KZfaq needed this one. Community service here.

A "best of" Shafts for Ian would be interesting. Ventus, GD, Diamana, etc.

Tour AD DI has to be my hands down favorite shaft model

Instant all-timer, by request from a few lives over the last couple years and the lads delivered!

Would be good to see comparison of the older models that are still valid and in play like BB, GP, GT, MJ, MT, TP, etc

Just got fitted to the HD 6X yesterday. Cant wait to get it and try it on the course. Amazing feeling shaft.

Just got a refit done on my driver and ended in the HD. It was so good

What’s interesting is I was at Roger Dunn in Monrovia California and I bought or was about to buy a tailor-made burner and it happened to have a tour -6 shaft and it had a price tag of $55 and so I bought it and then the staff saw it and said that was mispriced😂😂. They honored the price and let me walk away with essentially a total of a $350 club.

I think Fraz is due for another super speed training!!

Was in a Diamana D+ limited 6X prior to this season in stealth plus playing at 44.5” but this season switched back to Titleist TSI3 and was fitted with UB 6X cut down to 44.5” and it’s a fwy finder. The dispersion was extremely tight ball flight was very consistent and long. Feel was absolutely amazing. Tried the Ventus 6X blue and to me it just wasn’t as tight as liked it to be. UB just fit everything I was looking for.

I’ve been looking forward to this one since Ian first floated the idea of a big Graphite Design roundup a long time ago! I’ve played all of these shafts but the CQ and new VF. My favorite Graphite Design driver shaft is the HD. I like blueboards and find it to feel like it’s in a somewhat similar neighborhood to the Fujikura Speeder NX Blue. That strong mid kick just syncs well with my swing. Typing this as I’m watching the video, so I’m eager to see what Ian says about it the HD. Also love the DI and UB in fairway woods! I have a DI 8X in an Apex UW and it’s a fantastic combo. The XC is the only one I didn’t like, purely because that super-soft handle just didn’t suit my swing. Two that might not be “current” but shouldn’t be slept on: the VR has a very slightly higher balance point, which I found made it a great pairing with a Ping driver head. Loved it with the G425. And the TP is one you can get for only $125 USD through Callaway right now, which is really a steal.

Amazing video...been waiting for this video for a long time. I wish they included the VR shaft in there as well as the profile is rated at 3+ | 2+ | 3 (handle to tip), which is a stiffer IZ and would match Ian's profile. Maybe another comparison video with Mikey hitting all the GD shafts to see which ones are better suited for him vs the ones that were better suited for Ian?

Ian and Mikey bringing the heat once again! This video is 🔥. Both the UB and XC are excellent fits for in my TSR 3 driver and 3W. Keep up the great work gentlemen!! 🙌👍👍🙌

techy club building/testing content is why i love ya’ll! Killin the game!

Great review! Loved this series! You guys should do one for all the 6 Velocores!

The TP!!!! I got fitted into this one at a PXG fitting. This is a monster shaft. Feels like the Diamana ZF (GT) at impact (if you’ve never experienced a ZF at impact you need to…BUTTER) spun a little less and tightened my dispersion. TP4life (most likely a month)

great video! would have liked a little discussion on the TX vs X flex with Tour AD shafts. I think the X is more like a Stiff+ and the TX is a true X/X+ in comparison to other vendors. i use a HD 7TX in my 3W and absolutely love how it loads, the color match with with Sim2 Ti and the tight dispersion. the HD is really is an underrated shaft.

Best Video so far!

Been waiting for something like this!

I have the IZ in my sim 2 max it’s a bomber

Loved this one, fellas. Maybe now one on the ventus line up? Regular vs TR version?

I have the GOAT Tour AD DI 6s on my TSR2 - went for the Black and White colourway to match up with the driver head better. Fantastic shaft, very stable and consistent 👍

The IZ and the DI are oh so good!

I think the GP is my favorite of all time in the GD lineup. Very good shaft.

OK from here on out, we can all picture the shaft. You guys are talking about in our minds, but Mid and tip number number number this is gonna make it much easier for us understanding what shaft characteristics you’re talking about

AD CQ D/3 - AD HD UW - Best shafts for me. F J B

Got one just like that one...di 6x... and I still hit it at 71 year old.... love it...😊

Would have been a plus to add the VF to the group with the swing of the day for better comparability. Other than that, this is good stuff.

Wonderful. I use the IZ and the DI but I have no idea what data I'm producing. Would be nice to fly up there to get fitted!

I have the HD in my Driver and DI in my 3 wood and 3 hybrid.

These guys are the best!!

Some of the older premium shafts are still top performers. I am a huge fan of Diamana Kai’li 70S/80S I have in my Callaway driver/4w.

I still have a BB shaft on my drive.

Would love to see videos of fitting of us folks with slow swings.i think there might be some significant gains to be had.

UB 8 & 9TX are the best I’ve ever played! Diamana guy for years.

I’ve always wondered, and not sure if this video really answers it, but do shaft companies have a “base model” that they tweak for different weight/flex categories? Or do they really make each model unique? For example, do they prototype/design a 65g stiff and then add/remove weight and materials to make it a 65x or 70 regular?

YES! Been begging for this (selfishly!) for a long time. I play the AD UB 6x in my TSR3, AD DI 7x in TSi2 3 wood, and AD IZ 85x in my TSR3 hybrid. Thank you. 👍👍

I have a Mitsubishi Fubuki K 70 series shaft that I've used in a couple different 3 woods, it just performs way better for me than the stock shafts that came with the clubs.

I have the cq in my driver and fairways 3 and 5 in the driver it’s tipped 1.5” and that really helped me with my dispersion the fairways are untipped it’s an amazing shaft if setup correctly

Love this test guys. I'm very similar to Fras and the DI works in 7x tipped 1". The UB and IZ are better in 6tx than 6x. Thanks for the excellent content.

great video. really informative about how the profile translates into feel.

We need Mikey hitting these different shafts, his swing is like the majority.

Love this video, and have wanted it for a while! I've become a bit of a Graphite Design fanboy, starting with the DI in my SIM UDI driving 3 iron, and recently with the BB in my 3 wood. The BB8x I've got in the 3 Wood, while being a LOT of shaft, it's a BOMBER that has given me a bit of baby draw, and 20 extra yards consistently (while not ruining my gapping). I've loved my Tensei Orange in my driver, but I'm totally eyeing a Graphite Design to replace it... as soon as I have an off day, hahah.

Great test

Just picked up the orange d1 7x for my 7 wood. Feels incredible

Just started using the orange DI and I’m bombing it

I know it was a while ago guys, do you remember if the HD tipped 1/2” as per the other test you did on it? Good number on that one

I hope all the hard headed people in here heard the phrase “shafts dont spin” in this video.

Great ones guys forgot the TOUR AD TP would have fit nicely for IAN firmer DI

Still play the M9003 6x and 7x in the driver. The P9003 8tx in a fairway, not sure why the profile and colorway has never been updated. Such a damn good series of shafts.

I’d love to see a video of testing these against what we average golfers would game off the shelf. Maybe a series of standard Ping shafts compared to Tour AD and so on. I play a G425 SFT with a Tensei orange 60-65 Stiff and have had good results. I built a Riptide small batch 50g Stiff and loved it and was able to make great contact and carry 295 with fairway hits at 55%. I’d love to get that percentage up but golf is hard. It’s so daunting to pick a shaft with all the data out there. Is there any chance you guys can make a video that shows the comparison of these offerings?

Finally!!!!!! You needed the TP and possibly VR in there but all good. Iz is close though

A in-depth look at VA composites line would be good to see

Mikey on the wrench is elite

I actually have a di shaft n its amazing why is it so good

Great video. Please do a review and comparison of the GD Tour AD 55-115 Iron shafts? I'd like to see how they compare to Steelfiber and MMT. Thank you..

I'm not sure if I missed this, but were any of these shafts tipped?

Club champion ftw

Had a Ventus Black 6x and it broke so I used a shaft from the club and I quite liked it. Ping Tour silver 65s. Obviously anything will feel more active than a Ventus Black but it was a nice change. What Tour AD model would be most similar to that Ping Tour 65S I tried?

I play the F-65 in 3 and 5 wood, I’m guessing the CQ or IZ is probably the best match in driver?

If dynamic lie is flatter, does that lead to a bigger fade miss? And conversely, does a stronger tip & upright dynamic lie.. lead to more hooks?

Interesting that I do not see the AD-VR included. Has this model already been discontinued. For me it’s very similar to Diamana and Speeder lineups, particularly Diamana TB and Speeder NX. Quite very firm in handle, moderate midsection and firm at tip. The firm handle and softer mid & tip offers phenomenal feel while it’s still stable enough to be confidence inspiring. I tried the 5X version on launch monitor but struggled a bit on dispersion and high launch. I then tried it in my 3-wood. Worked flawlessly. I ended up in the Speeder NX 60TX but GDI VR was really impressive, as was Diamana. I’m a feel player so really appreciated the VR, especially compared to the Ventus Blue and Blue TR

Wow very nice video

Still using mine and still outperforming all other shafts i have tried.Its that old it looks older than the ones you are showing here.

I had the VR and it had high fliers at times since was only a 70s

Mikey, you said Diamana TB is all-time best in the driver...if you love it in your driver, would you put it in your 3 wood? (generally speaking)...thx

One of these days I’d love to see you test a nventix nunchuck. No flex

Can I ask what jacket that was? This is why I invested in a high-quality Arc’Teryx rain jacket. I don’t ever want to wet out when it’s cold

How about the Tour AD VR?

Mikey twirling that wrench @6:58 needs to be talked about

Would have loved to see the TP thrown on the mix

The video I was after 🙏🏼 I game tsr3 set at 9.25 degree with Hzrdus black 6.5 shaft and use pro v1 ball. I spin at around 2800 on a good strike hitting 1-2 up. What shaft do you recommend to try to drop the spin

I saw you guys are finally opening a location in Vancouver! Who are the fitters there?

Is there any difference in how they perform with Fairway woods or is it very similar?

I think your demographic would be very interested if you did the same test with a 3 wood!

Other than the new VF and the now old GP, the GD shafts all play pretty soft Other than the classic DI you don’t see too many GD shafts on your probably bc they are softer. I’m assuming they have a bigger presence on the Japanese market

Love this video. It is like you were checking my search history. I have the AD-IZ6 in my TSR3 driver and it is a beast for me and extremely consistent. However, I have stock shafts in my fairways (Stealth +) and can't keep those on the planet. I plan to get fit for fairways soon, but given this info what would be good fairway options? I have never used premium shafts in fairways or hybrid. Love Graphite Design, but am open to others.

GD “Pershing” hall of fame’r. 2006 bomber!

Nice review. Where would you rate the stiffness profile for the AD-BB6s? It’s been my gamer for the past 10yrs starting with the Taylormade Jetspeed now in my M6.

Something went wrong? Was the video taken down?

Please do the same with the other brands (Mitsubishi, Fujikura, etc) ❤

That launch monitor set down wind or firm ground the run out numbers for ball swing and swing speed are 10 yards exaggerated

Nice video! This type of videos is what made the channel, not the “best of” series (are you trying to compete with mygolfspy? Their approach is silly, nothing worth copying). BTW - if you were to formally test the differences between each shaft performance, I’m pretty sure that you wouldn’t be able to tell apart performance difference from randomness/noise - standard errors are too large for sample size!

Just wondering if there would be anymore thing similar to a TZ5 60 m4

We’ve been wanting this for a while, wasn’t cq meant as a fw shaft? Next up ventus line up

Hi guys, I’m currently using this setup: Fujikura Air Speeder 40R and Callaway Triple diamond night mode 10.5, i play it at 44.5 inch, C6.5 My swing speed is 95-99mph, i tend to hook it a lot, fly the ball low and have low spin usually

What do you guys think about the VR?

Which shaft in the current lineup is most similar to the VR6?

What would be the newest replacement for the Tour BB?

The AD VR didn't get any love...such an overlooked shaft in their line IMO

Why is Ian saying the butt soft shaft has the most feel? I have always thought the smooth profiles are midsoft shafts like Diamana Blueboard?

Softer shafts Ian could time them and actually get lower spin even when it said mid spin

Did you use 6s or 6x?

HD shaft must be sweet

I heard the $25 G-TECH Graphite Design budget shafts are really good!! Anyone have experience with those?

Why not test the TP? Can you give a comparison of it vs one of the ones you did test

timestamps would be sweet for this test :)

I want a high launch mid spin hybrid shaft stiff no more then 70g

Imagine all the shafts had no graphics and they had no information about their profiles.

Too many shafts in their lineup and a very confusing profile outline.