If you want to see where the tiles go, try photographing the field with a drone a day or so after a good rain. Ground over the tiles should dry out first showing the tile lines. I used to know a guy who did this as a service to farmers in Illinois many years ago. You will probably need to get the drone up pretty high to see it.

For a minute I thought the little kid was driving the fork lift when you where getting seed

Very nice! We plan on starting field work later this week

Looks like it could use a new fuel tank, if the old one is rusty, it’ll be hard ro keep it from flaking

It’s Bandit!! Ohhh ummmm errrrr an Ben. 😂😂😂

I love that you and your brother do this together me and my two younger brothers plan to work together when we are older and share all our equipment and businesses like you guys do. You and Spencer are an absolute inspiration to me and my brothers and I'm only 14 but I plan to be just like you guys one day. I have watched all 3 of your guys channels for the past 2 years and I am going to watch them forever

Tile problems/questions, you gotta called Randy the master pipe layer. Great video btw, field work is always exciting cause spring is here.

Thanks for the amazing videos keep them up!

So excited for cultivating on my dad's farm. Keep up the good work

Thanks for being the best you tuber and the best former

And so it begins. Happy planting season!

The farm is evaluating like crazy good work

For the algorithm. Likes, comments, shares, and subscriptions help your content creators more than you realize. Keep it up Grant!

Keep the good videos coming

amazing videos Grant keep them come 👍👍👍

always fill your diesel tanks at the end of the day. it will prevent condensation and rust. when a hot tractor with a half empty tank of fuel cools in the evening it causes lots of moisture to build in the tank and rots them out. keep em full after use and youll have little to no issues with rusty tanks in the future

Great guys and hardworking!

Great job 👍 keep up the good work

When it’s that wet the compaction you do will usually do more harm than good but awesome video. A good test to see if the ground is too wet is digging about 6 inches down and seeing if the top 2-4will crumble easy. If it crumbles your ready but if it clumps like it did clearly here it’s too wet

Hello hopefully this will be a good year. And keep these good videos up.

Ben’s videos are really awesome!

Another great video, thanks for posting 👍

Looking good. Happy Easter

We have used a Landoll VT on an 8410 for maybe the past decade at this point. Such a nostalgic pair for me. The tractor just doesn't have the power in wet conditions for that size as you found. Throw our 8360R on it and walk some acres when needed.

We have the same disc and I’ve been running it on cornstalks all fall and I would recommend slowing down a little because it’s a little wet.

keep up the good work and good luck with planting

I run 6 Link belt excavators 330, 460, and 800 all with Isuzu's . The problem you have costs 89 cents to fix, You have a BANJO fitting connected to a rubber fuel line at the lift pump. Loosen the fitting with a 19mm wrench remove the clamp that holds the rubber fuel line onto the BANJO fitting . Inside the bolt that goes thru the banjo fitting is a plastic rock screen with a very small flat screw driver ,use a counter clock wise motion ,remove the rock screen it should be white in color , I will bet Dollars to Doughnuts it is plugged with crap from the tank . Caution there are copper washers on the bolt that has the rock screen in side it ,don't loose them or that fitting will suck air when you reinstall .This screen is on the supply side fuel line from the tank. Actually you can clean and reuse the screen ,saving you 89 cents.

Love the video grant. Keep up the great work!!

Your Farm is looking nice. keep up the great work bud.

U should run that vt over the ripped ground once then go back over before planting with the cultivator

Good job space.

Love the videos

Great work

Great vedieo grant you and Spencer is really make it look good

Great vid keep up the great work god bless. Happy easter.

Good stuff

I’ve been waiting for this! 😆

hey grant in europe we run mulchers on the bottom of the combine headers to help get the stalks to break up maybe thats something to consider for your farm too

You go keep up the good work

A vt tool loves speed and they work the best when you go at an angle from how the corn was planted

Love it!!

I love your vids!!😊

Yall might look at getting a filter screen that'll fit in the neck of the link belts fuel tank. It'll help catch any debris or particles that might be in the fuel or tank or whatever your using to put fuel in it.

Your doing amazing work keep rock man

A vt is a good Implement I’ve been running a 47 foot for four years now and it does a very very nice job and i would like to say on the Excavator those grease zerk if they dont take grease I would recommend a Milwaukee grease gun those things grease just about anything

You should put a chrome stack on your 8110, I have one I put on mine, I got it from shoup, definitely helps on the smiles per acre!

you guys did a good job getting rid of those trees and brush

Ben is the Tile KING

Congratulations Grant and Spencer best of luck Hello Ben Molly Wayne

Love the video keep it up continent

We have a landoll 49 ft and I love it I run in fall and spring

Great video grant

I have a 30' one ,If the mude on the tire really big It will leave humps in the field ,when you drive on the 2nd pass you can feel the hump

If you ever get a ripper I would recommend somthing like a landoll 2110 our has straight disc's in the front and 11 shanks in the back has worked great for us.

Probably to late by now but you can change the controls on escavators usually there’s a valve sometimes under the floor mat but could be elsewhere that you flip and it will switch how they work.

Nice Videos👌

nice we started ripping on sunday the 24th, also you should put a tuner on your 8110, we have tuner on our 8100 and it works great you can turn it up anywhere from 225 to 275 hp I wouldn't recommend running that thing on the 275 setting all the time because it would make it run pretty hot.

I laughed out loud “box of bitcoins” 😂

Hi grant I would recommend root slicing and hilling of you corn then you can get rid of a lot of the trash with a harrow

Well I guess you can come and Ride in the quadtrac this fall. Lol 😊

I always remove the tailgate before I let someone load me. Two clips, half closed. Lift side, set aside. Replace later. You are like most. Impatient to get in field. But it snowed Easter Sunday. Corn hit $7.69… diesel is going up faster.

That’s a heavy disc and you want it to dry out and you want it at least 2 1/2 inches deap to turn the soils over but chop the corn trash up and really Barry it and dry out the under layers of soil

We a linkbelt just like that you will fight that problem for a long time

I have 2 tanks and I also put a lot of magnets in the bottom of the tanks .

Two of my 5 farmers I follow on the same episode! Keep the videos rolling! :)

Thanks for being the best you tuber you made me become a KZfaq or because you showed me

A few facts about clay tile / tile. Clay tile do not let water in anywhere other then the ends. The seams. Clay tile like clay itself seals itself off...expands. When you have trees.....you will have plugged tile lines.....all the way out to 200 feet from a ( larger ) tree. Trees create their own channel for water .... nearly like a tile but not. In spring time and fall trees use very little water. They become dormant for winter. Along a timber line it will always be wet in the spring time because the channels where the trees are.....the water follows......until trees start putting leaves on. Ive trenched along side a timber fence......and when you hit a larger root......if the ground is wet ..the water will squirt out like a water hose......because you interrupted the trees natural tile line. This property has been neglected for years !!! Remove the trees .....brush........and once every........say 5 years.....spray and kill all the grass over the tile line. Including waterways ! Never spray and kill the entire water way. Kill the grass in ......say 200 foot strips......leave 200 foot ...kill another 200 foot. No need to reseed....the seed is on the ground from year gone by. Sodding.......or raised water ways are cause " only by roots raising the ground up because its filled with roots. This is why..if you have a garden in the middle of your lawn.......and kill / till an area.....the next year that area will be lower. Root from grass are gone/ dead. Same as in water ways !!!!

I love your vids

the tree cleaning reminds me of cole the cornstar when he did it

Pull the tank out and cut two holes in it and you’ll be able to clean al the rust out did this on a Massey last week just weld the cut out pieces back in when done 👍

this was a great vid

nice

spencer is getting pretty good at the excavator great video👍

Nice vid

The rock screen in the banjo fitting is before your fuel filter, if you don't clean it out you will ruin your lift pump . It will cause cavitation

Funny how your starting fieldwork in Iowa but not 3 hours north we still are getting snow and temps of 20s in mid April.

We just started cultivating up here in Onterible

Most excavators have a switch you can charge the pattern into backhoe pattern.

this farming sim gameplay looks so good!

I have done it a lot and have a lot of farming experience and i know a lot of green star too

On our land we cut the nice trees down and took a bulldozer to the rest 😁. Also I couldn't really tell,but where you running it at an angle across the rows?.....that chops them up better than going straight with the rows.

the dually is so sick

You should have gotten NDY manufacturing rock box. We have one and you can leave the weights on it with the rock boxes on both sides

This is my first time watching and are the also the KZfaqr the Squad

Looks like that tune made a big difference

Hey Grant, have you ever though I about getting a land roller, it would be good for you beans ground but no use on what you plan on planting corn on. If you roll your bean ground after you plant it it will put some corn stocks that you planted into, into the ground so that you aren’t scooping them up in the fall with your combine. Just a suggestion that I could see benefitting your oporation. Love the farming vids man

Make sure you spray because the downed corn will come up next year

If your going to notill your beans get some copperhead closing wheels on your planter. Standard rubbers aren't real good in notill. The copperheads will close the seed trench and your get a better stand. Best planter add on I've ever done.

Keep up the outstanding work as always! I always appreciate you taking the time to make these videos for us! I was on ben the iowan farmers channel and saw you had dug up some clay tile! Like that landall too it looks sweet! We bought our fertilizer and seed a few weeks ago, Grant likes to keep his trucks mint clean (lol ). I know iv never met you or ben but you both seem super nice! Hope your ready for spring breakdowns and repairs! Hope all is well on the farm and with family! YEEYEE and have a good one! :-)

Iv been battling rust in the tank on a ASV RC 85 for a year two injection pumps ruined .Filters always full of rust .Tank rust is a major problem.Cleaned the tank several times and still rust.My fuel pick up was draining everything from the bottom of the tank.I cut a hole 3inches above the bottom of the tank and welded a fitting and attacked the fuel line.All the rust is setteling in the bottom of the tank and my pick up is now above the rust and bottom af the tank.When you get rust in the tank you will always have rust in the tank..

Rust water algae is what I saw in that fuel tank. There is a treatment that will kill the algae

imho tilled ground will yield better, but with the price of fuel notill is betah, if I were silage cornin would be tilling

If it’s been sitting very long there is a good chance you’ve got algae growing in that tank. Cleaning it out won’t kill it either, you’ll need to pick up a bottle of treatment. Any fuel dealer will sell it.

we have a batwing to chop the stalks

Nathan from Border View Farms was also hoping to get early beans planter again this year but it was go we this year

We just started farming

That's his first time digging with his new. To him trackhoe he's doing good

Do you guys have access to one of those inspection cameras with the long flexible cable. It would allow you to have a good look at the inside of that tank. Then you could tell if or how bad it is damaged on the inside. It may just need a good pressure wash. Things like that unfortunately have a way of haunting you forever unless you tackle them head on.

Are you looking into the regenerative ways of farming, are you looking into seeding any cover crops in the fall

I LUV YOUR VIDOS 😘