grandMA2: The Definitive MIDI guide part 5: MIDI Encoders with RD/ShowCockpit

Рет қаралды 10,336

6 жыл бұрын

Alex goes thru MIDI encoder setup using RD/ShowCockpit
Links to downloads:
showcockpit.com
Our website: consoletraining.com
Our Patreon: / consoletraining
Our Second Channel: goo.gl/t35LA2
Our Facebook: / consoletraining

Пікірлер: 23

@ATsuranov 6 жыл бұрын

Hello! interesting syntax for numpad and command buttons. I try make numpad, but nothing have no results

@kasastorurre3941 5 жыл бұрын

So if wanted to use for dot and Behringer x-touch

@danrijos4676 6 жыл бұрын

This is a game changer. Thanks

@danrijos4676 6 жыл бұрын

If you want to use multible midi devices do you recommend this with bomes midi?

@ConsoleTraining 6 жыл бұрын

This doesn’t require bome :)

@harunkucuk6756 6 ай бұрын

How does it happen that akai apc mini and korg nano control two devices conflict?

@alecmolinaro5342 4 жыл бұрын

Can you edit or change LED feedback with the Generic Midi element???

@loicchoquer3012 2 жыл бұрын

Hi. How is it possible to sync all Pages on MA with the same fader (APC mini?)

@michaelduggan3031 4 ай бұрын

If I have serious lag on encoders what would be the cause?

@user-mk5ew6yc6t 5 жыл бұрын

Does it also work with dot2 onPC?

@christophheyder4467 4 жыл бұрын

Hi Alex, great video, thank you! You say the buttons can be used to control normal/fine/ultra. How does this work?

@TradeMarcTM 3 жыл бұрын

Did you ever figure this out? Trying to find the same out for myself

@HugoFranco 6 жыл бұрын

Hello, nice tutorial! Wich MA version have you used?

@ConsoleTraining 6 жыл бұрын

MA2 v3.3.4.3

@HugoFranco 6 жыл бұрын

Thanks, I was trying to connect it to 3.3.2.2 and iI couldn't manage to make them work together! Thanks!

@danrijos4676 6 жыл бұрын

So if I wanted to use a midicon2 and tracktor F1 should I buy 2 generic drivers and the ma2 driver?

@ConsoleTraining 6 жыл бұрын

I believe you only need one generic driver and MA driver

@RicardoDiasPT 6 жыл бұрын

You can use more than one Generic Driver. The MIDICON2 is now officially supported, so you can also opt for the special driver for the MIDICON 2.

@blessingndumiso2726 6 жыл бұрын

Hi Alex, mapped an MPD218 using your method. I can on get 2 clicks/values on the encoders, for example if pan value is 0 i can only get it to 2.1 and vice versa no matter how long i turn the knob. Any solution to this? What are your settings on the MPD software?

@garyzhang7395 5 жыл бұрын

Tell me you a email，i send u.

@garyzhang7395 5 жыл бұрын

Mpd software

@harunkucuk6756 6 ай бұрын

Akai apc mini software settings ? What ate your