Grasshopper Tutorial | Parametric Brick Wall

No video

Grasshopper Tutorial | Parametric Brick Wall

Рет қаралды 33,269

Күн бұрын

Apply for Rhino for Architects Training ✔️ howtorhino.com/apply
Extended Tutorial + Extra Project Files 👉 / 41061866
KZfaq Tutorial + Project Files 👉 / 41062711
Free How to Rhino Community 👉 www.skool.com/howtorhino
In this tutorial, we are going to be talking about how to convert a surface, either flat or curved, into a brick wall using Grasshopper. Generation of the bricks will be based on their dimensions that we are going to set first.
Once we define the brick dimensions, we will extract contours of the surface based on the brick height. Extracted curves will be divided in equal segment numbers. Using component Split Tree we will separate odd and even tree branch numbers in order to apply two opposite boolean patterns. In the next step, we will extract every second division point that will be used as an origin of the planes where the bricks will be positioned using Orient Component.
In the extended version of this tutorial which is available on our Patreon page, we will use attractors to make this definition even more complex. The final output contains two different results. In the first method, we will use multiple attractor points. Based on their position and the range we set, the bricks will be rotated. Another method involves the curve as an attractor. The bricks will be rotated based on proximity from the curve.
Related Tutorials:
» Rhino Inside Revit | Creating Walls Tutorial: • Rhino Inside Revit | C...
How to Rhino Podcast Episodes:
» Focal Studio - Starting Architecture Studio Right After Graduation: • FOCAL studio - Startin...
» Lazar Djuric - How to Start learning Grasshopper: • How to start learning ...
How to Rhino Tutorials:
» CADMAPPER to Rhino Tutorial: • CADMAPPER to Rhino Tut...
» Rhino Enscape Best Practices: • Rhino Enscape Tutorial...
» Paneling Tools in Grasshopper for Beginners: • Paneling Tools in Gras...
» Convert a set of Lines into Single Closed Brep (Grasshopper): • Rhino Grasshopper - Co...
» Create Stairs from CAD drawing in 1 click (Grasshopper): • Rhino Grasshopper - Cr...
» Modeling Barcelona Pavilion in Rhino: • Rhino Architecture - M...
» Grasshopper to Revit with Rhino Inside: • The best way to conver...
» Modeling a House from CAD drawings: • Rhino Architecture - M...
» Creating 2D drawings in Rhino: • Rhino for Architects -...
📌 Grasshopper Quick Getting Started Guide
howtorhino.com/grasshopper-guide
📌 Facebook group
/ howtorhino
📌 Instagram
/ howtorhino
__
Music by Kokson beatz!
/ ko-oki

Пікірлер: 34

@HowtoRhino 3 жыл бұрын

Apply for Rhino for Architects Training ✔ howtorhino.com/apply Extended Tutorial + Extra Project Files 👉 www.patreon.com/posts/41061866 KZfaq Tutorial + Project Files 👉 www.patreon.com/posts/41062711 Free How to Rhino Community 👉 www.skool.com/howtorhino

@romainrusse7593 3 жыл бұрын

Great tutorial thanks! 👌

@HowtoRhino 3 жыл бұрын

Hey Romain, Thanks! Glad you like the tutorial! If you'd like to take this a step further and have a complete step by step approach in learning Rhino and Grasshopper that includes our personal coaching, you may want to check out our Rhino for Architects 2.0 Course! Please reach out and send me an email at dusan@howtorhino.com if you're interested and I'll tell you a lot more about it there and share the course platform with you as well! Cheers! :)

@stefanguiton 3 жыл бұрын

Great video, subbed!

@HowtoRhino 3 жыл бұрын

Thanks Stefan! :)

@divs8740 3 жыл бұрын

Always a great one

@HowtoRhino 3 жыл бұрын

Thanks Div!

@teoremabim 3 жыл бұрын

hello that parametric family can be sent to Revit? is there any video? Thank you

@alexfireblazeking Жыл бұрын

hey, great tutorial. I am trying to go further with something similar and make the narrowing "tube" out of bricks(like a chimney) but if I leave the same number of divisions on both ends it is not working. Do you have any idea how to overcome that?

@abhoyroy3492 3 жыл бұрын

Awesome ....

@HowtoRhino 3 жыл бұрын

Hey Abhoy, Cool, glad you like it! Thanks for your comment. If you'd like to take this a step further and have a complete step by step approach in learning Rhino and Grasshopper that includes our personal coaching, you may want to check out our Rhino for Architects 2.0 Course! If you're interested please reach out and I'll share the course platform with you! Best!

@saloneeshetty5506 3 жыл бұрын

why is the bounding box componenet required ?

@yilangliang5208 3 жыл бұрын

Hi thx for the turtorial. I am wondering how do you enter a series syntax in panel? Thxx

@HowtoRhino 3 жыл бұрын

You're welcome Liang. On the following page you can find more information about syntax for Split Mask: www.grasshopper3d.com/m/discussion?id=2985220:Topic:950635

@yilangliang5208 3 жыл бұрын

@@HowtoRhino Thank you SO MUCH!!

@vaishnavibhartia577 2 жыл бұрын

While making a CULL PATTERN, instead of selecting single alternate lines, it's selecting two alternate lines. How could I fix that? I'll be gald if someone can help me out. Thanks!!!!

@good04692003 Жыл бұрын

Even I followed your steps of creating curve and connecting to the LOFT, there is no results from my rhino...may I know what is the reasons please?

@madgicarchitects2814 2 жыл бұрын

The orient output isn't aligned well with the curves, i troubleshooted every thing its not working!

@allisuh 6 ай бұрын

When I use the number slider that is attached to addition, instead of moving the bricks away from each other horizontally it moves each row away from each other vertically. Do you know what the issue is?

@amaronahueld7311 2 жыл бұрын

Double Dispatch component also work on min 11:52

@HowtoRhino 2 жыл бұрын

Sure! You can use Dispatch component as well :)

@noahglynn 2 жыл бұрын

Struggling to add a panel with data formatted correctly for the Cull Pattern components input. How do you format the panel like a table?

@noahglynn 2 жыл бұрын

I see now, for anyone else - Panel options need to deselect "Multiline Data"

@Chillgaming_1 3 жыл бұрын

how to export these for the construction drawings??

@juancalvache2043 3 жыл бұрын

Rhino inside Revit

@mattskubic5749 Жыл бұрын

14:03

@DT9896 3 жыл бұрын

the masks of "Split Tree" doesn't recognize the number panels (0,2,...)

@HowtoRhino 3 жыл бұрын

You should put curly brackets {0,2,...} 12:12

@DT9896 3 жыл бұрын

@@HowtoRhino thank you !

@brianadriansanchezgarcia1076 Жыл бұрын

you didnt explain how to write the last panel ( the one that goes in P in the cull pattern), it would be great if you explain more in detail... seems like you think every one is familiar with this... im upset

@HowtoRhino Жыл бұрын

Hi Brian, Sorry for skipping that part. Once you type 0 and 1 in the panel you should right click on it and uncheck "Multiline data". If you still can't make it feel free to download the files from our Patreon page: www.patreon.com/posts/41061866

@domenicorossi2532 3 жыл бұрын

did you already have pre exsisting curves on rhino or? this tutorial was not helpful

@HowtoRhino 3 жыл бұрын

Hi Domenico, I am sorry to hear you didn't find our tutorial helpful. If you are interested to get the project file with pre-existing curves you can find it on our Patreon page: www.patreon.com/posts/41061866

@oh_Siddhie97 2 жыл бұрын

@@HowtoRhino how to work out parametric forms for a properly defined elevational lines (for eg.) a polygonal shape. Some bricks need to be cut on the edge because of the random elevation shape can it be achieved using grasshopper?