Рет қаралды 14,462
In this series we will check the valve springs for compliance with the factory characteristics for elasticity. And also we will pierce the valve and adjust the contact spot between the rocker and the valve.
Previous series on this motorcycle:
1. A new project! Green! Purchase of a new Dnieper. • Новый проект! Зелёный!...
2. Green! We restore the bridge, we sort out the shock absorbers. • Зелёный! Восстанавлива...
3. Green! Restoring the engine of the Dnieper. • Зелёный! Восстанавлива...
4. Green! Installation of the ignition lock Dnipro. • Зелёный! Установка зам...
5. Green! Overview of the design and tuning of the carburetor K65. • Зелёный! Обзор констру...
6. Green! Measurement of fuel consumption Dnepr standard. • Зелёный! Замер расхода...
7. Green! Installation of electronic ignition, measurement of fuel consumption on the Dnieper. • Зелёный! Установка эле...
8. Green! K65 vs K68 what to put? Comparison of fuel consumption. • Зелёный! К65 vs К68 ка...
9. Green, recovery! Oil pressure measurement. Disassembly. • Замер давления масла н...
10. Green, recovery! Elimination of the longitudinal clearance of the crankshaft. • Устранение продольного...
11. Green, recovery! Assembly. Oil pressure measurement on the engine disassembled. • Сборка. Замер давления...
12. Green, recovery! Extrusion of guides, drill of channels. • Выпрессовка направляющ...
13. Green, recovery! Guides from BMW to the Dnieper. • Направляющие от BMW на...