Googan Baits MELTDOWN: Remelting Googan Baits and Pouring New Soft Plastic Lures

Рет қаралды 194,395

4 жыл бұрын

Affiliate link for AWESOME Pigments:
www.dipyourcar.com?ref=774
Welcome to the World's Worst Fishing! We are a fishing-centered TV program that does its best to bring you great fishing content & soft plastic bait making tutorials! We hope to provide our viewers with content that is fun, creative, informative and most of all entertaining. Sit back and watch us bring you the world's worst fishing!
We make fishing lures and soft plastic baits. You will find lure making tips and techniques as well as mold making tutorials and color ideas for your lure making
Warning: Making Soft Plastic lures can involve high temperature liquid plastic under pressure and is inherently dangerous if spilled or mishandled. Proceed making lures at your own risk.
Visit us on Facebook & Instagram!!
LIKE & SUBSCRIBE
#googansquad #luremaking #googanbaits

Пікірлер: 777

@WorldsWorstFishing 4 жыл бұрын

Thank you for watching, which remelts were your favorite???

@andrewheath5487 4 жыл бұрын

All of them :)

@WorldsWorstFishing 4 жыл бұрын

thanks!!

@stylooniichan5306 4 жыл бұрын

Punch bugs

@pimpshack81 4 жыл бұрын

Punch bugs for sure

@WaffleFishing 4 жыл бұрын

Hell yea

@jimjohnson4312 2 жыл бұрын

*Altogether a well made lure **enjoyable.fishing** recommend it’s the skirt seems to stay on well and the whole thing is bigger than I thought it would be. The 2 metal have a nice plating on them as well.*

@dineshsaur660 9 ай бұрын

Replacement arrived!By the way, I did forget to mention that the original lure did have a decent strike however as most anglers will attest you can get a hit kzfaq.infoUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 and fish will hang on and release lure. I used the replacement lure yesterday and ran thru a Shimano Waxwing, Kastmaster, Bobber (set to sink). I found the does run deep (I casting on the flats 3.5'). Make sure you adjust your rate of retrieve and rod tip angle (up) to prevent getting snagged on bottom. Used it a couple of times and action was very lifelike (looked like local bait fish for trevally), craftsmanship very good....however eyeball fell out. I asked for replacement and it is on it's way! It was very easy to change out treble to single inline hook.

@kboutdoorspnw3147 4 жыл бұрын

Considering how long it takes me to get my googan baits, my heart sank when the scissors came out 😂

@WorldsWorstFishing 4 жыл бұрын

my bad

@derricksnyder6535 3 жыл бұрын

no kidding, these things are getting hard to find

@Sportzforifez 3 жыл бұрын

Good vid

@alfredohernandez4035 2 жыл бұрын

@@derricksnyder6535 lot of them at bass pro and dicks

@somarriba 4 жыл бұрын

You should partner with some of these companies and start your own starter kit for people who want to get into this and sell it... I'll buy one hahaha

@troyguinn303 3 жыл бұрын

Yes please!

@precisionanglingYT 4 жыл бұрын

They all look great!! Just got my molds in, going to remelt all my old baits, probably 200 lbs worth

@WorldsWorstFishing 4 жыл бұрын

dang!!! thats mega

@Cozmo2k4 4 жыл бұрын

Wow, that will take a while, good luck!

@precisionanglingYT 4 жыл бұрын

World's Worst Fishing will a summer long project, maybe longer

@jacktravis9700 4 жыл бұрын

Good luck

@haydenmansfield114 4 жыл бұрын

Precision Angling ez 9’

@DustyTheDog 4 жыл бұрын

I got some saucy swimmers for the first time last week. Man I really like the smell of these things. As weird as it sounds I'd buy a candle of that saucy swimmer scent 👍🏻👍🏻

@WorldsWorstFishing 4 жыл бұрын

they smell great

@fnerXVI 4 жыл бұрын

I'd compare it to black licorice.

@kboutdoorspnw3147 4 жыл бұрын

Jeremy the smell is anise oil, which is used in licorice candy

@DustyTheDog 4 жыл бұрын

@@kboutdoorspnw3147 it isn't just anise oil. My grandmother makes spiced cider every christmas and anise is one of the spices, this does not smell like that spice. It has a more sweet smell, with something else mixed in there.

@420_Logan 3 жыл бұрын

@@DustyTheDog They smell like the candy Good & Plenty imo

@bad_player_btw6410 4 жыл бұрын

I’ve been waiting for this 👍🏻

@WorldsWorstFishing 4 жыл бұрын

hope you enjoy man

@robertslover5725 4 жыл бұрын

Love the videos that you are using actual bait to meltdown to reuse. That has been very helpful information as I am starting out new and want to reuse

@WorldsWorstFishing 4 жыл бұрын

Glad to help

@OutdoorMike 3 жыл бұрын

Looks excellent! I have been watching a ton on your videos. Really enjoying them.

@kolbybaker1924 4 жыл бұрын

Oh how much I’ve been wanting a new video from you every hour since the last one😂

@WorldsWorstFishing 4 жыл бұрын

haha I appreciate it more than you know, thanks for the enthusiasm.

@NumiSmatiK100 2 жыл бұрын

*Great item. First cast out of the package caught a nice bass. Pulls smooth in the water and sets up nicely immediately upon retrieval. Worth adding to your tackle box.*

@christophersmith613 4 жыл бұрын

you should get the epic pud mold from Marling baits and do some glow in the dark lures

@WorldsWorstFishing 4 жыл бұрын

I have my own line of hand pour swimbaits with Angling Ai...keeps me busy enough

@DogDudeDrone 4 жыл бұрын

Th epic pud is by Epic Bait molds, they just partnered with Marling to promote it.

@zimmyplayz1755 4 жыл бұрын

@@DogDudeDrone marling designed it tho

@MrSandyBruce 4 жыл бұрын

Wow. Outstanding remelt. I bet anyone in here would buy those. Good job sir!

@ryanwilliams-ui4nr 4 жыл бұрын

Liked them all. The laminate punch bugs were my favorite

@wildlifeexplorers2260 4 жыл бұрын

Great video .can't wait for more I've been waiting for this. Awesome molds .

@WorldsWorstFishing 4 жыл бұрын

More to come!

@wildlifeexplorers2260 4 жыл бұрын

@@WorldsWorstFishing looking forward to it

@idkwhattomakemyname101 4 жыл бұрын

I love the re-melt videos so much

@WorldsWorstFishing 4 жыл бұрын

thanks man

@undeadfangirl4870 3 жыл бұрын

I never knew I wanted to make fishing lures XD So satifsying!

@WorldsWorstFishing 3 жыл бұрын

its the best

@doug42780 4 жыл бұрын

It's very cool that u can make your own lures. I wish I could do it

@eddieeggleston6642 3 жыл бұрын

Awesome work!!

@InvinciblePosts 3 жыл бұрын

Man I don't like the googan squad but I gotta say their soft plastics kick ass

@micahcorrigan1121 4 жыл бұрын

Hey Chris. Love the content ! And would love to see more rod builds . Keep up the good work !!

@WorldsWorstFishing 4 жыл бұрын

Thanks! Will do!

@timmorrison8108 3 жыл бұрын

I love watching your videos for tips and tricks

@SponsoredByMeFishing 2 жыл бұрын

That Swimbait at the end is amazing. I also like how their craw went from Krackin to Kraken with that octopus mold.

@FloBass 4 жыл бұрын

First vid I've watched of yours. I was definitely considering subscribing after about 6 minutes, but at 9:45 seeing as your a fellow rhythm section member that pretty much sealed the deal.

@lanekuchinsky7908 4 жыл бұрын

Been waiting for this one!

@WorldsWorstFishing 4 жыл бұрын

thanks Lane

@ShaneJMcNair 4 жыл бұрын

Love 'em or Hate 'em, the Googan's redefined the marketing side of the professional fishing industry. More young people than ever have taken up fishing again. Rob & Hector being the brain child behind the idea... A lot of hard work went into building this brand that exploded overnight... I believe you will see it around for years to come. Yes, the original Ragetail patent was used on the first generation, but the Googan's later redesigned the tail on the Bandito Bug & Crack'n Craw. The new packages have Patented Applied For on them. If you can find an old package and compare it. The 2 packages show the difference between 1st gen & 2nd gen. The Bandito Bug is their #1 seller. Thank you for sharing.

@WorldsWorstFishing 4 жыл бұрын

yep, they created a whole new way to market fishing

@Flarexxxx 4 жыл бұрын

"Expensive" bruh takes me a month to get a single pack up here in Canada XD always using a lighter to mend them to keep the same 3 packs rolling lol

@onthewaterpodcast5510 4 жыл бұрын

flarexx.xx I felt this in my heart

@macklangen9000 3 жыл бұрын

bro where in canada do you use googan baits

@treydenfrench7009 3 жыл бұрын

Mack Langen there are smallmouth and largemouth in BC/Ontario/ Saskatchewan/ Manitoba/ Quebec

@macklangen9000 3 жыл бұрын

@@treydenfrench7009 Awesome, I live in Alberta :(

@balls8229 3 жыл бұрын

Bro I can hook you up Gi to a website called Bugmolds.com and there is a super cool bandito bug mold it litteraly is a exact remake of the bandito bug

@harrywhite6236 4 жыл бұрын

When this video started I was thinking "this is gonna suck". But I like this guy. Thanks for the video

@sufferedenuf 4 жыл бұрын

Liked all the results but favorite remelt is the smooth worm on the left. Great stuff!

@WorldsWorstFishing 4 жыл бұрын

Thanks

@saltwatersportsman6039 4 жыл бұрын

Yessir I’ve been waiting for this

@WorldsWorstFishing 4 жыл бұрын

right on

@garybowers9605 4 жыл бұрын

Love those swim baits. Great as usual.

@WorldsWorstFishing 4 жыл бұрын

Glad you like them!

@ExistentialIntrovert 4 жыл бұрын

Video was awesome! Subbed as soon as I heard your drumroll!

@pimpshack81 4 жыл бұрын

Man those came out way better than I thought they would being melted down.. those punch bugs are the best in my opinion .. awesome awesome awesome 🤜🤛👊👊👊

@WorldsWorstFishing 4 жыл бұрын

Glad you like them!

@Shuya92 4 жыл бұрын

Awesome video. I like the laminates the most. That mix of colours just pops. Do they still keep the anise scent from that slaunch sauce from the original googan bait?

@kylejohnson5585 3 жыл бұрын

well I appreciate you walking us through this and im sure ill use this as a method for the googan baits I do get once the fish chomp them up lol but for science there must be a sacrifice!

@majorlazer83 4 жыл бұрын

I really need to get some molds. I've been looking but not sure where to get them from. Any recommendations greatly appreciated!

@jskoutdoors7640 4 жыл бұрын

dang those creature baits look so good!

@taylorjoshd 3 жыл бұрын

WOW!!! Those bandito bugs you put the extra blue in were AMAZING!!!! Nice job, Brother

@WorldsWorstFishing 3 жыл бұрын

Glad you enjoyed

@seizedcarcass8440 2 жыл бұрын

If I were going to start making my own plastics what molds do you recommend? Also is it necessary to have doors open or can a fan or two running be enough air circulation?

@HellaBass 4 жыл бұрын

Those laminate punch craws were straight 🔥🔥🔥🔥🔥

@ballzybaits4414 4 жыл бұрын

I like that worm mold you have. looks awesome!

@WorldsWorstFishing 4 жыл бұрын

Thanks!

@mannythecuban1122 4 жыл бұрын

Great video how you deal with the bubbles when you melt it, a clear coat help but no enough, Thanks

@WorldsWorstFishing 4 жыл бұрын

u need a vac chamber to remove bubbles

@skywatson8283 4 жыл бұрын

Ok thanks, I’ll look around.I’m the Swat Baits guy by the way. Very green at this but trying hard and learning a ton from you. I appreciate all your vids.

@WorldsWorstFishing 4 жыл бұрын

Glad to help

@SJBassin 4 жыл бұрын

I like how the worms came out. (hand pours) Good video as usual!

@WorldsWorstFishing 4 жыл бұрын

thanks buddy

@chrisgonefishing115 4 жыл бұрын

Great content as always!!!!! I haven't even watched the video yet.. Still on the adds lol ik it will be good!!

@WorldsWorstFishing 4 жыл бұрын

the ads make it all possible! haha

@chrisgonefishing115 4 жыл бұрын

@@WorldsWorstFishing sometimes but i fight through it!!! Lol

@terrymccorkle1674 4 жыл бұрын

That dual color is awesome

@johngtz72 4 жыл бұрын

Pizza sounds good. Awesome outcome. Great work as always.

@WorldsWorstFishing 4 жыл бұрын

It was!

@albow4oops5 4 жыл бұрын

Love your channel, have watched every video. I'm about to get started making soft plastics, could you do a video in using cut up re melts for colorant in straight plastisol? I'm curious if this is a way to make plastisol stretch while saving on colorant.

@danielkotowski8958 4 жыл бұрын

As soon as you pulled out the Ralph Hardimon’s I liked and subscribed. Lol

@262Fishing 4 жыл бұрын

I just found your videos. I've never melted plastics before but always hate throwing old baits away after they're beat up. Do you have any good videos for just getting started with melting/molding?

@justinmccollum3897 4 жыл бұрын

What brand of colorant is best to use?? Also, should I use standard colorant or Non-Bleed colorant??

@mustafakurtulmus5180 2 жыл бұрын

First of all, take it easy, hello, I'm Mustafa relieved, I'm watching you and admiring the products you've made. I'm grateful to you for being informed and giving us information while watching you. Do you mix a component as a mixture, thank you, take it easy 🙏🙏🙏🙏

@eliset7512 9 ай бұрын

Comes with case, good quality and great pricing

@hunterblock6192 4 жыл бұрын

Love your videos, keep up the great work. I'm starting to make soft plastics because of you. I have a question, what kind of mold would you recommend that is similar to a Keitech Swing Impact(not the fat one)? thanks

@WorldsWorstFishing 4 жыл бұрын

great to hear...not familiar wuth any keitech knock offs

@takeakidfishing3130 4 жыл бұрын

Great looking baits!!

@WorldsWorstFishing 4 жыл бұрын

Thanks 👍

@scottharris38 4 жыл бұрын

I'd kill for some of those ribbon tails. And markings Nate's octopus as well. He's my favorite dude on KZfaq.

@davidc.8717 4 жыл бұрын

Cool video! Those frogs turned out looking nice. Edit: all the baits turned out really well!! It would be really cool to learn how to do what you’re doing.

@onefourteen 4 жыл бұрын

Have you ever taken versions of the ‘same’ color from different brands and did a re-melt? Like Zoom Junebug meted with Reaction Innovations Junebug. Could be interesting?

@WorldsWorstFishing 4 жыл бұрын

havent done that yet

@chrishebert3240 Жыл бұрын

That’s a very good idea!

@magnessfarmswildlife 4 жыл бұрын

I just ordered a stickbait mold, I’m looking forward to making some baits!

@WorldsWorstFishing 4 жыл бұрын

send it!

@magnessfarmswildlife 4 жыл бұрын

World's Worst Fishing I’ll try

@darrenlay7195 3 жыл бұрын

This is funny i just got a bandito bug mold its only a single but still awesome

@kyle5046 4 жыл бұрын

Googan Squad Best Squad

@dannymarshall9132 4 ай бұрын

Where did you get the 9" ribbon tail worm mold. Is that one an injector too. Or hand pour? I'm looking to just do the worm, 1 creature style and a smaller swimbait. What molds do you use?

@derontucker7173 9 ай бұрын

You was a drummer… I was… great consistency bro

@bobbyhempel1513 2 жыл бұрын

That June bug/ watermelon blue laminate looks great.

@checkmate2049 4 жыл бұрын

I was wondering if you would do a video. Something similar to this but add fish attraction scents with it. Just a suggestion

@micahmustang 4 жыл бұрын

The laminate punch bugs looks like the sprayed grass you've done

@gurohyena3649 4 жыл бұрын

I'm still hoping for remelt roulette one day. I really loved those laminates! They looked really nice.

@WorldsWorstFishing 4 жыл бұрын

thanks bud

@gurohyena3649 4 жыл бұрын

@@WorldsWorstFishing Absolutely. I'm always excited when I see a new upload from you.

@OhKee12 4 жыл бұрын

The junebug and green pumpkin laminate is called Bama bug, cool color and super good during spawn and fall.

@WorldsWorstFishing 4 жыл бұрын

yeah it made a great bama bug

@OhKee12 4 жыл бұрын

World's Worst Fishing sure did hope it works well for you👍

@YoderJosh 4 жыл бұрын

I love your videos and this one is no exception. Sometimes I find myself thinking, I would just like to fish the sprues. Like a cross between tube and paddle tail. Maybe a weighted swimbait hook? Maybe a trailer treble? Could be a fun video.

@WorldsWorstFishing 4 жыл бұрын

I will try it for sure

@stevenreep385 4 жыл бұрын

Nice! Can you turn the blending block while you're pushing and see what that would look like. I've always wondered ever since I've seen you make the first laminate. And my favorite was the junebug/green pumpkin

@WorldsWorstFishing 4 жыл бұрын

its just random...doesnt swirl in a spiral

@stevenreep385 4 жыл бұрын

Well shoot I was hoping it would be an awesome swirl thanks for answering though

@shadow_stalk 4 жыл бұрын

i just stumbled apon your channel and im hooked!!!

@WorldsWorstFishing 4 жыл бұрын

Awesome to hear man! Welcome

@d.moutdoors4377 4 жыл бұрын

Great job enjoy your videos

@WorldsWorstFishing 4 жыл бұрын

Glad you like them!

@michaelleady9089 4 жыл бұрын

I like them all but I’m a fan chart green or yellow mix or fleck or flake in the bait

@dustinbrinker2733 4 жыл бұрын

I have the 4 inch angling ai swimbait mold will you be doing any videos on that.

@ClubDoobie 4 жыл бұрын

You don’t know how long I’ve looked for some of these colors

@raymondpadilla65 Жыл бұрын

where did you get your molds n injector stuff ty?

@danabellefeuille8485 Жыл бұрын

also i think the giant clear fish at the end was amazing,, work great on big fish. wonder if possible make a rubber spider,, i know bass loves big spiders, hmm

@pimpshack81 4 жыл бұрын

This is going to be awesome .. I’m really curious how these will melt down and end up

@WorldsWorstFishing 4 жыл бұрын

they did great!

@pimpshack81 4 жыл бұрын

World's Worst Fishing yes they did. I always wondered how they would melt down .. you answered that question .. and knocked it outa the park

@redelfoutdoors9668 4 жыл бұрын

Like the punch bug laminate. I’m not usually a fan of bug/thing worms but that one is awesome!

@redelfoutdoors9668 4 жыл бұрын

Should have waited till end to comment I like the ribbon tails to!

@TheChadillac8907 4 жыл бұрын

Man I’ve been wanting this!!!!

@WorldsWorstFishing 4 жыл бұрын

thanks for tuning in

@TheChadillac8907 4 жыл бұрын

World's Worst Fishing I’d love to see you do a Texas roach color especially in a craw

@JWard-sp7wt 4 жыл бұрын

That swimbait near the end was amazing.

@WorldsWorstFishing 4 жыл бұрын

Thanks sir

@A.Blair_Fishing 2 жыл бұрын

The "slaunch sauce" makes for a decent air freshener in the car when I leave my rods in the car lol. Seriously though Googan baits catch fish, but rip insanely easy.

@heathenoutdoors4788 4 жыл бұрын

love the video. how did the anise hold up?

@staffordfarms9519 4 жыл бұрын

I have just ordered my stuff to start my bait company I have a couple grub molds and a worm mold and wondering what the next step is.

@wyattmartin534 4 жыл бұрын

Make baits lol

@saleen12 Жыл бұрын

I wonder if in some situations if it would be cheaper to buy plastic baits on clearance in a color you like and remelt them vs buying ingredients

@skywatson8283 4 жыл бұрын

The frogs are great, I gotta get one of those molds.

@WorldsWorstFishing 4 жыл бұрын

its a custom mold...but there are great frog molds you can buy on the market

@fn_corx4703 2 жыл бұрын

I would love you try to find that heat stabilizer what is the name of it. Anyone know what heat stabilizer is good

@petehorn6705 4 жыл бұрын

awesome video brother. hope lakefork fishes with you one day haha

@WorldsWorstFishing 4 жыл бұрын

Maybe one day!

@edwardsavje1476 3 жыл бұрын

Creature, came out awsome

@landonwest4701 4 жыл бұрын

The junebug Okeechobee craw laminate was awesome! On a side note, what size hook does the punch bug like? Trying to get a idea of the size. Great work!

@WorldsWorstFishing 4 жыл бұрын

4/O flipping hook

@josephpilmanphotography 4 жыл бұрын

Where do you get your soft plastics bags made or ordered? I would like to make some packaging for my plastics.

@WorldsWorstFishing 4 жыл бұрын

all the fancy printed bags are made in china..only place to get them really

@mikebanks6704 4 жыл бұрын

Funny how you like lfg so much and his newest boat review video is the 1st recommended video on the list under ur vid 👍👍

@WorldsWorstFishing 4 жыл бұрын

Cool 👍

@waydebaker33 3 жыл бұрын

Dude I would love it if you took over Monsterbass one month. That would be dope. You're badass dude.

@WorldsWorstFishing 3 жыл бұрын

haha thanks!

@knockerz3140 4 жыл бұрын

When he pulled out the sticks it made me happy to see another percussionist fisherman

@dylangould2566 4 жыл бұрын

Me three

@paulkfoury3908 4 жыл бұрын

That’s a sweet idea

@pedromonti7227 4 жыл бұрын

The frog color he made looks great

@jacobjanningfishing 4 жыл бұрын

My first time watching your channel love the videos

@WorldsWorstFishing 4 жыл бұрын

Glad you like them!

@theUN4saken2202 4 жыл бұрын

I use a lot of the drag-n-drop worms for dropshot

@michaelross5674 9 ай бұрын

I like the double pour and ribbon tail