Great CNC Trick For Eliminating 90% PVC Fuzzies!
Рет қаралды 560
Күн бұрынThanks to Joe DiLaura for suggesting to do the v carve tool path first then followed by the clearing tool paths. This was a game changer for sure! The amount of fuzzies to be dealt with at the end was reduced by at least 90%. Unbelievable results!
Please Like & Subscribe! Thanks!
Link to get great CNC accessories:
pwncnc.com/?ref=bx35DHIqtXpdQG
Use coupon code “BILLTRACY” to get 5% off!
IDC Woodcraft’s THE HOG:
idcwoodcraft.com/products/the...
XFasten double sided tape: amzn.to/4aqIsF9
Amana 1/4 0 Flute: amzn.to/4aDoZBz
SpeTool W03005 1/8 0 flute: amzn.to/4cJ6Nrs
SpeTool W03012 1/16 0 flute: amzn.to/43M1G5O
Amana 45613 45° V Bit: amzn.to/3QeKSPt
** Feeds & Speeds for this video in order of bits used:
All CLIMB CUTS
Amana 51404-K 1/4” 0 Flute
• 12,000 RPM
• 200 IPM Feed Rate
• 60 IPM Plunge Rate
• 25% Stepover
SpeTool W03005 1/8” 0 Flute (used again for final profile cut - same settings)
• 18,000 RPM
• 80 IPM Feed Rate
• 60 IPM Plunge Rate
• 40% Stepover
SpeTool W03012 1/16” 0 Flute
• 18,000 RPM
• 72 IPM Feed Rate
• 60 IPM Plunge Rate
• 20% Stepover
Amana 45613 45º 1/4” V-Bit
• 14,200 RPM
• 35 IPM Feed Rate
• 60 IPM Plunge Rate
• 20% Stepover
@joedilaura2560 3 ай бұрын
Glad you tried my suggestion. Thanks for posting a new video to quick too.
@TerrapinCreations666 3 ай бұрын
Thanks for the idea!
@oseanmc 3 ай бұрын
Where do you get the PVC from? I'm inspired to try this. I mostly have only used wood. Love the contrast.
@TerrapinCreations666 3 ай бұрын
Home Depot. 24x48x1/2 inch thick sheet is about $40. Thanks for watching!
CREATIVE COUPLE
Рет қаралды 61 МЛН