GPS POWERCABLE INSTALL on KTM 1290 Super Adventure S accesories connector ACC2 (Garmin Zumo XT)

Рет қаралды 24,138

Күн бұрын

Installation of the motorcycle mount & powercable, on the accesories connector ACC2 of my KTM 1290 Super Adventure S (KTM 1290 Super Adventure S 2021, KTM 1290 Super Adventure S 2022, KTM 1290 Super Adventure S 2023, KTM 1290 Super Adventure S 2024). To let the GPS / SATNAV (Garmin Zumo XT in my case) switch on/off together with the bike. (is the same for connecting/installing anything else on the ACC connector for example a TomTom Rider)
The video shows how to disambly the fairings of the KTM 1290 SAS to get to the front accesories connectors ACC2 en ACC1, how I installed my gps powercable and how I installed the fairings
Motorcycle Handlebar Mount Compatible with Garmin Zumo : www.amazon.de/-/en/gp/product...
Touratech GPS mounting adapter above instruments for KTM1290 Super Adventure S/R 2021 : www.touratech.com/gps-mountin...
👍 Thanks for watching !
🔴 Subscribe to my channel for more : / flamesadventures
--------------------------------------------------------------
👀 OTHER KTM VIDEOS :
🎬 My KTM 1290 SAS : • KTM 1290 Super Adventu...
🎬 My sportive suspension settings : • make your KTM 1290 Sup...
🎬 HEED crashbars installation : • Installing HEED CRASH ...
🎬 KTM Touring Topcase : • KTM TOURING TOP CASE f...
🎬 Touratech toolbox installation : • TOURATECH TOOLBOX inst...
--------------------------------------------------------------
🎵 MUSIC : KZfaq music
--------------------------------------------------------------
Content :
00:00 intro
00:25 Garmin Zumo XT unboxing
01:21 removing Zumo 660
01:44 disambly HEED crashbar
02:09 removing ergo seats
02:20 removing fuel tank fairing
03:24 removing front side spoiler
03:33 removing lower fuel tank fairing
03:57 removing right side fairing
05:10 removing air intake cover
05:35 removing mask spoiler
07:03 ACC connectors
08:14 removing old, installing new powercable
09:45 installig new GPS motorcycle mount
10:59 connectiong ACC2
11:23 installing mask spoiler
11:52 installing air intake cover
12:13 installing right side fairing
12:48 installing lower fuel tank fairing
13:10 installing front side spoiler
13:40 installing fuel tank fairing
14:27 outro
#ktmadventure #ktm1290superadventure

Пікірлер: 33

@FlamesAdventureS Жыл бұрын

To remove the fuel tank fairing, you don't have to remove the bolts of the fuel cap. I removed it because of the GIVI tanklock

@charlespillette6552 Жыл бұрын

Very professional presentation, free of useless likes and dislikes. I just used this to install a Garmin on my new Adventure, when it was very helpful. I put my laptop in view in the garage and just followed each step, pausing the video as I went along. It sure beats trying to find that one little hidden screw on a fragile plastic panel On my bike the headlight surround was way too close to that screw underneath it. It's easy to remove the surround; unsnap that little windscreen, take out one screw at the top of the surround, and then pull it up, when it comes right off.

@frankprior3713 Жыл бұрын

I then spotted two sets of acc connectors under the rear seat; one of which is acc2 witched and much easier to get to than front Acc2. Connected my Zumo to the rear acc2 connector under rear seat and all works. Hope this helps those a bit wary of taking their KTM to bits ;-)

@fishfritz1 Жыл бұрын

Excellent well done!

@rolandjaufmann4270 2 ай бұрын

☀Thank you very much for this video. It was a pleasure help for installing my zumo.

@bigsquiddanger 8 ай бұрын

Excellent vid!

@FlamesAdventureS 8 ай бұрын

Thanks !

@dougchisholm493 5 ай бұрын

Great video! thank you!

@kevinlawton5761 Жыл бұрын

There are two more cc1 and cc2 under the passenger seat which are very accessable and easy to get 2 wire from front to back

@cpuuk 23 күн бұрын

Are these the ones used for heated seats?

@jage6126 3 ай бұрын

Super ! Does anyone know if the procedure is the same for the 2017-2020 1290s?

@vectorphaseshifter 6 ай бұрын

Nice job, but you better had run the cable behind the mask-trim!

@hatsiebatsie Жыл бұрын

Really thank for sharing I have one question and that is about the Handlebar Mount Compatible with Garmin Zumo, is it the 12mm?

@FlamesAdventureS Жыл бұрын

Yes, 12mm. The Touratech gps mounting adaptor has a 12mm tube above the display. The 12mm zumo mount clamps around.

@YarekBalear Жыл бұрын

What are the little connectors you fit to the wires to plug into the ACC2? My satnav just has small bare wires and no connectors provided.

@FlamesAdventureS Жыл бұрын

I used flat plugs , they doesn't come with the Garmin, but you can buy it in for example an elektronic store

@darkosusnjar Жыл бұрын

hello mate, can you tell me the ktm part number for damping bolts (4:19)?

@FlamesAdventureS Жыл бұрын

Hello, those damping bolts came with the Heed crash bars...it's not a KTM part....

@Maciek.C 5 ай бұрын

Hello, I am currently in the process of installing the Garmin Zumo XT and the headlight cover. Can you help me mount the upper handle of this cover, I don't know how to get to the two upper screws 🤔

@FlamesAdventureS 5 ай бұрын

Hello, you have to remove the windscreen. Then pull out the plastic triangle shaped piece above the headlight, then you should have acces to install the upper screws. Good luck and let me know how it went 🙂👍

@annickcasteleyn4506 Жыл бұрын

Ge moet toch een handige harry zijn om dat zelf te kunnen doen 👌

@gesmoltenpinkje Жыл бұрын

Flame is dan ook een handige Harry. Zijn hobby is “systeemkes” maken. 🙂

@H0gyoku Жыл бұрын

My Superduke has a usb port under the main screen ... Why would ktm not have this on the more touring version of their bike...

@Biceptic 8 ай бұрын

They have a 12v plug (straight below the big screen) which you can buy a sigaret to 2x usb convertor 😅 it would saved him so much time and literally no bolt to unscrew. I run my dashcam AND my Quadlock phone charger without any problems.

@Advcrazy 3 күн бұрын

Using acc2 means the cabling is hidden and looks neater. Plus less chance the connection get damaged by water/rain or tumbles off road. I have managed to destroy a cigarette to usb adaptor riding hard off road on my 890R. Would have left me pretty stuck if my gps was relying on it.

@cheemamuk Жыл бұрын

Forgive me, but why didn’t KTM just place the ACC connector in an accessible place, under a flap if necessary? It’s obviously a place that an owner would need to get to if fitting any aftermarket parts.😮

@cheemamuk Жыл бұрын

Great video, by the way. Thank you for explaining the process.

@FlamesAdventureS Жыл бұрын

yeah, that would save us a lot of work 🙂

@Biceptic 8 ай бұрын

@@FlamesAdventureSjust use the “sigaret” plug there are plugs with 2/3 usb ports it would have saved you so much time and unnecessary dismantling the bike.

@FlamesAdventureS 8 ай бұрын

Yes that certainly could have saved me a lot of work 🙂. But I think it's not that good when riding in the rain and now the gps always has his power without using extra cables. I didn't mind to disassemble the parts, it was some kind of winter project 😂@@Biceptic

@Biceptic 8 ай бұрын

@@FlamesAdventureS thats absolutely true my friend. Cheers 🍻