Grasshopper Tutorial (Parametric Louver)

Рет қаралды 29,983

5 жыл бұрын

In this Grasshopper tutorial, we will model a series of twisted Louvers by using the Twist command and Iso Curve. First, we will take a base surface to model the strips (Using the Isotrim component) and then we will use the Iso Curve tool to extract the axis and twist the surface. We will also use the Graph Mapper component to change the linear distribution of the twisted louvers and finish the tutorial.
Download the Example file👇
bit.ly/2MI6Da9
Want to learn Grasshopper step by step❓
Enroll in our Course👇
bit.ly/paracourse
👉 Subscribe to our KZfaq channel 📹
kzfaq.info...
Want to know more about us❓
Follow us on Twitter! 👁‍🗨
/ parametric3d
New to Grasshopper❓
• What is Grasshopper3d?
A more advanced tutorial for this lesson👇
parametric3d.com/course/twist...
🗣 And hit that bell notification button! ⏰
👍 Like our videos to hear from us more often! 😊
Comment below to support us! 📝

Пікірлер: 32

@ParametricHouse 5 жыл бұрын

In this Grasshopper tutorial, we will model a series of twisted Louvers by using the Twist command and Iso Curve. First, we will take a base surface to model the strips (Using the Isotrim component) and then we will use the Iso Curve tool to extract the axis and twist the surface. We will also use the Graph Mapper component to change the linear distribution of the twisted louvers and finish the tutorial. Download the Example file👇 parametric3d.com/twisted-louvers/ A more advanced tutorial for this lesson👇 parametric3d.com/course/twisted-louvers Check out our website for more free tutorials👇 parametrichouse.com 👉 Subscribe to our KZfaq channel 📹 kzfaq.info 🗣 And hit that bell notification button! ⏰ 👍 Like our videos to hear from us more often! 😊 Comment below to support us! 📝

@FatenUFO 4 жыл бұрын

Simple and clear, thanks for sharing!

@ParametricHouse 4 жыл бұрын

You're welcome

@maniteja332 5 жыл бұрын

Awesome really helpful !!...and Thanks for showing where to find "Twist"

@ParametricHouse 5 жыл бұрын

🖐 You're welcome

@maniteja332 5 жыл бұрын

@@ParametricHouse How can I create the same on a cylindrical surface? How to make it flat between two twists? Reference Image ...www.torabiarchitect.com/parametric_array/images/twisting_louvers.jpg

@alializadeh8195 2 жыл бұрын

thanx

@mm1171 3 жыл бұрын

Thanks for your tutorial How can I make tubes with their centers as points on a polyline?

@user-dq1rl7bq6q 4 жыл бұрын

Thanks for your tutorial. I want to create a closed curve and restrict the twist area to this curve. Can you help me how can i do it?

@baktashamiri1127 2 жыл бұрын

برام واقعا برام مايه ي افتخارهستش

@brunosuraski5026 5 жыл бұрын

Not sure why my rotation on the twist is too high. I am using the plugin for Rhino 5 MAC. I set it at "degrees" and did the step by step tutorial. In my case when I use 90 rotates several amounts of time the strips and not 90 degrees. Is it possible the plugin works different than the native component in Rh 6 ?

@ParametricHouse 5 жыл бұрын

try using the radians component to convert degrees to radians.

@5280Flower 4 жыл бұрын

Hi, I'm encountering an issue when I mirror. Instead of mirroring into the object it mirrors opposite of the object. How can I fix this?

@clarencemensah8764 2 жыл бұрын

Could I apply this to a curved surface and still get the same result?

@olehkhyzhuk6667 5 жыл бұрын

I have rhino 5, I downloaded the plugin for the twist, but I can't get to the result of surfaces that separate individually.

@ParametricHouse 5 жыл бұрын

You should use the radians component to convert degrees in to radians. Use Rhino 6 for simple twisting

@rbpam3328 5 жыл бұрын

how can i 'set' this effect on a surface that it's not flat? (like a cylinder or a facemask, something round)? thank you!!!!

@ParametricHouse 5 жыл бұрын

Check out our Course lesson kzfaq.info/get/bejne/Z6ukrb2T07fblIk.html

@lmos1537 4 жыл бұрын

What if I want to twist my V isocurves?

@khalifaalansari81 5 жыл бұрын

I'm using Rhino 5 and Jackalope for twisting. everything works fine until I get to twist, I get hundreds of extremely twisted geometries, and yes I have used degrees, and I also downloaded the file, once I used the twist component I got the same results. I know the problem is the component, is there anyway around it?

@ParametricHouse 5 жыл бұрын

Try to keep both the geometry and the axis in groups , that means graft these two inputs.

@brunosuraski5026 5 жыл бұрын

This worked for me thanks! @@ParametricHouse

@chandrasekaran2429 5 жыл бұрын

sir i'm using rhino 6.0 its in built grasshopper, long days back using grasshopper somthing has missing like "remap+". what can i do any alternate by using "remap+" please help me. thankyou

@ParametricHouse 5 жыл бұрын

Download Remap+ from this link drive.google.com/file/d/15gGAEdFFzy-6fNc_XyXRiEpYW6jDeAgc/view?usp=sharing You can also double click on remap+ component to understand the logics behind it

@chandrasekaran2429 5 жыл бұрын

@@ParametricHouse thankyou sir i hope its worked now...

@baktashamiri1127 2 жыл бұрын

عالي من خيلي وقت بود شمارو داشتم ولي نميدونستم ايراني هستين

@maniteja332 5 жыл бұрын

Flatten option issues (Time 8:10).Could you please help me with it ??

@ParametricHouse 5 жыл бұрын

Please download the example file from our website and take a look at the algorithm