Got the Jet Kit Installed on the Honda Magna and it's Fast

No video

Got the Jet Kit Installed on the Honda Magna and it's Fast

Рет қаралды 16,701

Күн бұрын

Finally got the jet kit installed and its definitely a lot quicker.
/ james_revels_96_magna
Gear used:
* 96 Honda Magna 750
* GoPro HERO 7 Black: amzn.to/2U22Oi8
* Purple Panda LAV MIC: amzn.to/2U7B2AH
* GoPro MIC Adapter: amzn.to/2IKrmqD
* GoPro HERO 7 Case: amzn.to/2WfRz8v
* FREEWELL GoPro ND filters: amzn.to/2IMfnJa
* SEDIDI STRADA helmet: www.cyclegear.....
* BILT Gloves: www.cyclegear.....
* Iron Workers Steel Jeans: www.cyclegear.....
* BILT Techno Jacket: www.cyclegear.....
* Cardo Freecom 4+ Headset: www.cyclegear.....
This site contains affiliate links to products. I may receive a commission for purchases made through these links.

Пікірлер: 75

@jamiejim2505 2 жыл бұрын

I own about 45 bikes, Magna is my no. 1 favorite, no kidding.

@wherethereisfaith Жыл бұрын

I have a 1995 Honda Magna and it missed terrible between 1 and 3 k of rpm. A buddy is gonna put a DynaJet kit on it for me after we clean the carbs. Hope that fixes the issue.

@rogerbox6086 3 жыл бұрын

I hope u get the valve timing adjustment .highly recommended with the Exhaust and jetting...

@jamesrevels 3 жыл бұрын

That was done when the guy did the jet kit. He made sure everything was 100% and even dynoed the bike afterwards.

@dreamer2355 2 жыл бұрын

How do you adjust the valve timing on the bike?.

@rogalandimportservice6747 2 ай бұрын

What did it dyno? @@jamesrevels

@billbertagnoli4226 3 жыл бұрын

Get a bugshield or small Windshield. You will enjoy That bike much more. Where I live 20 degrees is Cold. Not kidding.

@jamesrevels 3 жыл бұрын

I have a full size windshield but I don’t like using it. I’m looking for a factory front fairing but they are hard to come by for a good price. I may end up ordering an aftermarket one for the time being. It does get cold here too, it will be mid 30s when I’m headed to work in the morning

@toddsamuel8532 3 жыл бұрын

@@jamesrevels how much are the factory ferings you have come across

@jamesrevels 3 жыл бұрын

If you find them, I’m seeing them around $100-$150 I did find one for $80 but I missed it

@dco956 2 жыл бұрын

U can unscrew the baffles ....then pull out with plyers....... California models u gotta cut out with tourch.........sounds awsome.....I have a street sheid ( midsize sport windshield....works great looks great

@psychedelicbdsm7301 3 жыл бұрын

“it’s pretty cold out” “67 degrees” dawwg i daily drive my Magna in mi, I get excited when the weather is anything over 46 and yes, it takes 2 mins to crank her to start and another 10 mins for her to warm up

@jamesrevels 3 жыл бұрын

I ride in anything unless it’s raining or icy. Temp is supposed to be in the low 30s tomorrow and I’ll ride depending on what the snow we are supposed to get does. When I said it’s cold, I was wearing summer gear😂

@Scattypatty 3 жыл бұрын

Not mine man I live in the mitten only take a second to get er goin lol

@crustycoyote6009 3 жыл бұрын

1:40 was that the chop you were talking about? That miss or sputter? Sounds like a lean cylinder, like a stuck slide or leaking diaphragm. Glad your dude got it straitened out for ya.

@jamesrevels 3 жыл бұрын

That sputter is from a clogged fuel screen in the fuel tank. I’m waiting on a part to come in to replace it. If I put it on reserve, which bypasses that screen, it clears up.

@billbertagnoli4226 3 жыл бұрын

Kerker and Supertramp used To make some nice exhaust Systems for the magna.

@jamesrevels 3 жыл бұрын

I’m not a fan of how it looks, but I love the way the bike sounds and I get a lot of compliments on how it sounds. I’ll leave it as is. Plus if I go to a 4 pipe design like factory, I will lose power

@JoeRocket-sf6qs 5 ай бұрын

Seems like the bike may be lean, popping on decel,may be the pipes….no it’s running lean alright ,better be careful not to burn up your pistons.

@ogre666ds 3 жыл бұрын

I have a 97 magna deluxe when I bought it it had the exhaust cut off of it took me 2 years to find an exhaust I can afford but I believe it came with the cobra slash cuts

@everythinggaming7938 3 жыл бұрын

Take care of her

@cheloperez6352 2 жыл бұрын

I do I got a magna myself that sounds like a monster 👹

@tkong35 Жыл бұрын

What kinda exhaust u running ?

@dylankittle5079 3 жыл бұрын

Just bought a 94 two weeks ago love the content

@jamesrevels 3 жыл бұрын

You will not be disappointed with the bike. Congrats on your purchase

@finaufangupo2828 3 жыл бұрын

How much would y’all pay for a 94? Besides Kelly book pricing . Just curious

@jamesrevels 3 жыл бұрын

I’m finding them around me for $1,500 to $2,500

@13monkees 2 жыл бұрын

Hi! I just bought a ‘94 for 3k with 16k miles.

@aidenbrady2372 2 жыл бұрын

I have a 95 magna but it is the deluxe version. I have been living the bike so far.

@kebello10 3 жыл бұрын

Mine it does not bug down but i can’t reach the red line (powerband)?!!

@everythinggaming7938 3 жыл бұрын

You guys should try the voodoo 4 into 1 slip on sounds just as mean

@lifeofkenny5094 2 жыл бұрын

What size jet kit did you go with ?

@jamesrevels 2 жыл бұрын

108s

@LostinTimeYT 2 жыл бұрын

I'm in Tulsa too. Do you mind saying who did your carb work?

@jamesrevels 2 жыл бұрын

A guy from Manford. He charged $200 for the work. He was a tech for years at Honda of Tulsa

@LostinTimeYT 2 жыл бұрын

@@jamesrevels Gotcha. Bike sounds great btw!

@phwasser Жыл бұрын

67°F is cold I wonder you what you call 34°F? I'd love to have a 67° morning

@jamesrevels Жыл бұрын

I said it was cold because there was moisture in the air and I was wearing summer gear. I ride year round and regularly ride when it is in the 20s and 30s, but I have gear for that

@Luis.A.Hernandez 3 жыл бұрын

it sounds different because you have more air and moving faster now, I can hear lower frequency, before the sound was like a small trompet, small difference but sounds better now.

@jamesrevels 3 жыл бұрын

Thank you, it definitely sounds better, I had the pipes and intake mods done, just didn’t have the fuel to compliment it. Now it’s running great

@fatTony463 4 жыл бұрын

Hello, The pop, you referring to is back firing.? Did you have a jet kit installed? Likely a tune of different jets could have done same thing. One other thing would be to have carbs ultrasonic cleaned before adding any type kits to carburetor to get best results. Cheers

@jamesrevels 4 жыл бұрын

The guy that installed them just rebuilt them last year and he did clean everything good. Tune is good and carbs are synced. What I meant by pop is the extra fuel running into the exhaust and reigniting when decelerating. It’s pretty normal with open exhaust. My truck even does it, just not as noticeable

@drybso 3 жыл бұрын

@@jamesrevels what size main jet instal ?

@jamesrevels 3 жыл бұрын

I used the DynoJet stage 1 kit and because I have after market intake and exhaust, I used DJ108 jets. Depending on your setup you may go with something smaller

@2gripzcruiser 3 жыл бұрын

About how much would i have to pay to get rejetted and tuned as a ballpark figure i have The same v45btw just bought it 5 days ago and loving it

@jamesrevels 3 жыл бұрын

I know the guy pretty good so I may have gotten a better deal, but I paid $200 to have mine rejetted and dyno tuned. But the same guy had rebuilt the carbs 6 months prior, so they didn’t need to be rebuilt or cleaned

@2gripzcruiser 3 жыл бұрын

@@jamesrevels thats cool so that gives me a good idea of what to expect thanx man

@smalltowndodge9477 3 жыл бұрын

What powers it making

@smalltowndodge9477 3 жыл бұрын

I got one just wondering

@jamesrevels 3 жыл бұрын

80hp at 9k