There is almost nothing better than eating dinner and watching Memphis‘ videos💪🏻

I'd prefer to see a video on restoring the wheels in a “cheap“ way with rattle cans, since I don't own a spray gun, air compressor or any of the equipment. I would love to see tips and tricks on restoring wheels in that way, since I'd like to tackle such job myself one day. :) Whichever method you'll choose, I'll watch the video. :)

6:43 ah classic belgian roads. Damn the look on your face was like ow sh*t something is about to break.

finally more golf, its a beauty

For some reason when I watch your videos I get an 80s vibe, free time travel.

Thank you for actually putting effort in the quality of your videos!

Enjoy these always, keep up the good work!

Hey Memphis, tuning in from Australia. Hard to find MK1 Golfs here so its good see one be modified on KZfaq. Cheers man keep up the good videos. :)

Glad to hear that the struts actually works, so now i will do this on my Golf Cabrio -89 who flex like an Brasilian carneval 🤘🏽 Thanks! Greatings from Sthlm Sweden.

My first car I bought directly after getting my license is a 1985 VW Passat B2 Hatchback. Glad to hear you have owned yours for 8years. Looking forward to own mine for another 7 years. March marks 1 year.

Love this sir. Keep it up. Great job with the info, video and install.👍🏾@memphis

Well done mate, i love your work

Another great video fair play keep up the good work!

Nice work, greetings from Germany🇩🇪

Regards from Brazil man! Nice work with the mk1!

Finally! Bro respect from Serbia❤ 3:50 yes do that

That's so cool and learning, now i started my dream came true like you.

Great video, Memphis. Nice to see the strut tower braces make a difference. I was already thinking of that for the old Volvo. Seeing this, that will be happening along with other chassis upgrades once the body is restored to as new. 617,000 kilometers and 32 Ontario, Canada winters have taken a toll. Still, nice to see videos like this that inspire.

Great Video, I love the way your Golf looks now. And the mic in the engine bay was a superb idea! I think with the current look, some auxilary Lamps on the front would really set your MK1 off. Cheers from Luxembourg:)

good job boi ❤️ greetings from Slovenia 🇸🇮

Amazing car , greetings from Florida 🤘🏽

Beautiful!

Awesome video mate! had the same noise with my mk2 after changing water pump and CAM BELT :)

il n'y a pas à dire, mais la golf 1 et 2 restent et resterons les plus belles de toutes

I am so happy I found your channel

Again a nice video ! Keep it up!!

Any method you’ll choose will be good! Nice work. Greetings from Croatia. 🇭🇷

Good video - I learned something today. My Mk1 Jetta made the exact same engine noise as yours. Now I know it's an overly-tight timing belt. I'll be sure to adjust it next time I take it out. Thanks Memphis!

Nice work, greetings from Portugal

Nice mods, dude! Like your videos about that oldschool Golf, kinda reminds me about good days, when i was driving mk2 Jetta. Love old cars, it is good to see them in a nice shape after all the years on a road. Oh, by the way, greetings from Ukraine!)

Yay, a mk1 episode 👍

Good stuff man! Shame about the old wheels but loving the current ones and that lip too!

Well done brother! Greetings from Belarus!)

Ur videos are my favourite thing to watch on the internet. I wanna see more of that mk1 Jetta tho! P.s: I think cheap restoration would me more interesting but if it will leave a noticeable difference in finish then maybe the pro way is the way to go 🤷‍♂️

Beautiful :)

Super video! En de gti lip mooi zo laten 👍🏻

Très belle golf mk1 Félicitations 👍👍👍👍

Nice rims Stino! Huzze-95 approves!

That is one beautiful car

Nice ride

Oh yeah I do love these videos

dikke video man! En dat geluid van de mic onder de kap is echt zalig :p

GORGEOUS! Cheap way or spray gun way, they should look mint!

good job bro

Happy to see you

Great video

those mesh wheels would look awesome with plastic nut covers and centers from the OEM 85' steelies, keep it up man.

Toffe video 💪🏽💪🏽

Awesome mk1. I highly recommend getting the lower "k" style chassis brace for any mk1 (if you don't have one yet). It makes the biggest difference IMO. Even more than the top brace.

Do a properly restoration please!!! Greetings from Argentina 🇦🇷👋 Amazing videos!!

i love this video, wil al van kind af een volkswagen golfje en wordt volgend jaar 17 toch hoop ik om een zoals die van jou te kunnen hebben (ik , leuk kleur, wielen zijn cool, overal vind hem echt perfect) !!!

I can not wait to see another episode of your BMW restoration.

I'm watching this for inspiration on my new Cabriolet

Knap werk ! Ik denk met heimwee terug aan mijn golf GTI (1.6 1981). Mijn velgen-banden (195 breed) combinatie waren ook 1 à 1,5 cm te breed en raakten bij doorveren de carosserie, en dan Bilstein schokdempers laten plaatsen. De wegligging was dan fenomenaal!

Dude, those rims might be a bit rough, but they are f**king awesome!

those wide steelies actually look really good im surprised

hey Memphis, love watching your videos. With regards to the wheels, please don't do it cheaply for our sake, YOU have the tools and skills available to make your car the best it can be for you, so I vote a proper sprayjob/restoration for the wheels with the spray gun and compressor. Do it right, do it once. Trying to remove spraypaint off a wheel later on will be a pain in the ass, I've had to do it a few times, and honestly just wished the previous owners left them in whatever state they were, best of luck, and keep up the good work.

Loved it

Hoi Memphis, ik heb eigenlijk geen voorkeur betreffende het bewerken van de velgen. Wat ik wel zou doen is alle velgen op dezelfde manier behandelen. Zie in ieder geval weer uit naar het vervolg!! Succes!

very nice car ;)

Nice video!! Zelf heb ik een mk2, tijdelijk is de motor even stuk, en heb ik niet veel tijd om hem te repareren met mijn studies enz... Trouwens, ben ook erg benieuwd wat je gaat doen om er iets wat meer power uit te krijgen, mijn 1.3 maakt 55 ponytjes, maar zou er toch ook wat meer uit willen krijgen

Like the mark I, if you are going to take it on the track you might consider fitting a larger radiator, if memory serves the GTI radiator will offer the required cooling. If that is still not sufficient then you can add an oil cooler. I like the channel, keep it up.

Beautiful job on your mk1, loved the video. Such a shame that Belgium has such strict regulations for adaptations on cars/oldtimers...

if u can find wheel caps with bbs logo it looks great. nice cars nice channel (Y)

Finally ❗️

Noice greetings from Brazil

Hand spray would make for a better finish. But it's all about the prep work.. Enjoying your videos young man...👍😀

Nice Golf

You should look into a four point lower strut brace. Should do wonders for handling and rigidity

leuke video man !

Nice car bro

Vanwaar zijde gij just? Ik zag daarjuist da ge van Baal naar Werchter reed in uwe video. :-P Toffe video's!

Very nice my dad has one but the GTI version

Great video as always Memphis! , BWA = Benzoni Wheels Accessories (Milano, Italy), you can check ebay.it for some center caps.As the wheels do have some curb rash you can easily remove it with a file if you can jack up the front of your car you can make this very neatly like it was mounted in a lathe.Good luck!!!

Anyone else cry when they seen him pull the drill out and use it on that beautiful car?

Zalige video en wat is het toch een prachtige wagen.

What a beautiful Mk1 Golf. Fantastic condition: I wouldn't want to be drilling into the bodywork to fit the rear strut brace & risk encouraging rust.

Thats sweet

Hello mate, nice to see you back. One more advice, you cab fit bigger radiator for engine cooling from mk1 or mk2. You changed engine but radiator is still shitty one from 1.5 engine.

Hot! And the car is too!

the pro way!

Wow your laws are really stupidly strict over there!! 🙈 I can understand the concerns of inexperienced and or unqualified people carry out some of the mods not allowed, but a lot of them add more safety to the vehicle. Awesome content young man. Keep it up!!👍🏻

Love your page. I am building a Golf MK1 Cabriolet. Can you please tell me where you bought the thin molding that replaced the OEM on the doors and fenders? Thanks in advance

Great video one more time! In Spain happen’s the same with the modifications, it’s a big shit! Sorry but i prefair the wide steelies wheels. Congratulations!

Your accent sounds like Jean Claude Van Damme lol guess bcoz he's also from Belgium...Nice content Memphis...

my dream car!

Litterally sat down here and wondered when ur going to post a new video

Great work Memphis altho I'm sorry that you live in a Police State 🙁 Those new wheels are superb - are they from a VW Corrado do you know? You might find the centre caps at the Essen show with a bit of luck. Keep up the good work!

Aaah belgium cops, i know the feeling. You wanna go for a cruise in the summer? Got a golf myself too.

cool video, greetings from Russia

Hey mate, I came accross your channel and so far I am loving it. Despite English is not your first language, and either is mine, I can fully understand you and your content is definitely genuine and hilarious, KZfaq needs more car enthusiast like you. I may have the possibility to live in Germany, I am aware you are in Belgium, but I was curious to ask how much should I expect to pay for a Mk1 or Mk2 Golf with TUV and registration, considering that it drives but there may be some mechanical things to fix. I have looked on Mobile.de, Autoscout24 and Marketplace but I am a little bit lost in pricings. Now I am currently living in New Zealand, but Germany has always been a dream for me, and what better car to enjoy throughout Europe doing road trips than a Golf, I used to have a Mk3 1.8 GL that I still miss. Thanks in advance and sorry for asking so much. Keep up the content and stay true to yourself! Cheers!

Greetings from Sankt Vith

The real painting is with the spray gun ;)

Zit er toch ergens een kern van waarheid in de grapjes die wij als "buren ten noorden" van jullie maken over de wegen in België. ( 6:46) Maar zonder grapjes, mooie content en geeft inspiratie om ook wat aan m'n oude clio (2001) te doen.

you should come to BG bro , we have 12tons of old cars entusiaststststt. ( part of that is that we cannot afford new ones lel)

do a performance cam would love to see a video on that

BWA are a subsidiary company to BBS, so they are a good buy at €150 👍🏻👏🏻

Man can't believe how strict they are out there!

Holy fucking shiiiit mate she sounds amazing!! That carburator sound it lovely! I'm also Belgian and I really want to have the same kind of sound because it's just music to my ears, I have already a Abarth exhaust but the engine itself doesn't sound that great Does your engine is full stock? You've changed the carburetor? I've seen that you got another air filter, does it change the sounds a lot?

When you buy rims or tyres check romanian market... is full of rims of all types and sizes :)) Just found your channel ✌