Granite Miter Clamp System Push N Glue by Weha
Рет қаралды 28,096
9 жыл бұрынwww.wehausa.com/Stone-Miter-Cl...
The Weha 45 Degree Push and Glue System is a truly fast, simple, and accurate way to create 45 degree laminations.
Cut your 45 degree pieces.
lay 1 piece across the bottom of the Push and Glue green base.
Place the other 45 degree piece against the Push in Glue Backstop.
With the clamps provided, dry fit the 2 angle pieces, align them up to create a perfect fit. Then clamp the stone against the Backstop.
Now, simply slide the backstop away from the base piece.
Apply the glue.
Push the stone against the base and hand tighten the screw to create a very tight seam.
Weha USA
www.wehausa.com
704-940-0115
@FEETERPLAYS 3 ай бұрын
Where I work we just use strong yellow painters tape and supports on the bottom so it doesn’t fall while the glue dry
@matzvanz 5 жыл бұрын
Where to buy
@Z-add 4 жыл бұрын
Link no longer works
@dixx_dixx8128 5 жыл бұрын
Aqui no Brasil leão estraga isso tudo em duas horas kkkkk
@georgegs48 Ай бұрын
hat technique is very slow. I can help you with your product to make it more useful.
Abaco Karen
Рет қаралды 35 М.
Nikita Zdradovskiy
Рет қаралды 6 МЛН
Granite By Jay
Рет қаралды 90 М.
AccuGlide Saws
Рет қаралды 1,2 МЛН