazing mods✌💪

@chriswalker499 Жыл бұрын

Watch the Weight of side steps. One thing I found with my N70 is a full length slide in the tub has made camping so much easier. I picked up a set of 1500mm runners on special order from Bunnings an I built as a split draw system with a ute sized draw. The second battery goes behind the draw. Also measure how high where you keep your car as well as your place of works parking. No point in driving a to work and not be able to park in the works under cover parking.

@stuartpowell5473 Жыл бұрын

Hey Jock love the concept of the build as its what i have done to my Paj. Think you got it wrong with the radio mike mount however. One of the reasons you get that style is because the controls and channel/volume screen info is on the hand piece. When touring you are often switching between channels and or turning the volume up and down (there are some conversations you your partner or kids just don't need to hear) . it is good to be able to see the info on the screen easily and be able to adjust things with the mike on the mount. I have mine high up on the dash just to the side of the left driver vent. I can scan down from the road and up easily to see the screen and can operate the controls without leaning forward in my seat or having to pick up the handset. Give it a go and see.

@showbags7 Жыл бұрын

Thanks Jocko awesome vid, very helpful

@thomasburr119 Жыл бұрын

Really keen to see a follow up vid after the mods are made. Would love to see the exact same track tackled as a comparison. Love it 🤙

@stefanwest312 Жыл бұрын

My wife and I have done an awful lot in a standard 2003 Hilux with Cooper AT3 tryes. The Snowys, the Simpson and lots of other non-"name places". There are so often alternative routes near an obstacle that suit stock cars. Best "mod" - have a playground with a ton of different lines and different sorts of obstacles and spend time going from easy to hard and improve your technique and car control. Practice doesn't need to be a chore!

@harrisonmoore5726 Жыл бұрын

Cant wait to see this built and on its first trip with the rest of the crew 😎👍🏼

@4WD247 Жыл бұрын

Us too! Where should it's first trip be??

@harrisonmoore5726 Жыл бұрын

@@4WD247 Fraser for sure 🏝

@robinrobertier6363 Жыл бұрын

Not bad the n70 up 5 ways ahahah ballsy! Go Jocko !!

@darrellcoy Жыл бұрын

Looking forward to the coming episodes.

@alisonphilp7497 Жыл бұрын

So I’ve got the same stock hylux I added a 100 ltr fridge made a cage for it out of an old screen door light and works epic have 1 titan draw 12 volt system peddler 2 inch lift and constant 300 in the rear. And a snorkel a/t tyres on original rims no bar work yet although there is literally thousands I want to spend to get it where I’m happy. I’d love a rear locker also and a full canopy set up. But it’s just a lot of money Love ur work jocko

@overunder_4x4 Жыл бұрын

Great video! This build should be a lot of fun. New sliders immediately. Factory steps crumpled in 2 minutes. 🤣

@yamumatittys Жыл бұрын

That’s great content Jocko

@jasonh4167 Жыл бұрын

right on Jocko 1st thing a winch👍

@bradalexander63 Жыл бұрын

Shorter wheelbase? Always fun to watch... Thumbs up!

@mattkathforth2300 Жыл бұрын

Hi Jock, loving this series I bought as near duplicate N70 in Jan 2023 . Just put a winch on and heading to Fraser next week with my wife and camper trailer.for a week. Loved the previous engine mods hope to have those done in 2nd 1/4 of this year. Also up graded to EC Offroad head unit great to have apps at fingertips. Look forward to future instalments.

@4WD247 Жыл бұрын

Sounds great mate, have fun! 🍻

@endless4x4 Жыл бұрын

Drove my N70 up Billy Goats and Blue Rag with it stock. Only mods were snorkel and All Terrains. Mind u I do prefer the 2” and bullbar with winch and sliders I have now. Lol enjoyed the vid Jock. 👍🏻

@trailstories_srb Жыл бұрын

Jocko is excelent narrator!

@a3electronics157 Жыл бұрын

Nice Content

@barragu7189 Жыл бұрын

Nice video of the wattagans. Did those tracks with my unimog recently on my way back to Melbourne from fraser island.

@bogged2theeyeballs695 Жыл бұрын

Nice video Jock. Mates with these have fitted RG Colorado leafs on the rear ( couple of hundred bucks on Marketplace ) and fitted extended shackles, shocks and brake lines for some impressive rear articulation. Pity you pushed it a little too far on that trip. Nice dent to the RHS sill. 😁👍

@4WD247 Жыл бұрын

Cheers mate, she had to get damaged one day 😆

@tylerwilliam-lr7yw Жыл бұрын

i just like what they do and the cars they drive and the the tracks i’m only new to this though(saturday new) and it’s all i watch now

@shaneporter4554 Жыл бұрын

Great vid mate keep us up to date get lockers first

@craigquann Жыл бұрын

IFS is great. Once they're lifted on larger tires, the lack of front pumpkin and smooth skid plates really lets them slide over obstacles.

@1SweetPete Жыл бұрын

Pretty much exactly the same setup as my mate's '17 ranger we took into Cobaw😅we learned a lot that day

@CB-hr6zs Жыл бұрын

Well done jocko

@craigquann Жыл бұрын

Good call on that big rock step. Save it for Graham's Dmax....🤣

@stevenlippis5488 Жыл бұрын

I'll be curious to see how you handle touring storage with daily driver space. We don't have the luxury of multiple 4wds, so the one vehicle has to be a daily driver and also accommodate us on trips. I'm considering putting in some tie down rails rather than drawers. Keep all the room in the back, and then store everything in canvas bags we can just strap or net down. But also have a 90 series, so a lot less room than a ute.

@philthy70 Жыл бұрын

Jocko luv this ep, not everyone has the ducks guts set up and experience, be good having an ep every now and then on tips and tricks for some of us new players in the game. Cheers

@4WD247 Жыл бұрын

Glad you liked it mate, theres pleny more where that came from!

@johnhannonHanno Жыл бұрын

As usual Jocko, best tutorial.

@4WD247 Жыл бұрын

Thanks mate!

@jamezxh Жыл бұрын

Meh. He’s a fanboy.

@luked237 Жыл бұрын

Yup second that

@94Elantra Жыл бұрын

Jocko mate, if you can please make note of items such as ground clearance, approach, breakover and departure angles prior to modifying it. Would be interesting to see a comparison of before and after. Cheers!

@4WD247 Жыл бұрын

Jocko will be doing something similar in the next ep

@94Elantra Жыл бұрын

@@4WD247 Awesome. I look forward to it!

@martinravina6934 Жыл бұрын

Ideally before the bullbar was installed since ithas already taken a bit of clearance on the stock suspension

@markbergman2342 Жыл бұрын

cool almost my mods. Started with bumper (rhine evolution) front and rocksliders (handmade from poland). Next was winch bashplate (frontrunner, had to modify cause of bad fit) and in thereafter a 2" lift (OME rear and kings front with 4 ToughDoug dampeners. 350+ kg set). Recently i've chosen slightly bigger tyres 32.2" on steelies (Dotz Dakar 7j et20 r17, Cooper st maxx 275/70R17) and chucked in a plate for gearbox. Here in europe it gets me anywhere, it is my daily.

@Jimmy_Saf Жыл бұрын

Bullbar, tyres, winch, suspension, roof platform, 12v setup, front mount, snorkel, UHF, tune, etc etc. not cheap

@leonbennett3190 Жыл бұрын

Nice rig

@phil6506 Жыл бұрын

The type of wheeling you guys do I would recommend a really good first aid kit

@stephen_1987 Жыл бұрын

How much did putting that Bullbar (and winch) on the front decrease the clearance on stock springs? Somehow I doubt it would have helped.

@JakeSmithConstructionLTD Жыл бұрын

As a someone who will be looking at a similar hilux soon to use for work, play & touring I’d love to see an in-depth tray back conversion (live in the UK where traybacks are near non-existent, but my time in Aus on the farms I fell in love with them) I will be looking to do a tray back conversion and have a canopy for all my tools that is easily jacked off at the job site so I have the tray free

@westie4ageturbo.749 Жыл бұрын

See its yours If its a work car or a rental you would be amazed how far it goes! Seriously i use mine spec current hilux lifted oversized muddies with dif lock every work day and some times have to absolutely send it!

@isaacpaul8365 Жыл бұрын

Man I can already see a build like the pony looming up,watch these space.

@joeop5104 Жыл бұрын

Great vid champ great to see the difference of a stock vehicle doing 4wding compared to your pony let's say

@stockrok_3202 Жыл бұрын

We’ve got an amarok with 32” all terrains, it’s centre and rear locked stock and it is so capable, really underrated

@2uzfe4x43 Жыл бұрын

this is my dream rig! send it my way to the USA and ill test it out!

@KaffiRawr 3 ай бұрын

Body lift. It's one of the cheapest mods I did to fit bigger tires. I rarely hear it mentioned. Is it an aussie thing to not do it? The 2" body lift made all kinds of wonders for me. Bigger tires fits now. I could move my intercooler 2" up away from the hot engine with homemade spacer. The hot exhaust sits further away from the cab floor. Wrenching on the car is easier with less tight spaces. Inspecting the frame is easier when you can see and reach the top of it. Sills sit higher off the ground and frame with more clearance for sliders. No suspension geometry altered. I did it on a Nissan D22. I lifted it 2" for about $250. I would do it again.

@stefano_nmd Жыл бұрын

Bashplates are needed Jocko, for damn sure

@MntlMajorkozmo Жыл бұрын

Hey Jocko, you have the pony and the other luxxy for tough tracks. Build a pure tourer. Would like to see how a younger person builds a tourer. In a tourer, as i am planning on building a touring rig, multiple small water containers is better than one large one. Can move the weight around the chassis making the weight more even, and if one container gets contaminated, you still have other water sources. Plan ahead. What are your vision requirements around the car? What items do you want access less regularly, but easily after getting out of the car? What side will you most put towards your campsite and what will you want access to easily at camp? For me itll be the right side (drivers). So food and shelter will be that side. The offside would be recovery and power.

@shaunepegrum Жыл бұрын

That was a really great video Jocko on how a factory 4wd copes with the everyday 4wding. I think I’m heading in the right direction with mine. I seen u once at a 4wd place in Cairns ( I think was off the wall 4wd Center ) and u we’re checking out my truck. I just wish I had jumped out and said gday to u and shook ya hand. Nice video brother 🤙😎

@4WD247 Жыл бұрын

Cheers mate! Ahhh you should have!

@shaunepegrum Жыл бұрын

@@4WD247 I was sitting in the driveway at the time and u we’re leaning up against the wall and tbh I really didn’t know if it was really u or not and it wasn’t til after I had left that it dawned on me that it had to of been u. Then just around the corner I seen Sam in the spare box truck. I kick myself that I never got out and said gday mate 🤙😎

@kerryparfitt932 11 ай бұрын

I took my stock 2002 hilux sr5 2.7 petrol from Brisbane to cape York Tele track and Frenchman’s last year 2022, and it didn’t miss a beat, the only time I needed help was the soft bottom of cannibal creek. 330,000 plus klms on the clock.

@glenmccarthy7913 Жыл бұрын

Hi, Great video, I was wondering if you are going to do a diff drop as part of suspension upgrade and if so 1 inch or 2 inch and if so why or if not why ? Can you explain the different types available of the leaf springs available, and if you are going to change the front upper control arms and why you would do that on the next video

@samyeomans6710 Жыл бұрын

It has a nice exhaust note.

@shaynerodrigues720 Жыл бұрын

Great info video! Question I have though.. when will we see Shaun's 200 series again?

@TheDackesBadBoy Жыл бұрын

Keep the anti-roll bar in the rear, helps the front to really "flex" on an ifs 👍👍

@tareskisloki8579 Жыл бұрын

There's a small company called Tooheys Engineering that makes inserts for those storage pockets on the dash to allow the mounting of a UHF mic. You said in the video that the only way to fit bigger tyres is to fit a supsension lift, but that isn't true on an IFS, whatever you can fit on a four inch lift will also fit on stock suspension because the arms move through the same arc of travel. You're much better off keeping the lift to the bare minimum, and fitting 32's for a daily driver (33's work as well, but require more clearance work, and for your style of driving would require a change of diff ratios to maintain good gearing for off road). you would require upgraded shocks to control the bigger tyres though.

@paulsmit8147 Жыл бұрын

With the lack of finances, the best i could do on my Isuzu frontier was new engine and gearbox mountings, new cab rubbers (between body and chassis), and bigger rims and tyre. Thinking this will make for a better ride, this only showed me that my suspension is shot 😂 Oh well.......... Looking forward to the end result on your van 🤙🕶

@bennocooper7787 Жыл бұрын

I got n70 all I have is 32s with twin lockers an witch 2 inch lift goes really well

@luked237 Жыл бұрын

Nice one 😂

@jasondaley6723 Жыл бұрын

Well done Jocko another informative ep, you and Jessie are much more personable than the boys Graham and Sean however they are the clowns of the crew keep up the good work 👏

@chrissmith9854 Жыл бұрын

Was there when filming.. the watagans is a mad place to wheel.. that rock step up is no joke.. I went around it also. Wanna see it go up the hard lines at 5ways when it’s done.. that’s comp truck shit

@astrixistheman Жыл бұрын

Not even gonna lie. I have no money for anything, barely scraped up enough for a hand held uhf set and recover rope. But despite been stock as a rock, road tires included my triton is remarkably capable in most basic offroad areas. Not gotten stuck yet and id probably put that down to judgment but still slot of fun and gives me ideas for whats next. 😊

@tee7snow401 Жыл бұрын

Love how the number plate is EBY just short of the word ebay hahaha

@gonsungar9420 Жыл бұрын

Thanks buddy, I've been thinking what mod i can do with my stock ute and i"m thinking to invest on rock slider because i'm always bend my sidesteps and I'm kinda afraid to lift my car thinking of being unable to use shopping mall basement park which is have 2.3 meter limit height or you gonna risk your roof being scrapped on the ceiling.

@brandongoberdhan6335 Жыл бұрын

Now I gonna modify my stock rig thanks guys

@Tom-lf8hx Жыл бұрын

Owning a 2005 N70 1KD hilux, but with a steel tray, the first mods i did where phatbars bashplates and transmission bashplate 6years later never busted a CV its unlocked so i have done a few sendy bois getting up some good narly hills, drive the right way and some common sense and it will treat you very well (but at the end of the day its a touring 4wd not a rockcrawler ahah)

@lostforfun5328 Жыл бұрын

Maybe steel rims, if wheel is deformed, just use hammer or a rock and u can keep driving. And aluminum rims usualy cracks, and needs profesional welding. Thank you guys for awesome conent, i watch and enjoy every single video. 😉

@matthewremington-ei3ss Жыл бұрын

Wow stocker did pretty good. Creek road, Wishing well, 5 ways are not really stock vehicle tracks anymore !

@veliksami Жыл бұрын

A lot of "reckoning" 😂

@Norskenxtreme Жыл бұрын

He's got a ute and throws the muddy flap in the cab 😂

@DXingTV Жыл бұрын

I did the Maytown Track in a Nav D40 with a bull bar, winch and ATs, no suspension lift, no lockers, no sliders. Crazy, possibly, but no damage. That included going up to the ‘pub’ location above THAT rock step. It is possible to get a reasonably standard dual cab through some tough tracks, but it is hard work with big risks.

@4WD247 Жыл бұрын

Yeww! That's epic mate, proves you don't need much to get out there 👌A lift and lockers can take you much further though😎

@DXingTV Жыл бұрын

@@4WD247 had the lift done now, still considering the lockers.

@patrickstaples7314 Жыл бұрын

If ya only got the $ for 1 locker would you go front or rear?

@johnjackman7622 Жыл бұрын

How to avoid breakages, am I on the right channel 😂

@danbulowski7013 Жыл бұрын

Thanks

@rayray-zf4fj Жыл бұрын

Question... I know they say it's recommended when fitting a bullbar you need a suspension upgrade. but is it absolutely necessary to do it.. I want a bullbar on my ranger and can get it now but can't afford a suspension upgrade.. so I need to know what will happen if I get the bullbar with no suspension upgrade?

@zac.sciola6386 Жыл бұрын

I recently got a 08 n70 with a little bit done to it I would think a transmission cooler would be a good buy , as I’ve overheated mine a few times even with a service my auto didn’t like a long day on the tracks

@Gg-ve6qc Жыл бұрын

Good video. Noticed a few of the tracks like creek road and 5ways. Anyone know what the other tracks was

@phlfly10 Жыл бұрын

what is a typical clearance from pumpkin to the ground, that is good ?

@phil6506 Жыл бұрын

I have been a mechanic for over 50 years and I have never herd of a diff centre being called a pumpkin before😅 from now on that's what I will call it.

@patrickgrimaldi5790 Жыл бұрын

really thats quite a common term

@JamesSmullins Жыл бұрын

Here in the states that's pretty much all I've heard it called.

@jasonh4167 Жыл бұрын

50 years how old are you mate?

@phil6506 Жыл бұрын

@@jasonh4167 68, born 1954

@phil6506 Жыл бұрын

@@JamesSmullins You tube is having an influence on young Aussies , they pick up the lingo , trends come and go.