GoPro Tips: How to use Suction Cup

No video

GoPro Tips: How to use Suction Cup

Рет қаралды 63,179

Күн бұрын

Grab your GoPro and see how to stick it on cars, boats, motorcycles and more to capture amazing footage at speeds over 150 mph. We’ll go over the basics, plus show you all the ways you can set up your Suction Cup to get shots that would be impossible with any other mount.
Shop now: gopro.com/en/u...
Get stoked and subscribe: bit.ly/2JrvqO4
For more from GoPro, follow us:
Facebook: / gopro
Twitter: / gopro
Instagram: / gopro
TikTok: / gopro
The Current: gopro.com/news
GoPro: gopro.com/chan...
#gopro
Music: Chonklap! - Out Of Flux.
artlist.io/son...

Пікірлер: 69

@ZezimasMyMain 8 ай бұрын

Go pro instructions are actually some of the worst instruction I’ve ever seen. Kinda mind blowing.

@tday2870 8 ай бұрын

Fr! Please show me how to assemble this thing without a bunch of quick jump cuts. What do all these different accessories do? How do I toggle this thing? 😩

@pfunk360 2 ай бұрын

You can say that again.

@STAG162 Жыл бұрын

now you guys need to develop a way that doesn't need hex-nut retro-fit reinforcing to stay in its place. I can't tell you how many of these I've lost just by placing the thread through the fingers and then the dome nut pops out. also 1:20 you'll need to wet the underside of the suction cup for maximum adhesion, or you can lose them, ask me how I know.

@KennethGreenCMP Жыл бұрын

I am glad you guys make these videos. I dislike when someone can't figure it out and claims the products dont work.

@Daweisstebescheid Жыл бұрын

I would be afraid that it would suddenly fall off while driving a car 😳🤷‍♂

@ZARICKH Жыл бұрын

I have already tested it outside of the car at 190 km/h and all it’s 👌🏻

@Daweisstebescheid Жыл бұрын

@@ZARICKH if you lose the thing, the gopro is history, lost. a small mistake in mounting and it comes loose, maybe not immediately but suddenly and then the camera is gone😂

@BayAreaMotorcycleCommuting Жыл бұрын

Just use a tether with the mount so that if the suction fails, the camera and mount will just dangle from a cable / cord that’s mechanically fixed to the car (rather than falling completely off the car and getting damaged / lost)

@Daweisstebescheid Жыл бұрын

@@BayAreaMotorcycleCommuting that would be a possibility, but can damage the car

@BayAreaMotorcycleCommuting Жыл бұрын

@@Daweisstebescheid I suppose it depends on where the camera is mounted on the car, but I do this often and have never had an issue

@Rush-Media Жыл бұрын

Those that have their doubts should try one. the suction is truly impressive. I left mine attached to the outside of my house for days in rain and it never failed. Make sure the surface is clean first of course!

@pricepointstories Жыл бұрын

have you tried it on a car and driven on a bumpy road? does it hold?

@Rush-Media Жыл бұрын

@@pricepointstories I've driven at speed multiple times on semi bumpy roads and it has never come off so far. I do take the precaution of cleaning hte surface first and always use a tether just in case

@abdirahmanmahamoud5938 Жыл бұрын

@@Rush-Media hi what kind of tether do you use. thank you

@SamuelRush Жыл бұрын

Paracord works well

@n0.- Жыл бұрын

What’s the safe temperature range of the suction cup?

@garryluke4527 Жыл бұрын

Any tips on hanging upside down. I’m trying to us in my music studio and it keeps falling off. It’s suctioned onto laminate. Barely lasts 5mins, If it can hold onto a car driving it should be able to do this. Or is it not designed for upside down?

@inspiredKREASHUNS 2 ай бұрын

Yes but how do you actually put it together?

@BareKiwi Жыл бұрын

YES!!! I made this video! Both at 0:15 and then again at 0:38 BOOM

@franesmolic Жыл бұрын

Thats dope, how did they find it, you taged them or ... congrats as well, to be included in GoPro video ... 🤙

@flat-earther Жыл бұрын

hi barekiwi have you become a flat earther yet? If not I suggest watch a 13 part series called _What on earth happened_ by Ewaranon to learn that the earth is not a globe. I got it in my about tab.

@metromaster2010 Жыл бұрын

I have this accessory and it works pretty well, although I have not used it in the extreme examples shown here

@mrjeff2396 4 ай бұрын

No matter what, I still highly recommend a wire safety tether!

@1xiao1 Жыл бұрын

i’m still wondering how to build it-

@jnboado Ай бұрын

😂😂 me too. I had mine for 3 years

@AverageSeaCucumber Жыл бұрын

"Hey, I wrote you a song! And it goes a little something like this..."

@sunilkumar-iq2oq 10 ай бұрын

You did everything except putting it on Windshield. Will it break the windshield if we mount it and remove time to time?

@ssymons03 6 ай бұрын

0:50

@sunilkumar-iq2oq 6 ай бұрын

@@ssymons03 I have been using it regularly and nothing happened to my windshield. I mount it and remove it everytime.

@t-ime 11 ай бұрын

can you use this under water in a pool? on the floor or wall

@pricepointstories 5 ай бұрын

I have the suction mount but when i mount it on the side glass window of my car, it makes the gopro vertical. What intermediate device have you used to make it horizontal while mounting on the side window of your car?

@GoProTips 4 ай бұрын

Hi, this is a feature we call "Orientation Lock". You can find this setting by swiping down on the back touch screen and selecting "Orientation Lock" on the dashboard!

@asifiqbalrs 9 ай бұрын

is it compatible with DJI Osmo action 4?

@ismmarreyes2110 7 ай бұрын

Find it hard to believe there’s no way to articulate this mount left or right, the camera can only face straight. For example, when mounting on the side cockpit window the camera can only point straight ahead, there’s no attachment that allows it to be twisted left or right. Had to buy a whole other suction mount with an articulating arm.

@freethatsoul Жыл бұрын

Does it work in negative temperatures ?

@iappreciateyourkindness Жыл бұрын

I would like to get one .how much is it ?

@CalebLawrence007 Жыл бұрын

Y’all put a lot of faith in a suction cup😂 gotta give it to y’all 🤙🏼

@GoProTips Жыл бұрын

An industrial-strength Suction Cup proven to work at speeds of 150+ mph 💪

@BayAreaMotorcycleCommuting Жыл бұрын

The suction works great, and if you use it with a tether, you don’t need to worry about losing or damaging your camera if the suction fails. Slightly surprised they didn’t include that tip in the video

@AdiosAdiosAdios Жыл бұрын

@@BayAreaMotorcycleCommuting thats a really good tip

@pricepointstories Жыл бұрын

@@BayAreaMotorcycleCommuting how do you tether?

@pricepointstories Жыл бұрын

@@BayAreaMotorcycleCommuting if you can share any tips on tethering, it would be helpful.

@dhritikannadavlogdubai 10 ай бұрын

Super bro 👍

@pricepointstories Жыл бұрын

There was a magnetic one too which was supposed to be fitted to metallic exteriors of a car. Is that discontinued now?

@canyonblue737-8 Жыл бұрын

GoPro has never offered a magnetic based ones designed to hold to a moving car. They offer a magnetic clip but it is very weak and struggles with more than a GoPro alone on a non-moving metallic surface. There are several 3rd party options with powerful magnets meant for vehicles you can look for.

@pricepointstories Жыл бұрын

Yes, probably a 3rd party one