GOLF R ROOF WING/SPOILER INSTALL. GOLF R NOT-CARBON FIBER ROOF SPOILER INSTALL.

No video

GOLF R ROOF WING/SPOILER INSTALL. GOLF R NOT-CARBON FIBER ROOF SPOILER INSTALL.

Рет қаралды 29,076

Күн бұрын

The RIGHT, and the WRONG way to install a "CARBON FIBER STYLE" roof spoiler overlay for GOLF R. Will it look Good? Or will it look totally obvious and terrible? YOU DECIDE!!

Пікірлер: 33

@Remedey49 3 жыл бұрын

Thank you for the tip with the black vinyl to fill in that gap!!! I was worried I was gonna have to return it. I'm about to install this when it arrives in the mail.

@midnightmodgarage7740 3 жыл бұрын

The thing actually looked really GREAT when it was done!!! HAVE FUN WITH IT, and good luck!

@alireza071 6 күн бұрын

Can u spray the carbon fiber look with clear lacquer for better protection or it don't need?

@why4818 3 жыл бұрын

The reaction when it just pulled off first time hahaha

@samuelgiovanniibarragarcia839 2 жыл бұрын

Good job guys!

@krismunoz9057 3 жыл бұрын

where did you order this from?

@crazyd1377 3 жыл бұрын

What's good its danny from R&L Muffler i have a question, what down pipe is the best for a 18 gti ?

@yasminekhalil4608 2 жыл бұрын

what was that black thing he put at the end of the spoiler

@alexxxx2413 3 жыл бұрын

Vell done order myne waithing next week will do same , epoxy

@keitharez1809 2 жыл бұрын

How did it turn out?

@thenewkidontheblok Жыл бұрын

Yeah

@Jecica323 4 жыл бұрын

🔥🔥🔥

@hx144668 3 жыл бұрын

Do you think this spoiler would fit to 2020 Golf GTI MK7.5 performance ?

@keitharez1809 2 жыл бұрын

Yes definitely buy it off ebay

@Philip-0711 Жыл бұрын

You can order this spoiler at Oettinger or Oettinger partners in some countries. All other roof spoilers with out the badge ( Oettinger Einleger) are chinese copies.

@vclue846 4 жыл бұрын

U think u would be able to take it off one day without any damage to the oem spoiler?

@midnightmodgarage7740 4 жыл бұрын

If we used the 3M tape only, that would be possible. Even easy. The likelihood of it coming off at speed or in traffic becomes way too likely of a possibility though. Which is why we found it much more vital for it to be a very permanent install for safety reasons. To answer your question, and in all honesty, it would be close to impossible to remove the spoiler the way we went about the install and leave no damage or marks on the stock roof spoiler. A common drawback to car modification I'm afraid. One plus is that the plastic spoiler we adhered too is only about $100 from VW, plus a paint job ($50)

@joshcosta423 3 жыл бұрын

@@midnightmodgarage7740 could have just used adhesion promoter on the paint instead of the glue...

@midnightmodgarage7740 2 жыл бұрын

@@joshcosta423 in hindsight, you are right. That would have worked as well.

@homeaudiosecuritydesign.7729 2 жыл бұрын

Don’t ever use JB weld it’s a mess I ruined my wing because of this video and had to order a new wing .. it’s messy .. bad idea .

@ryzer_5074 3 жыл бұрын

is that silicon that you apply on the spoiler

@midnightmodgarage7740 2 жыл бұрын

Jb weld

@tommyzegers 2 жыл бұрын

Where did you get the wing?

@midnightmodgarage7740 2 жыл бұрын

We found it on eBay. The price for the same wing now is about $100 more than it was when we shot that video.

@Philip-0711 Жыл бұрын

@@midnightmodgarage7740 please make a video on KZfaq the difference between an original Oettinger and a cheap copy 😉

@paddeemusio 4 жыл бұрын

Do you think this spoiler would fit a mk5 GTi?

@midnightmodgarage7740 4 жыл бұрын

Unfortunately not, its slightly too wide, though there are a number of mk5 spoilers out there to choose from. Good luck and let us know what you end up going with.

@paddeemusio 4 жыл бұрын

Sadly none as good as this though I could probably do the same with that spoiler as I did with my MG spoiler

@midnightmodgarage7740 4 жыл бұрын

From what I've been able to gather on-line, the difference in width is only about a mm or so. So its possible that it could be made to fit, just ensure whoever you buy it from allows returns if not.

@paddeemusio 4 жыл бұрын

Thanks if it doesn’t fit I’ll make it fit

@NoReverse77 2 жыл бұрын

Why didn’t you just use double sided tape?

@midnightmodgarage7740 2 жыл бұрын

Of course that was an option. Unless the fitment was absolutely perfect, which is very rare in the aftermarket, the idea of something of this size flying off at highway speed with someone behind me...We just didn't want the risk. (Doublesided will not hold at speeds over 95mph, we experienced this the hard way.....)