GR Corolla SXTH Element Intercooler Installation

Рет қаралды 2,151

Күн бұрын

Learn how to install the SXTH Element Front Mount Intercooler on the GR Corolla.
Chapters:
Intro 00:00
Tools 00:15
Remove OEM 00:35
Unboxing 01:55
Install New Core 02:17
Install New Hoses 03:26
Thank you for watching, and don't forget to subscribe! You can find our products at any of the links below or go to sxthelement.com for more information!
WHERE TO BUY
sxthelement.com/products/gr-c...
SOCIAL MEDIA
Instagram: sxth_element_engineering
Facebook: / sxthelement

Пікірлер: 16

@Feral80sKid 5 ай бұрын

Gotta give credit where it's due, nice product at a really good price, it works. 2023 Core, good people at SXTH too. Their prices aren't ridiculous and they are quick to respond.

@xQsalan 6 ай бұрын

I'll definitely have to buy this for houstons hot weather

@minimumwrist3546 6 ай бұрын

This must be what’s coming in the mail tomorrow

@vincentluther8794 4 ай бұрын

Spend the extra $100 and get the Racer X intercooler that’s tig welded by hand in the U.S. sixth element intercoolers are cast

@mhk67091 6 ай бұрын

Do they have protective end caps while shipping so nothing gets inside of intercooler. Update I received and it does have caps on both sides.

@Feral80sKid 5 ай бұрын

They sure do, and packaging is total overkill lol, which is nice. I had an intercooler years ago arrived smashed on hot side and took me forever to file/sand it to where the charge pipe would go on, its a nice piece and definitely makes a difference, 2023 Core here.

@mhk67091 6 ай бұрын

Does it retain the factory cooling ducts (Air deflector) to direct cold air to the intercooler.

@SXTHElementEngineering 6 ай бұрын

Yup! Look at the video and you'll see the part where we tell you to cut the OEM ones if you don't want them squished. Air reaches the core regardless of them installed or not. That is why removal is optional :)

@sreyes1103 3 ай бұрын

after installing the piping i hear a whining ish noise during acceleration. how tight should the hoses be?

@mhk67091 2 ай бұрын

Had the same problem initially that’s boost leaks you need to get a good seal you can you hairspray or silicone lube but make sure you tighten very good (lots of boost going through those pipes) I pressure tested and sprayed soapy water to find leaks. We fixed all of them now it’s perfect. I see this post is 4 weeks old did you tighten all the couplers and find all the leaks

@breaks_n_stuff4049 6 ай бұрын

Love the products… hate the fact that most of them are on pre order or back order. Can we please get these IN STOCK???

@SXTHElementEngineering 6 ай бұрын

These are the very first batch ever made of these :) But they are in stock now. Order and it will ship at the end of next week when all of the pre-order people are taken care of!

@breaks_n_stuff4049 6 ай бұрын

Got mine ordered! Thanks

@mhk67091 4 ай бұрын

Disappointed start..Installed mine today I hear a boost leak when in high amount of boost. Installed exactly per instructions install was completed by master mechanic. Hissing sound when in boost above 1.5. Im bringing back sunday..not a good start **** UPDATE FIXED had the system pressure testing found boost leaks couplers were not tight enough and now it pulls full boost pulls HARD and At a lower rpm nothing crazy but no heat soak no more.. went to full send Motorsports they fixed it in a hour. Any mods you have to ready for these things to happen. Nice upgrade

@Gr4yota 4 ай бұрын

Show a video please

@mhk67091 4 ай бұрын

Update had it pressure tested and had a few boost leak on new charge pipe from couplers not being tight enough.. fixed no more boost leak car pull hard and at lower rpm.. nice upgrade