I. NEED. THIS. Seriously, this is gorgeous! GEC is like Case, but actually viable.
@oldfool26355 жыл бұрын
Good education of some small things I did not know, Thanks.
@Alumapro235 жыл бұрын
Old Fool 👊
@stevegoldsmith27815 жыл бұрын
GEC if you like it, buy it! Yes, those words are to be embraced. Nice job.
@jimhebrank745 жыл бұрын
Very nice! I was lucky enough to get the Chestnut and Orange Springfield bone. They are sweet.
@Alumapro235 жыл бұрын
Jim Hebrank I’m definitely happy I was able to get one of these. Great pattern I had never had before. 👌
@billmc89645 жыл бұрын
I was lucky to get a #99 burnt Elk, great vid!
@Alumapro235 жыл бұрын
BillMc89 Very nice. I got cart sniped twice on those and then ended up landing this chestnut and a dealer finally sending me an invoice for one I asked about when the knives first dropped. So, now I have multiple chestnuts and no Elk 🤦♂️😄
@andresmiguel25733 жыл бұрын
@@Alumapro23 Don’t dealers do preorders?
@sisler427895 жыл бұрын
Just picked one up on ebay because of your video. thanks for posting!
@Alumapro235 жыл бұрын
Jake Sisler Very cool! Enjoy, man 👊
@MRSOMTHINBASIC5 жыл бұрын
Cool
@llucagullo38765 жыл бұрын
✨precious ⚡️💫🤩
@Alumapro235 жыл бұрын
LLuc Agullo 😁
@kcbeem1235 жыл бұрын
She is a beauty!
@Alumapro235 жыл бұрын
kcbeem123 Thanks 👊
@darvinclement84045 жыл бұрын
Nice looking wood on that one. I lucked into a Springfield bone 99 and a beavertail 85 that should be here Monday. Keep the great videos coming.
@Alumapro235 жыл бұрын
Darvin Clement Very nice! I’m happy to see some patterns come back that haven’t been run in a while. I hope they look into some other patterns that haven’t been run in years in 2019.
@PatrickDustman5 жыл бұрын
Great video, love that. SurvivalAustria
@Alumapro235 жыл бұрын
SurvivalAustria Thanks 👊
@davids95495 жыл бұрын
Just bought the same knife today! Very lucky to find one here in the UK. Quality is just stunning. The bolsters - are they in fact stainless steel rather than the usual nickel silver? They certainly look and feel that way to me.
@Alumapro235 жыл бұрын
David S Nice score 👌. As far as I know, the bolsters are brushed nickel silver on this model.
@davids95495 жыл бұрын
@@Alumapro23 Thanks, that's good to know. I hadn't realised nickel silver could come in a brushed finish.
@yosef62165 жыл бұрын
pretty
@jtb_55 жыл бұрын
I had a chestnut that had lighter grain with some nice contrast. Solid lock up and centering, but had the scuffs on the bolster. I ended up selling it because I landed a standby reserve that I wasn't expecting. This is a cool knife, for sure.
@Alumapro235 жыл бұрын
Joshua Butcher Mike is good at gauging those things. 99% of the time standby means you’re getting one. 👊
@jtb_55 жыл бұрын
@@Alumapro23 That's good to know, thanks! This was the first standby I've been on, having either missed or hit before.
@Alumapro235 жыл бұрын
Joshua Butcher It can be tough. Always good to land one. People sometimes get mad at Mike about how long it takes to ship highly reserved knives out, but he’s very careful on how he counts. He does his best to come through for us.
@jtb_55 жыл бұрын
@@Alumapro23 Yep. I've made it a point to buy from Mike when I can. I even emailed him before I bought the first 99 because I wasn't sure how he considered the standby in terms of commitment. His response was generous and so I have no qualms about selling the one I bought and buying from Mike. I'd rather support a good man, even if what I'm buying is not as much to my liking as another (it isn't like I'm getting a defective product, after all!).
@Alumapro235 жыл бұрын
Joshua Butcher Yes, Mike is a great guy that tries hard to make the customers happy. I’m always happy to support a business like that.
@JTsKnifeLife5 жыл бұрын
I'm just getting into GECs now, and I'm finding that the single blade models tend to be the most in demand and spike in value the most. Would you agree with that, and are there any you would recommend more than others? I currently have a 78 and just ordered an 85.
@Alumapro235 жыл бұрын
JT's Knife Life From what I’ve seen and what I’ve gathered talking to people as they grow into the hobby, there are a few reasons for what you’re describing. When people start off, they like single bladed knives for a variety of reasons. That creates a demand for single blade variants. Then there are the SFO’s and exclusives that are a mix of single blade and multi blade knives. For example, the TC’s. TC’s fly off the shelf because they’re exclusive knives, but they also happen to be single blades knives, most of the time. I have a video in my playlist on knives that I would recommend to people starting out. I list the 15, 77, and 78 in that video with an explanation as to why I recommend each. Traditionals, especially GEC’s, can be great knives to own and fun to chase, but they can cause you some headaches 😄👊
@asphyxiate145 жыл бұрын
Is that a crack in the wood under the top bolster on the acorn side??
@Alumapro235 жыл бұрын
Asphyxiate14 No, it’s the coloration and the grain of the wood.
@peterpuleo29045 жыл бұрын
Nothing will ruin a knife faster that using it as a pry bar.
@Alumapro235 жыл бұрын
Peter Puleo Depends on what the definition of pry is and what the knife is, but I agree, in the right conditions. There’s nothing to support a traditional knifes pivot so it’s just going to slowly work itself apart, for example.
@jackasswhiskyandpintobeans93445 жыл бұрын
You ever heard of "Bear and Sons"? Made in Alabama USA. A bought a Rosewood Barlow from BHQ(on a whim). It's a...really decent knife for the price. Walk and talk is equivalent to GEC-was surprised about that. Fit and finish..not perfect. Springs are annoyingly proud and shield transitions to bolsters aren't smooth(not horrible). I sent the company a message stating that if the quality control was better they could compete with Great Eastern. For the price I paid it really is a good knife. Kind of a sleeper.
@dwainsw40765 жыл бұрын
Chestnut wood or chestnut bone. Title says wood, you said bone in video. Thinking it’s wood.
@Alumapro235 жыл бұрын
Dwain S&w Yes, I misspoke. It is wood.
@twilightshooter49905 жыл бұрын
Chestnut wood is very soft. Not the best choice for knife scales.
@Alumapro235 жыл бұрын
Twilight Shooter Softer, absolutely. Balsa like, no. If I could roll pictures in after the fact, I would. I discussed this with my buddy before I even got mine. I had a stainless 15 in chestnut and in elk some years ago. I 5th pocket carried the chestnut and the adjustment knob of my chapstick left faint markings on the cover. Best? Best for what and whom? I’ve covered the topic of our use of the word best in another video. Best is a qualifying term that requires parameters. I could make an argument that wood isn’t the best handle material for a tool at all. Wood is a natural material that is going to require care, has a lower strength than a synthetic material (in general), and no matter what you do, it’s not going to hold up as long as a synthetic material. For a traditional knife, I don’t know. From talking to individuals, myself included, we buy traditionals for the way they age and the way they look like they can tell a story. So, in that case, softer covers would be “best”. I don’t know what your use of the word best was in relation to, but I’d be interested in hearing.