Thank you for showing how you dealt with the wire "dog ears" at the back of the TV. Much appreciated.

Picked mine off my front porch this morning before work. Super excited.

Just ordered this kit for my new 75 inch Samsung and I'm excited. Your review helps ease my mind about installation. Thanks a bunch.

Thanks for the great review. I was looking at both the immersion kit and also the Govee flow pro light bars. Not sure if you've used those or not but do you know if there's a performance difference between the two? Or even which you think is best? Cheers

I recently bought the 75”-85”inch one for my 70”inch tv and it covered it perfectly I do recommend sizing up and just hold down the left over cable

Thanks! Mine just came today! This is a lifesaver!

Just got mine. Amazing !

Got mine today thanks for the video !

Thank you! Looks like I'll be buying!

Very thorough! Thanks so much😊

Great review

Hello, I have a question. I have a goove led kit installed on my tv already. Could I use that existing one and connect the immersion control box to it?

Great video!

Just got mine today from best buy, they had them on sale

Thanks for the reivew. Nothing beats Hyperion I guess.

Thank u man. U are great 💖🙏

I had trouble calibrating using those orange tabs. There was too much reflection. I found the BEST way to calibrate. Find on KZfaq "white screen". There's a very long video of white screen. Play the video and whole screen is white. You can see exactly where your calibration lines should go.

Thank you, sir.

What these reviewers and Govee do not tell you, is that it takes 21ft of LED strip to cover an 85"inch TV from corner to corner, they sell and advertise a set of immersion lights for TV from 75-85" but that kit only comes with 16.5 ft of LED strips, that does lot cover your 85" inch TV, and the corners will be awfully dark.

Hi, great demo thanks. Can you choose a static colour setup for when the tv itself is switched off? In other words ... can you switch this led strip on to have a lighting scene/effect on the wall when the tv is switched off?

@geeky stuff, did you have an issue with sticking the camera on, I have a very thin OLED tv and there’s no part for the large sticky pad of the camera to stick to

THANK YOU

So will this work on a 65in Samsung curved tv. Just wondering if the curves will affect camera at all.

Do you think this will this work with a 38" ultra-wide monitor ok? I will the wider aspect ration confuse the software?

I had a similar but far superior product called Dream Screen for a long time. Looks like they went out of business which is sad. It didn’t use a camera and was perfectly accurate. Oh well maybe another will come along again.

I bought the TaoX ones first but they have audio issues where they don’t really let my tv play audio for the longest time while they’re on and off they’re off I can’t switch the audio source back to tv workout unplugging them which is a real hassle, how does the govee kit handle audio?

Can you connect more than one strip light source?

hello I have a question I want to buy a Govee DreamView T1 TV backlight for my Samsung 65 inch curved TV, I read that it doesn't work for curved, why? are there any alternatives?

Can you please check if the power is 110-220v? Or only 110?

Thanks is this really help to calibrate mine lol

I like eating apples?! You got a comedian on your hands lol Thankyou for the guide, twas very helpful!

Will it fit a 75 omni smart TV that's mounted on the wall good

the kids were so cute omg 😂❤

Do you keep it on 2ghtz after configuration?

Hi i have a sound bar fitted to the top of my tv how would you fit the lights so the light does not bet obstructed

Does it set and save your settings and turns off and on automatically when your tv is turned off and on? Or do i have to turn on the tv and govee separately and configure the settings i want each time i turn on the tv/govee?

I dont lile how the camera sits on top of the TV. I've seen people connect them to bottom of the tv. I have tv on wall 6 inch above the tv and was wondering if I can sit the camera on the tv unit?

Who needs the Phillips Ambilight tvs now?

Hi, do you know if there is any difference between this product and Goveee DreamView T1 TV backlight? Only I ordered the DreamView directly from Govee, but when it arrived it said Immersion on the box.

I was wondering what is the relation of the strip and the wifi, because i am not able to connect the device with the Bluetooth and i am really trying to make it work do you have some clues for me. Thank you :)

not sure if i missed it, are you able to turn it on and off with a remote or its exclsuively the app where you can power it on and off

Great video, if you do t mind me asking how did you find the best way to calibrate to a curved tv?

Hi, so I just got these in today and took your recommendation of plugging them in before installing. But mine didn’t light up which I found to be weird considering the little blue light on the camera was blinking, just wanted your thoughts and what you think the problem could be. Thanks !

Does this take up one of your tv HDMI ports, or is it all controlled by the box? Tempted to give it a go

*Someone asked this question below*… “How long is power cable?” Everything mounts to the back of the tv. -LED power cord is 2.5-2.95 ft and goes straight To the back of the TV, -Camera cord is short just like the led power cord (goes to the control box stuck to back of tv.) -Main power cord goes to 12V plug 3.1-3.25FT. If you are on a entertainment center (power strip is built into the back of stand, every thing is perfect being short.) But to answer your question Main power cord to the control box- to the 12V plug is about 3.25-3.5 ft.

So do these need to be plugged into outlet or into the USB?

Awesome review!! Just ordered some but got to thinking; can I make the lights a simple, solid white ? Without the "immersion" ?

What quality is this camera? Got this as a gift. But concerned about govee having access to seeing the inside of my house. Is it just a light sensor or is it like a 1080 type of camera?

Great review however you dont mention power source how does it get power? My tv in past says not enought power to run usb device?

Do you need to attach the HDMI’s to the Govee? I use HDMI 1. HDMI 2, and HDMI 3. Would they all work? Thanks, great video.

Is there anyway I can fit this on a 45’ inch tv like if I move the light strips?😊

Hi there, I've been trying to set up the govee immersion for days but cannot figure out how to set up for DreamView. The camera won't calibrate. It's on a 2ghz router, all wired up correctly, lights work fine but i really wanted this gadget for the DreamView, so i can enhance movie viewing. If it's not to much trouble, could you please talk me through your set up on the app. Also, the app has uploaded the latest firmware. Cheers

Great video. BTW, Brown is DARK Orange.

I like this unit for the price. But the Phillips kit has corner and midline mounting brackets for the light strips which look to be valuable. You might be able to 3D-print similar brackets for the goveee.

My TV is on a stand. Can I configure it to only be on the top and two sides but not bottom?

can you connect other led bulbs/strip or you are limited to the one connected to the tv?

The cables that you tried shortening around the corners of the TV, do they come in with the box?

I dont get. Is the led strip longer and you cut some of it? Because if this is 55" tv and led is perfectly around tv then for 65" you wont cover all the tv back?

Wdy do if you have a 75" tv and the kit for 55-65?😊

Do these lights save your settings?? I bought some from Amazon and EVERYTIME i turn the TV on i have to manually select what color i want. Its annoying

question bro 2:24. is there a indication in the strips on which side of the tv it is supposed to be stuck on? or you can just put them randomly and they will still work the same?

Will this work in Indian power rating?

Hi what size would in metres would I need for 65 inch TV thanks

Only question I have, how do you get it to turn off with the TV? When I turn my tv off the LEDs remain on. Do I have to manually turn it off in the app every time?

Hm my TV stand is in the center and bulky. Not sure how I'm going to install the bottom strip. I'm afraid if I go above the stand the lighting will be weird and if I just stick them over it I'll have similar problems.

With the heat generated from the TV, does the adhesive come off overtime?

Mine is only showing reds. I have it set to video so it'll display the colors that are on screen, but it's only showing reds. Is there something I'm doing wrong?

Hello I just started getting into led lights And found out yesterday that Immersion tv led lights are a thing. My tv is a 49in tcl roku tv. Do you think I’ll have an issue with set up? (I think it’s kind of foolish that this brand doesn’t make smaller led lights)

I just ordered them few days ago and they came in today. I have a 55' would there be any left over LED strips?

Does this require your phone to always be connected to work or do you only need the app to configure it initially?

How do I work this with my Alexa? Have you tried that yet?

Trying to set up mine now Can I cut out the remaining led lights away from the tv

Can i use them without camera thanks in advance

I have an lg g2 series for ps5 and I installed govee. It’s ok and nice but is not as accurate as a my main tv for movies etc Phillips which works fantastic if you add hue and add other lights of your house.

hey people scrolling through the comments, i have a question. does this also work with a gaming monitor?

Quick question, since I’m an Apple guy and this doesn’t have Siri support, will this turn on automatically if I connect the power to a Siri enabled smart plug? Basically does it turn on as soon as it gets power or do you have to manually turn it on every time?

My TV is about 60 to 90cm away from the wall behind it, will the LEDs colour stretch all the way to the back wall? Are the colours quite strong?

I’ve set up the 2 camera version and tested movies like Blade Runner 2049, Tenet, Dune and Interstellar on 65” C2 and it’s just not doing it for me. Sometimes it seems to output quite accurately and adds immersion - other times it looks way off and seems more a distraction. Even in this video if you pause at 7:32 - why is it displaying orange in the upper corners when it’s clearly blue/white? I have Hue+ with 3 light bars for my computer, wanted a cheaper option for my TV and I wasn’t necessarily expecting the same quality but I guess it’s relative to its much lower price. Not sure if I’m gonna keep it. It literally sometimes seems like I just have a light strip doing its own thing while I’m trying to enjoy a 4K UHD Blu-ray and at that point I’d rather focus on the TV.

after pluggin in my lights for some reason they arent lighting up anymore. ive unplugged everything many times and they dont light up. anyone know why?

Installation issue-app never asks me about connecting to wifi and can’t get to camera installation. Followed instructions and have a bright blue light on camera, but will not initialize. Everything I read says to make sure you do not skip the wifi connection portion but it never asks for it. When I try to go to wifi settings it just goes straight to initializing camera which fails. I’ve tried deleting and reinstalling the device on the app and deleting and reinstalling the entire app on two different phones that are connected to wifi. Any ideas??

I have a 70' tv, i honestly thought i had a 75' tv, so i got the 75-85 one, its too long on each corner, about 4 inches too long on each corner. Stupid me. So i was just about to order those clips so i could cut it down so it would fit perfectly, but i was reading the questions on the Amazon app and on the answers it says no you cannot cut these, but one answer says you can, so can you cut these and use the clips?

possible to put the camera at bottom ?

😂😂😂 I like eating apples. That was good 👍🏽

Does this work with tv integrated apps or is it for consoles and fire stick only?

what happens if you accidentally hit against the camera, do you have to calibrate from scratch again?

Hi may be a daft question but do they work on a 120 HRZ TV

Everywhere I read it's not fits curved tvs, but you add on it, does it work on curved tv?

Can’t get my iPhone to find it on Bluetooth. Sticks around the enable Bluetooth section of the app. Any ideas? On 2.4ghz

Do you have to install the led strips in any order? How does it know the orientation and where to display color from the camera?

Help please Anyone know why my back-light is one solid colour, it picks the most dominate colour on screen instead of multiple colours around the screen

Would this look good with tv mounted on wall ?

Would this be difficult to install on a 43in TV?

Can we use govee immersion 55-65 RGBIC on a 24 inch monitor?

Do you think this would work on a 2021 Samsung 45inch tv ?

can i use it without the camera? i don't wanna sync video or sound

Hi, do the lights come on automatically every time the tv is turned on and shuts when you turn the tv off or you have to manually turn them on and off?

It’s now been 7months and mine have stopped work only work with Bluetooth now WiFi will not connect and apps freezes when I try to reconfigure the WiFi. Good thing I only bought one set . I have 5 tvs I wanted to do this too but I’m doubtful about this products if they stop working after a few months. And I also say this for a lot of new product coming out . If thies technology companies go broke there products brake to lol

I still have no clue how to Connect this govee system to my phone. I have the govi home app but I see nowhere to connect the device. I tried to connect to Bluetooth and it says I need an app that I already have. Any suggestion

Noticed your TV is not smooth plastic. Looks like samsung with rough surface ridges. Do the LED lights stick properly ?

my tv isn't right up against the wall. Its about 15 inches away. Would it still be worth getting these if it isn't close.