"Grade C" Enfield No 4 Mk1 Rifles from Royal Tiger Imports Review. Can't Win Them All..Or Can You?

Рет қаралды 73,149

4 жыл бұрын

This channel depends on your support, here are several ways to do so:
Patreon: / mikeb128
Bitcoin: 173Yu7hxmPeCExhFdVhShXVt12SckfLebP
Monero:4BrL51JCc9NGQ71kWhnYoDRffsDZy7m1HUU7MRU4nUMXAHNFBEJhkTZV9HdaL4gfuNBxLPc3BeMkLGaPbF5vWtANQuQxHHHVJekU3rP6yM
Also, if you like Military Surplus gear and collectibles, visit my online store HERE: www.mikesmilitaria.com

Пікірлер: 315

@TheKoba49 4 жыл бұрын

great review I ordered some carcano rifles from them will be doing a review soon.

@MikeB128 4 жыл бұрын

Hey, good to see you're still kicking! I wouldn't get your hopes up for those rifles....Maybe just wait a little bit....If you catch my drift...

@nathanieljones7981 2 жыл бұрын

@@MikeB128 I picked up one from KY gun Co. They had a 1936 dated rifle with mint bore and in great shape! And some earlier 1901-1923 rifles that were hit or miss with rust and Being good rifles. Going back to pick up another, Really been wanting a mas 36 or Enfield, however I can't find anyone with reputable sellers of them...For a decent price

@gump071 2 жыл бұрын

I just took a risk also on gambling on RTI. I just bought a 1891 Carcano rifle in a 6.5X52 grade B with a $40.00 hand picked boar rifle. After see this review … I’m kinda worried about what I’ll find in the mail …

@Colicious89 4 жыл бұрын

I got suckered into buying one of the “Refinished“ No 4s from Classic. It was caked in dirt and had a half assed finish slapped over said dirt. Makes these seem like a bargain.

@MikeB128 4 жыл бұрын

@@TheGearhead222 If you want people to know you're "John in Texas", change your username to "John In Texas" and stop signing every fucking comment with some 2003 era E-mail signature style.......

@MikeB128 4 жыл бұрын

@@TheGearhead222 Being a vet doesn't mean I can't call out your stupid shit for being annoying.....The military is/was a job...Not a free pass to do dumb shit.

@Euan_Miller43 4 жыл бұрын

TheGearhead222 nope

@davidschaadt3460 Жыл бұрын

Ben ,how could you! I've heard so many bad things about them.

@TexasLeverGunner 4 жыл бұрын

I've read a lot of horror stories on rifles from RTI. Of course though, when you buy rifles that came from countries where you know they were rode hard and put up wet, this is to be expected I guess. I am really excited about the decent stash of Carcanos and Chassepot's and I may take the risk on both here soon. At the price, it's worth it.

@scoe5908 4 жыл бұрын

Fazakerley is about a 20 minute drive from me, weird seeing rifles made there pop all over the world

@nickmoore385 4 жыл бұрын

The Royal Ordnance Factory buildings are still there, but it's an industrial estate now. Same with Maltby in Yorkshire, which was the other main factory for them in the UK.

@flipflopsguy8868 4 жыл бұрын

That s amazing it's a very small world now I have a (F) Enfield and I hand selected it my self because it was closest to my actual birth date by ten years 4/50 and thusly not as old in better shape and at 100$it has turned out to be quite a value. Oh I'm in California USA .

@GenericShirtNinja 4 жыл бұрын

I feel the same with Long Branch Enfields and Inglis High Powers

@jayyoung5627 4 жыл бұрын

Looks like they have removed your review now. Don't hesitate to call them what they are. A scam.

@turbografx16 4 жыл бұрын

Wow. That's low.

@DrGamingDude 4 жыл бұрын

"You be the judge" is more of a Paul Harrell thing than Tim Pool.

@ryanharrell8866 4 жыл бұрын

Thanks Mike I really appreciate you doing a review of these guys. I really didn't know what to expect from these grade c rifles and this gives me somewhat of a idea.

@maganaco.7994 4 жыл бұрын

I bought a m16a1 kit from RTI they made me wait 3 weeks. Kit was very nice but they did not send me my pistol grip or the flash hider. After contacting them they told me to take a hike. Ended up buying replacement parts but they left a bad taste in my mouth.

@hoxton7946 4 жыл бұрын

Hehe, now I see why you said 'deals can be had on Enfields' in your last vid! Excellent quality video as always MIke, you're probably my favorite youtuber and you've taught me a sh*t ton!

@GarandGuy2553 4 жыл бұрын

Thanks for sharing! Unfortunately, I took a gamble on a Gew98 that turned out let so. Everything looked good except the bore and am in the process of evaluating if I should shoot it with the faint rifle that exists in the barrel. The throat is pretty much smooth bore though so am waiting for shows to start up so I can grab a barrel to swap out.

@thegungooch639 4 жыл бұрын

Love enfields, just picked up a jungle carbine, 1945 BSA minty too. All matching including the mag. Thanks for the video Mike, you're the man

@kylekohler5228 4 жыл бұрын

Great review, I got lucky with my C grade. Bought one and it is a No. 4 Mk2 made in Fazakerley, 5 groove barrel. Slight cordworn at the end. Might recrow it, the muzzle test indicated that it was barely shot. Slight rust at the end of the barrel, and a good throat. Was missing the front sight protector, extractor spring, and forend nut and bolt. I bought some of the parts, but I'll have to fabricate a nut for bolt in the forend. Damm things are impossible to find. Magazine and safety came included. The only major problem which I haven't done to much to is the bolt won't cycle properly to lock forward. It won't come close to locking forward, even with extreme pressure on it. I think it was reassembled wrongly and I lack the firing pin tool to take it apart to check. I plan on buying that tool, maybe it's a knowledge thing, this is my first and only Lee Enfield rifle I own, so I'm more clueless on this then other rifles I own.

@viking1236 4 жыл бұрын

Check the bolt head is tightened correctly as a first move.

@mkruk2 4 жыл бұрын

OOOF! Thanks for posting the follow up to that comment thread on the other video. I have seen the same issue happen to some other guy on GunBoards on his Savage Grade C. It's a shame that pretty much all of them have the finish worn down to the white. It sounds like you did the right thing of ordering more than one to guarantee that at least one is going to be acceptable to shoot, and parting out the rest.

@MikeB128 4 жыл бұрын

I wouldn't mind the finish being worn down, just really disappointed it is completely fucked.

@CheekyMonkey1776 3 жыл бұрын

Excellent review and actionable information. I was thinking about picking up a few as well. No longer. Thanks

@natsuccubus 4 жыл бұрын

RTI riding the line is a good way to put the company. Bought an M48 with a decent bore, cleaned up decent (hideous import mark but that happens), and mildly beat up with some paint on the stock that i cant read. Still fun as hell to shoot and only needed a replacement firing pin spring.

@masonmitchell4050 4 жыл бұрын

I’ve been thinking about getting one, and I’ve decided for this very reason that I’ll only buy No.4’s in person, that rail is hit or miss.

@MikeB128 4 жыл бұрын

The Rail issue, like I said in the video, is only on the No 4 MK1* rifles made by Savage and at Long Branch...

@desabc221 4 жыл бұрын

Have you checked the head space on all of them? What are the numbers on each bolt head?

@markmanwaring3823 4 жыл бұрын

The barrels will make great tent pegs , build one out of them all , put a new barrel on it mate , head spaced to the best bolt / head , try 7x55 , same pressures but a better case from the 303 rimmed shell . Love your enthusiasm .

@austinhead5415 4 жыл бұрын

I bought one of these as well. Right out of the box the bolt was 1/4” from closing and it was stuck so tight I couldn’t smack the bolt open. Also, it had an absolutely terrible smell to it. Like a dead animal. it’s a 1942 Fazarkly. Tapped the bolt out with a brass hammer and cleaned everything. I had a sporterized version before so I tried the bolt from it and it worked fine. Headspace was terrible tho. Also, the source of the smell seemed to be something brown that dried under the hand gaurd near the muzzle end of the gun. I’m not going to speculate what that was, just wiped it off with a Clorox wipe. The really cool part, was that on the left side of the gun, on the wood by the trigger gaurd it has 6 tally marks carved in it. (4 vertical with a slash and 1 more vertical) I’ve never seen this on a British gun before. It’s a cool wall hanger but that’s about it. I would consider it really dangerous to fire with the headspace the way it is. I’m not super upset by the purchase, just wish they might have specified that these cannot be made into shooters, that some of these had defects that make them unusable.

@mauricesmith3209 Жыл бұрын

.303 cartridge head space on the rim. So if the bolt snaps shut with a little pressure. You should be ok

@richardshackleford999 4 жыл бұрын

I got a mosin m44 that was in a friend's garage for free. The barrel looked like a "sewer pipe" I cleaned it with hoppes and brush on drill and got it to where I felt comfortable putting a round through it from a distance with string. Two shots cleaned the barrel to where you could see the rifling again. I was surprised how well it looked again

@MikeB128 4 жыл бұрын

I've done the same. Most of the time have had great results.

@duty5127 4 жыл бұрын

I've read the expression "with string" a few times, and I'm not quite sure what that means. Care to share?

@anglerfishtanking 4 жыл бұрын

@@duty5127 strap down the gun, tie a string to the trigger, pull it a safe distance away

@PaladinStem 4 жыл бұрын

Got one of the complete collector(not the highest priced option) grade no. 4s, it appears to have had some refurbishment or is post war (which they did said it might be) and it is great shape with a nice minty bore. You actually helped me figure out that it is most likely a Savage as it has the the US property mark on it with the same bolt removal and it even came with a ok leather sling. Only problem with it was a slightly bent sight protector which is fixable and the no. 1 mag then sent which I just mailed for exchange at their cost.

@rkeller1ify 4 жыл бұрын

Mike, wonderful video as usual; fantastic roll of the dice! I just pulled my Savage made Number 4 out of the safe. Please have a smith take a look at the bolt track. The “chip” your looking at may be the the point on a Savage where the bolt head is rotated up for removal from the rifle. It also appears that the extension of the grove forward of the space has been crushed and flattened to where the bolt head will not glide under it and instead overrides it. It may be repairable without too much cost or effort by a good Enfield/SMLE smith. Also please, please get a set of Okie head space gauges (disks) to check the headspace. Well used Enfields can be rather easily have excessive head space brought back into spec by replacing the bolt head, unless it’s already a 5. Cheers, Mate!

@MikeB128 4 жыл бұрын

That is where you rotate the bolt head on a No4 Mk1* like I said, The issue is that it's much wide due to chipping, causing the bolt head to pop out. As far as the head-space gauges, yes, I'm aware and have a Field gauge on the way.

@sandders9634 4 жыл бұрын

One I got was perfectly fine. Wood was dented up bad but serviceable, bore was mint with good throat and headspace, Finish was maybe 50% on external parts but was still like new inside the wood, and of course the biggest thing seemed to be the almost complete lack of markings. The lack of markings was almost an issue at my ffl as we had to find a "serial number" in order to transfer it to me.

@Bayan1905 2 жыл бұрын

My local gun shop has a sporterized Savage SMLE from 1942, has the simpler two aperture L sight, the front sight is still there, it's only the stock that has any issues for $400. I think I would go with them than that parts heap. From what I'm hearing of some Royal Tiger Imports lately, they're not worth the money. I've seen some pretty ragged and rough looking K98's that they're asking a fortune for but look like they were dragged down a gravel road.

@richardrobertson1331 6 ай бұрын

Your reviews are important. This one saved me time and money. Too commonly RTI seems to be over optimistic and somewhat lacking in objectivity. Thanks for posting.

@Ashcrash82 4 жыл бұрын

bought one of the M1 carbines from RTI. Got a really good arsenal upgraded early production winchester, fantastic bore. I was incredibly pleased with it. All but had my credit card out when they emailed about a memorial day sale on the top grade enfields. They weren't actually open on memorial day, so i checked the website - no mention of this sale anywhere, no way to verify it if you did order one. Called the next day, was told "sorry, that was a one day sale, nothing I can do".....I vented about it a bit on a firearms forum, lo and behold bought a clean, great bore 43 LB FTR (prior to the Mk 2 standard, so still a Mk 1*) for 400 + shipping from another member that saw my post. Patience pays off sometimes.

@ssnydess6787 2 жыл бұрын

I got lucky, bought a No 5 Mk 1 that was in in decent shape from a special they ran. The bolt was incorrect as it didn't have the correct lightening hole for it. (similarly this example does not have the correct bolt, but a lightened No. 5 Mk 1 Jungle Carbine bolt. It took about a month but I felt the company was responsive and exchanged my incorrect bolt for a correct one. That gun is amazing.

@pulldeauxduck2480 3 жыл бұрын

Like the muzzle test. And crown check used to pay 10/25 $ s for hand pick and get a fine gun.those days gone!

@briancervelli5992 4 жыл бұрын

I've been looking into getting a grade B No.4 Mk.1 from RTI for reenacting purposes. This provides some decent insight that I will take into consideration, but $350 for a rifle that should at least fire blanks seems like a pretty decent deal considering how much some people are asking for Enfields these days.

@rickyl7231 4 жыл бұрын

I just got into surplus stuff so take my input with a grain of salt as I am inexperienced. That being said I just got a B grade Number 4 in the mail from them last week. I opted to spend the extra $50 on a good bore and what I received passed the bullet test with flying colors. The rifle I have started as a Mk1 and was refurbished by the British at Fazakerley in the late 1950s and was converted to the Mk 1/2 configuration at that time. The only issue I see is a bent front sight hood wing, that is a cheap part to replace at less than $20 for a new one. Then only other issue is the bedding might be off as the downward pressure the barrel is supposed to put on the front of the stock does not seem to be there but the barrel does always go back to the same location after a bit of pressure is put on it. However I heard from the channel Bloke on the Range that some wartime rifles were factory free floated and seeing as my rifle was likely a war time production gun from the fact it started as a Mk1 it may be that it was built that way. I have not had a chance to shoot it yet but in conclusion I got an Enfield with a REALLY good bore in sound mechanical shape for less than $500. Honestly I'd roll the dice and get another one if I had the money, hopefully this helps you though!

@scooterdogg7580 4 жыл бұрын

maybe you buy the first one with the broken rail, blanks should be OK give him his $250 back worth a shot

@davidolie8392 4 жыл бұрын

About 8 years ago I bought my first Mosin-Nagant M91/30 from a different supplier, also for reenacting purposes. First time on the range I found it very difficult to extract spent rounds; turned out it has a burr in the chamber. Can't be fixed, and I suspect this was found when it was originally test-fired, because despite having a 1940 date it appears barely used, like it was put up on a shelf somewhere and forgotten. It's very pretty with its refinished stock, and it fires blanks just fine, so for my purposes I'm OK with it. But its always a crap shoot with milsurp.

@johnwaddell4107 Жыл бұрын

Get a chamber reamer, have someone do it or do it yourself

@tomj5747 4 жыл бұрын

After seeing the condition I feel like they wayyy overcharged for these, if the barrels were good with the crappy exterior that’s one thing, but with crappy bores super rough outsides and missing parts I think rti was ripping people off

@johntoner9999 4 жыл бұрын

I really learned something about the actual gun not just the about the place you bought from. Would really like to see you do a video telling the difference between each mk of Enfield.

@MikeB128 4 жыл бұрын

Eh, I don't have all the models so I can't make that vid.

@sharpcookie791 4 жыл бұрын

I guess I got lucky, I got one of these and it was in great shape, besides a few missing parts. The bore on mine has very strong rifling and the stock is great. The functioning issues that it had were fixed by just taking everything all the way apart and cleaning it really thoroughly. I did buy the rifle before the B-grade ones were listed on their website, so I wonder if RTI reclassified a lot of the better condition C-grades into B-grade

@luissantiago5163 4 жыл бұрын

This will make for a nice watch. Nice

@kaveman9 4 жыл бұрын

I remember buying 5- and 10-gun lots from CAI, SOG and I/O for $10-20 each and being really pissed at what they sent,.....but I never got anything THAT bad.

@ringingsteel8729 4 жыл бұрын

Feel like I learned a few things about inspecting milsurps.

@mattproctor3113 4 жыл бұрын

I bought a m1 carbine, carcano and a c grade enfield. Enfield turned out to be no 4 mk 1/3 only thing wrong was bolt missing parts. But I noticed several reviews taking down across several rifles are were negative reviews

@jeepman19 4 жыл бұрын

Matt Proctor how was the carbine? I looked at them, but decided against it after reading reviews

@tingley428 4 жыл бұрын

the patina on these looks super cool, if they ran 100% I'd want one

@CRCollector 4 жыл бұрын

Thanks for posting this. The bolt guns from RTI have all been less than impressive based on videos and pictures I have seen. I don't agree with review censoring either, if you don't want peoples opinion on your page don't ask for reviews. I have bought a few things from RTI, and reviewed the M1 Carbine on my channel.

@sovietstarfishproductions5019 4 жыл бұрын

wish I could've gotten one, the No.4 Mk.1 is on my list of rifles to collect

@mitchd5118 4 жыл бұрын

@Kasey Turchin same

@Igneoused 4 жыл бұрын

Soviet Starfish Productions I bought one of the “grade A” or whatever the $479 one was listed as. Mine was dirty, with a lot of wear, and it was out of headspace. But overall functional. I don’t regret the purchase, but unless you are interested in the story of how these rifles came to the US, I’d recommend getting one from elsewhere. Their AK kits however, were in fantastic shape.

@Igneoused 4 жыл бұрын

RONNIE HERNANDEZ thank you, where I’m living now I have data caps so I’m not really able to record and upload like I wanted to. Didn’t think many people liked my videos anyway. Thank you for the encouragement, I’ll make more when I can.

@huntermurphy2148 4 жыл бұрын

You can find them commonly at gun shows. I got an amazing condition No4 longbranch from a show in Charlotte NC this year. Favorite by far.

@scooterdogg7580 4 жыл бұрын

lots in Canada , fair amount of k98s as well try gunpost

@ponchostevo 4 жыл бұрын

The second one you showed us is almost identical to the one I bought from them. I don't like to take these out of there stocks but it needed cleaned badly and found, like yours, it has a band or "ring" just under the forward band (behind the front sight). When out of the stock it was easy to see that the barrel is indeed bulged and explained the temporary loose feeling while punching out the bore. Perhaps it was fired with a bore obstruction and interestingly, my bolt is jacked up like yours. My firing pin and cocking piece are not mating tightly and allowing itself to jump out of the bolt notches. I wonder if it had anything to do with the trauma of firing with a bore obstruction???

@MikeB128 4 жыл бұрын

I just took it out of the stock, and yep, same thing. Not as pronounced, but definitely there and easy to feel. I'm guessing it was either a bore obstruction, or it got dirt in it, was stored right side up, and water rested in it, creating a rusty spot, then was fired and bulged. Either way, unsafe for live rounds. I may just sell it as a blank firing gun at cost to a reenactor. As long as I don't lose much on this, I am fine, but man, lesson learned and I hope others take heed of what RTI is dealing.

@AbananaPEEl 3 жыл бұрын

I got a lebel from the same shipments, and while they're stated as being grade B which is different than your grade C obvi, it was in better shape than i had expected

@tulatoiletandsepticllc81 4 жыл бұрын

I have to agree these are grade 5/d~f parts guns. Not grade c/maybe shooters. In today's Milsurp market, with less and less available, I see these type of rifles getting bumped up a grade or 2. I have a nice Savage no4 mk1 * that has a flip sight. I have played with idea of changing it out for a milled type. But it is such a nice rifle I can't bring myself to modify it. I probably should do a video on it. On the other hand I got ahold of a bunch of milsurp 303 ammo. All with 41~45 head stamps. Holy hang fire Batman! Display use only. Got a 1/2 case of the stuff. LoL

@thatguyoverthere9634 4 жыл бұрын

What your asking about around 17:50 That would be the trigger sear catching the rear locking lug, I was scammed into a rifle that had that issue "fixed" with JB weld. Sold it because I didnt want to deal with a gun that had damage to the reciever since that is what causes it. Not unsafe just super annoying.

@sethcooper5067 4 жыл бұрын

I'm tempted to pick up an M1 Carbine from them. Any thoughts?

@patrickholub9698 2 жыл бұрын

I’m glad I live 10 minutes away from a FFL that emphasizes C&R firearms. There are a lot of better deals price wise online but being able to put my hands on the firearms is comforting to me. Just got a Yugo SKS that looks unissued (definitely not an expert but I’m comparing to other examples I’ve seen before.) I sold a lot of what I brought back to CA before I moved to VA with the mind set I would buy “modern” firearms since I was leaving a ban state. Now of course I’m regretting it. Although I’m glad I sold everything to my two best friends so I can still shoot them when ever I visit San Diego but now I want to restart my C&R collection since I got my fill on ARs/AKs etc.

@George-tz1cv Жыл бұрын

Sometimes, a bore that fails the ‘Bullet Test’ will shoot pretty good if hand loads using .312-.313” bullets. Oversized cast bullets are often a great option. Most mil spec or mil surplus ammo runs a .310” bullet.

@tfusilier44 2 жыл бұрын

Seems like some decent parts at least. At 18:29 you can see that No 4 has a No 5 trigger guard which actually worth alot more.

@snowflakemelter1172 4 жыл бұрын

Put a copper strip in the bolt guide groove and built it back up with TIG weld, the copper won't weld and the groove won't have to be re cut.

@MikeB128 4 жыл бұрын

Not everybody has a fucking TIG welder laying around, and the know-how to do it..........

@jarodcrazyindian 4 ай бұрын

@@MikeB128😂😂😂

@aretardridesmotard6128 4 жыл бұрын

Oh my! im open to the idea that living in a commonwealth country (aus), I may have it over the Americans for once. Theres a surprising number of these kicking around, in really lovely condition. Two of them in my safe ;)

@jerryjohnson5545 4 жыл бұрын

Can you make a video shooting these? I’m really interested in seeing the grease cloud.

@MikeB128 4 жыл бұрын

Yes......eventually...

@paulkindler8430 4 жыл бұрын

I might buy one if they sold them as a partsgun at a lot cheaper price but not at their price. I would buy a set of headspace gauges and slug the barrels, One good thing about Enfields is the bolthead being made in different sizes for headspace.. I also like the different length of the butt-stock that can be change to fit a person better than one size fits all.

@sevenpointsixtwo9707 2 жыл бұрын

I just pulled the trigger on a No. 1 Mk iii from RTI. I REALLY hate buying a firearm (especially old MilSurp) sight unseen. I’m fully expecting a wall hanger.

@MNDood2122 3 жыл бұрын

If you want to part out that savage I need the fore end and all the hand gaurd stuff. Trying to restore mine. Let me know.

@brustar5152 Жыл бұрын

Rifle number 1 is salvageable by carefully build-up welding the broken track area and then slit saw mill a new groove along with end milling a new gap for the bolt groove follower - common repair done for years with machining steps duplicating the way the thing was machined during initial mfg . Done carefully, you'd never know it was repaired.

@stutterz45 4 жыл бұрын

I got kinda thirsty to buy a no4 mk1, so I got a sportized one for around 350 and it was kinda rough around the edges. And it was worth it because it’s so damn accurate it’s ridiculous, bullet test passed with flying colors I think I honestly just got lucky

@JerryEricsson 4 жыл бұрын

Years ago, I was in the gun business on the side working gun shows when I could make them. One day on Shotgun news I saw a Chinese import 3 BOLO mauser pistols in rough shape for 60 bucks. So I ordered them in thinking perhaps I could make one of the 3. I did, I managed to build on Mauser broomhandle BOLO out of the 3. None of them hand much for rifling and there was no way in hell I was going to shoot the one I built. I did polish her up and blue her in our hot bluing bath on our next bluing day (I worked with 2 other gunsmiths in a large facility at the time part time when I had days off on the PD) I took all the parts and the gun to the next gun show and everything sold, back then I thought I made good bucks, got 200 out of the mostly complete gun (missing grips) and 100 out of the other 2 parts missing guns. I guess in deals like that, you pays your money and you takes your chances.

@MikeB128 4 жыл бұрын

Congrats..

@Skeeter51244 4 жыл бұрын

Would reboring to 8MM BSA or even .338/303 be an option for someone who seriously wants to shoot one with a bad barrel?

@olveroliver52 4 жыл бұрын

Was considering getting an m48 from them but now not so much

@mauricesmith3209 Жыл бұрын

Hi. Many of the rifles made in the U.S. Had a gap in the rail like your 1st example. This is to facilitate the removal of the bolt.

@MikeB128 Жыл бұрын

HURR DURRRR no way.... DId I not explicitly say the gap was broken and fucked and makes it so the bolt face won't engage it?

@micmacpole Жыл бұрын

I rolled the dice on 2 Carcano carbines but have not received them yet. I am hoping one of the two will be a shooter. I already have a 1916 Carcano long rifle that is in need of a good bolt which is otherwise really nice. Only time will tell how my luck of the draw will turns out?

@calvingreene90 4 жыл бұрын

They were better than I expected given the description and that they were discarded into a warehouse by Ethiopia.

@jacoblarsen3336 4 жыл бұрын

I'd be interested in buying the rear sight off that savage rifle if you want to part with it. Let me know if you want to get rid of it. Thanks

@clancywoodard310 4 жыл бұрын

At a antique store a year ago I came across a No 4 Mk 1 and they said it was one that was used by the us military did the British government send us any lee Enfields

@sharpcookie791 4 жыл бұрын

No, the US made rifles and sent them to Britain. They had US Property stamped on the receivers, but the US never used them.

@allangibson8494 4 жыл бұрын

Lend Lease required that the equipment made in the US be marked "US Property" and returned or paid for after WW2. The UK finished paying the WW2 loans in December 2006. Russia paid 10c on the dollar after defaulting.

@maverickpaladin4155 4 жыл бұрын

Who made rifles 3, 4, and 5? Also, were any of the Enfields counterbored, or was that just a Mosin thing? Thanks for the video.

@thepoorhunter2004 4 жыл бұрын

I’ve had No1 MkIII’s made by Lithgow that had been counterbored. Both WWI dates of manufacture.

@thriftshopsspiritstops9951 4 жыл бұрын

Mike, you’ve been showing the bullet test a lot. My question is how do you do the bullet test on a firearm with a permanently affixed muzzle device such as a grenade spigot on a yugo m59/66 sks rifle?

@MikeB128 4 жыл бұрын

You don't..Have to get a gauge or remove the muzzle device...

@Heingar 4 жыл бұрын

I know they have a disclaimer on their site, but I really think you have a legitimate grievance with the Savage. They're specifically listing them as project rifles and as you said the fundamental integrity of the receiver is gone. At this point it is questionable if it even can be described as a project rifle. Seems as though they didn't inspect them at all, or even worse didn't care.

@Darious-_Milsurp_Mark 4 жыл бұрын

I got 12 of the Sarco NO 4 specials for 29 each a few months back, no safetys, mags or bolts. 9 of 12 useable ,B grade.all. 7 Savages, 4 Long Branch and 1 Frenzy. All for 525 with shipping. So with another 500 in parts the Sarco was a good deal, Lots of rust and days of beadblasting saved them all, I m doing old fashion rust bluing to them. Buyer beware, 2 of those I have were plugged with lead. Mike, Thanks for the heads up, I thought about getting 2 but maybe not now with RTI

@timblack6422 Жыл бұрын

Check the bolt handle on that last one - early/experimental. It’s hollow on the ball

@64samsky 4 жыл бұрын

I love old guns, they have a lot of character.

@MikeB128 4 жыл бұрын

Yep. If I can eventually get 4/5 to shoot well and safely, I won't be as disappointed. Still going to be a lot of work but hey, gives me something to do right?

@ethandertz1160 4 жыл бұрын

I have a 1942 production Long Branch Mk1*. I thought mine was worn down until I saw these

@malasuertexch13 4 жыл бұрын

Hey Mike, I just recently bought an M48, but it has a pretty dark bore. What do you recommend I use to clean the bore up? I’ve looked up shit, but I trust your judgement before some random comment.

@victorboucher675 4 жыл бұрын

Random ... Flitz and elbow grease. #2 Fire lap the bore. #3 White vinegar (cleaning grade).

@darrinclem2502 4 жыл бұрын

I have a no4 mk2 that I sporterized about 30 years ago for hunting. I would like to put back to all military. I'll buy the wood from you if it's for sale

@mattm.3562 3 жыл бұрын

You can find no2mk2 wood from liberty tree collectors

@capone5 4 ай бұрын

They recently had these for 199. Made a video about it. It's not a prize pig but its decent for a range trip if you don't care about tight groupings.

@MikeB128 4 ай бұрын

I was more concerned about catastrophic failures, as I made another video about when I brought these out to the range.....

@andrewrichison813 4 жыл бұрын

A few weeks back I ordered a Romania AK47 B grade parts kit, I was very disappointed, the parts were in a thin bag and throwin in a shipping box. The parts are worn down to bare metal nothing matched and it came with a Bulgarian but stock. I feel the grade of the parts kit is misleading because the parts kit is a gunsmith special. Was my first time ordering from RTI and it's my last. So buyers be ware.

@CondavourTalksGuns 9 ай бұрын

Idk if you have parted the rifle out, but if you do i need a walnut fore-end like that :D

@thechurch5000 3 жыл бұрын

Mike I bought an Enfield No.4 back in 1990 for $99. They were essentially unused just had a ton of cosmoline all over it. I sold all of my curio and relics about five years ago and am sick I didn't keep a few. Other than a few vendors I would say the hobby is pretty dead like I saw you comment in a previous video. Good luck I would get anything you deem shootable checked by a gunsmith.

@rileyfarrell180 4 жыл бұрын

Ik u pry dont usually use head space gages and stuff but if i were you id defintly check those before u shoot up to u tho

@FallenUA23 4 жыл бұрын

sorry for dum question, but could you take parts from each rifle and build something that is just ok?

@sovietstarfishproductions5019 4 жыл бұрын

Artem Boiko you can but it could cause problems like head spacing being out of place

@sovietstarfishproductions5019 4 жыл бұрын

Which is why most of the time you’d just have it completely refurbished at an Arsenal

@DHeav60 4 жыл бұрын

@MikeB I noticed RTI had some higher grade Enfields for $350-500. I don’t know a ton about all the variants but I definitely want an Enfield. Do you think those higher grades from RTI are a fair price?

@DavidWRankinJr 4 жыл бұрын

Number One Son went to RTI's website without asking and bought me a Grade A No 4 Mk 1. It came full of dirt, crap, and filth. It's also a No. 4 Mk 2 with practically no markings other than the serial numbers. For its condition and the fact they didn't pay attention to what it is, I think $250 would be a high price, much less the $480 he paid. And read the fine print: they don't guarantee ANY barrel condition, even with hand selecting, so you could spend $600 or more and still get a wall hanger. (To be fair, I've had to clean a lot of powder and copper out of my barrel, but the grooves look excellent. I would think it was a newer barrel if I hadn't just had to foam it 5 times and use 2 cotton fields worth of patches cleaning it....) I can't even say that I had a good experience, because I'm still not yet certain I haven't gotten Khyber Pass'ed. Even if I didn't, and I've gotten lucky, I'd recommend finding one I could inspect by hand.

@ghalmarraz8706 4 жыл бұрын

Let me get the furniture and hardware from that Savage

@Gregiorp 4 жыл бұрын

I've been wanting to get one of the Gew 88 from RTI. I would more than likely never shoot it but worry about get a piece of garbage cosmetically.

@sharpcookie791 4 жыл бұрын

I got one of the carbines and the bore is trashed, but other than that it was in good shape, at least for its age.

@franciszeklatinik889 4 жыл бұрын

@@sharpcookie791 Well, it is at least great for a wall hanger.

@Hjerte_Verke Жыл бұрын

These look like a lot of fun. I've never run into an Enfield that I would touch as far as totally refinishing it, at least until now. These could use a blue or phosphate finish topped with the cheapest semi gloss black rattle can paint one could find. They are overpriced junk, but RTI can charge a lot of money for these because they don't grow on trees (not anymore). Unless we find some other country that has these in warehouses and willing to sell to U.S. Importers, these look like the end of the line.

@bradmason5204 2 жыл бұрын

The mk 1* needs a different bolt, one w/fwd. and trailing edges of the groove beveled. You can also use a jewelers file..

@MikeB128 2 жыл бұрын

Did you miss the part where the rail is completely fucked so it doesn't matter?

@bradmason5204 2 жыл бұрын

@@MikeB128 The rail can be dressed. Others have repaired this same problem...rainy day project.

@timboyle3114 4 жыл бұрын

sounds like these guys are about as trustworthy as sweaty ben! Been looking for an Enfield for a while, but IMHO will be waiting till I can inspect something in person.

@MikeB128 4 жыл бұрын

Well them and sweaty Ben are old friends, so it doesn't surprise me.

@leutnantale2914 4 жыл бұрын

I am debating if I should gamble by getting a M48 Yugo Mauser from RTI. I’ll probably wait just incase I find any deals elsewhere.

@natsuccubus 4 жыл бұрын

I have one from rti and it shoots cheap ammo decently and had mismatch bolt. They are cheap at least. If you order from them get a new spring

@ThePrybra07 4 жыл бұрын

I was going to pick up one of them from classic firearms but I waited too long and they sold out. I started considering the rti ones but waited and a weeks later classic got another shipment. I picked one up and the extractor spring broke and it needs a new trigger spring.

@MikeB128 4 жыл бұрын

Dude, watch more of my content, and others' content......Classic Bought all that shit from these guys, and they overstate more than RTI does......

@ThePrybra07 4 жыл бұрын

@@MikeB128 yeah I also forgot to mention the stock had a pretty fresh chunk taken out... They got the best of me. I've been wanting to add a lee to my line up and jumped before really thinking about it. It was 500$ too

@generaluriah9569 11 ай бұрын

I've seen too many bad reviews about Royal Tiger products. THANKS!

@notafed6817 2 жыл бұрын

I had no idea the u.s made any of these. I'd be cool to get some cheap ones to rebfurbish but I have no idea where to start lol

@caseyhardy9327 4 жыл бұрын

Could use your savage ladder site

@thomasdonnelly2642 4 жыл бұрын

I got a carcano coming today from them, I dont know what I'm in for 😬

@mkruk2 4 жыл бұрын

As long as your expectations are low, I think you will be alright.

@thomasdonnelly2642 4 жыл бұрын

Well the verdict in, I pulled it out of the box and I was like hell yeah it's in decent condition. Then I looked down the bore. It was literally a smooth bore. Never buying something from them again

@Apolloneek 4 жыл бұрын

@@thomasdonnelly2642 damm and I was excited to get one

@thomasdonnelly2642 4 жыл бұрын

@@Apolloneek did yours come in yet?

@missilpeludo8813 4 жыл бұрын

I got one model m38 last Friday and was in really good shape

@lauriewatkins8522 3 жыл бұрын

Your last rifle with the sticky bolt appears to me to have a slight twist in the action, if any one in Australia offered any Milsurp like any of those rifles they would be closed down and charged by our Consumers protection people, selling fire arms here is very hard and any like those are just not on at all, most of our .303's are Australian Lithgow manufacture with others made by BSA, Enfield and any No 4's are usually Longbranch manufacture, all are safe to shoot or they are sold as spare parts, my own is a No5 manufactured in 1946 at the Fazackerly factory and as tight as the day it was made, I have notice a few that have the markings ROF which is the Royal Ordinance Factory which are in all likelyhood made in India, the only ones here have been converted to .308 by the Indian factories and don't sell well at all

@28CarsLater 4 жыл бұрын

I just ordered the last K98 from RTI, they are shut down right now so I probably won't be seeing it till August. This video has be concerned but it wasn't marked as shooter grade or some such so I guess I'll see.

@AngryPandaMania 4 жыл бұрын

"I sound like Tim Pool" 😂

@fritzedelwei3133 4 жыл бұрын

I wish i could buy those in germany

@TheMosinCrate 4 жыл бұрын

Oh... Okay. I see how it is. "No I've done videos like that before." "You sure? It could be a good video, people would enjoy it." One week later here it is. You SOB.

@MikeB128 4 жыл бұрын

Don't you have a goat somewhere to violate? Stop trolling, sir. God bless.

@desabc221 4 жыл бұрын

Please explain what this is about?

@williambinions4205 4 жыл бұрын

Ouch

@HircineDaWolf 4 жыл бұрын

@@MikeB128 sounds like he was just joking and about to release a similar video lol

@giuseppe4909 Жыл бұрын

I’ve looked at items from RTI, but I always thought their arms were sketchy at best based on the things I’ve seen and heard.

@roberthill3207 4 жыл бұрын

Sweet tanks

@aliasthej660 2 жыл бұрын

What are your thoughts on the B-grade rifles?

@MikeB128 2 жыл бұрын

Feel free to waste your money. I will never recommend them to anyone.

@joedemp27 4 жыл бұрын

Why not rebore to .410 the ones your not sure off

@fdsdh1 4 жыл бұрын

I wonder where these things were stored, I'd guess outside!

@hobofactory 4 жыл бұрын

Here’s a clip that shows the conditions they were stored in, the “goat barn” reference wasn’t an exaggeration for comedic effect on Mike’s part: kzfaq.info/get/bejne/oZmli8t9sruqlYE.html

@fdsdh1 4 жыл бұрын

@@hobofactory ha omg, that explains a lot!