grandMA3 | MA Tips [EN] | MA Startshow for Phasers

Рет қаралды 6,071

Күн бұрын

With grandMA3 software v1.9 comes a great improvement in our MA Startshow. Have a look at the new Phaser Layouts!
►Free grandMA3 onPC Software: www.malighting.com/grandMA3-S...
►MA Lighting: malighting.com
►MA University: malighting.com/ma-university
►Online Manuals: malighting.com/online-manuals
►Community: malighting.com/community
►Get in Touch with us: malighting.com/get-in-touch-wi...
Social Media Channels:
►Facebook: / malightingint
►Instagram: / ma_lighting_international
►Twitter: / malighting
►LinkedIn: / ma-lighting-internatio...

Пікірлер: 26

@techtim123 Жыл бұрын

Thank you 🙏🏾💡⚡

@felixaudinos3954 8 ай бұрын

Hello can you make a macro to implement this new show file in our show that and older this allows us to be able to work correctly with the new output that you have integrated ?

@kasparssprogis553 Жыл бұрын

So the phasers all worked perfect until I pressed in Group select (-) symbol. And now that line dont work anyhmore. How can I reset that? And what actually "group select" section do?

@matthewkeir3443 Жыл бұрын

same problem

@matthewkeir3443 Жыл бұрын

I actually found the solution. You have to go to the group pool and save your fixtures into the additional "start show group 1-6" groups. The Group select switches between the "Start show group X grid" and "Start show group X" groups, although the switching back to the first group doesn´t seem to work so you get stuck in an empty group when you don´t have anything saved in the second one

@kasparssprogis553 Жыл бұрын

@@matthewkeir3443 This Fixed the problem. Thanks!

@matthewkeir3443 Жыл бұрын

You're welcome. I still don't understand the purpose of the 2 groups though... if anyone knows, please enlighten me!

@zoltannemeth1697 Жыл бұрын

Thank you for this show. It's really a big help. I use it too. I have so many problems with it that it doesn't work with the color phaser, only the LED lamp, which has a traditional color dial, doesn't do anything.

@MALightingInt Жыл бұрын

Thanks a lot for your feedback. Think it depends on the fixture type - could you try to merge the color wheel information manually to the presets? Then it should work.

@highhorizon Жыл бұрын

Oh ihr kommt aus Deutschland ? Setzt ihr auch bei defqon1 1 eure Technik ein? Gibt es da auch was für den Homebereich ?

@MALightingInt Жыл бұрын

Ja, beim Defqon 1 sind auch grandMA3 Systeme im Einsatz. Unsere Lichtsteuerungen sind zuerst mal für den professionellen Gebrauch im Entertainment Bereich gedacht. Natürlich gibt es aber auch kleinere Geräte, die insbesondere beim Vorbereiten und Visualisieren von Shows von zu Hause aus helfen. Schau mal hier: www.malighting.com/product/grandma3-viz-key-4023576/

@lo_gro 3 ай бұрын

Are there any plans to release an updated Startshow file now that 2.0 is released?

@MALightingInt Ай бұрын

Yes there are some updates with v2.0 already, for example the structure of macros and extended LOS area. But we are also working on some new things for the next versions.

@nikhilhodam6454 5 ай бұрын

How to use los

@aggiebilly99 Жыл бұрын

Is there a way to get the Phaser layouts added to an already built show or can you only have them when loading the "startshow"?

@MALightingInt Жыл бұрын

In general this is possible. The layout is based on sequences. You have to export and import them first in your show and afterwards you can export and import the layouts. Please be careful - importing the objects with dependencies might overwrite some of your existing data for presets etc....so please test it and see how it works for you. If you have questions your local support will be happy to help.

@piminat0r 2 ай бұрын

Is there any way to add a speed master? Everytime i tried it get kicked out when a new phaser gets selected

@MALightingInt Ай бұрын

Hey! Hm that sounds strange - could you get in contact with your local MA distributor? Then we can have a look at this issue directly.

@piminat0r Ай бұрын

@@MALightingInt i was the one messing up.. figured out my mistake thanks for the response

@larzkemper Жыл бұрын

How to import the startshow in a existing show?

@MALightingInt Жыл бұрын

The easiest way is of course to start with this MA Startshow and build up your show based on this. But you can also have a look at the Import/Export menu to export layouts and sequences and import them in your showfile.

@Rrrrbbbbbbb 10 ай бұрын

How control this with fader in context ?

@MALightingInt 9 ай бұрын

Thanks a lot for your question. Can you explain a bit more what you want to control with a fader in this case? Thanks for your feedback.

@Rrrrbbbbbbb 9 ай бұрын

@@MALightingInt I found it, just assign the group to a fader haha I still have another question: can I add several other groups? 7..8.. If so how to do it... copy paste an old group? I think a little video on this point could help a lot of people! THANKS :)

@goun80 Жыл бұрын

Top, but I have been using this function for 1 month, it is impossible to make the colour phraser work, I use Martin Mac aura and robe pointe.

@MALightingInt Жыл бұрын

Could you send your file to your local support? For the Mac Auras we can see no problem here, the Pointe might need a merge in the color presets with the color wheel information. Hope that helps.