One thing I started doing with the braid on the reel is I slip a little piece of heat shrink tubing on the tail end of the braid and go over it with a little torch or heat gun. Stops it from fraying at the end

Great details , Greg. I will rewatch this several times.

Great video, would love to see a video showing where you plug the charger in, how it's connected to the fence and how you ground it.

Your channel is a beautiful mix of practical how-to and amazement of creation!

Thank you so much Greg!

The Master of Masters Greg Judy and his wife, great team work! Thank you for all the wisdom and great results! Greg your wife does great with her camera job and support assistance, thank you! I watched lots of you in other's videos, am happy you opened a video channel, as soon as I heard Justin Rhodes announcing it, I came, subscribed to watch them all before I even watch one video lol. I already watched 2, so thank you!!! Long live to the Judy's!!! May Jah bless you!!!

Thank you!

The geared reels are awesome 👍 I love em!! A plastic garden hose reel does a fine job on polywire. They are super cheap at garage sales and they hold way more wire

Very informative.

Thank you ! 👑👑

Greg's recommendation for gear have been so helpful to me. I've literally just purchased what ever Greg uses. It's so nice to buy once and cry once.

Jan did a great job shooting this video!!!

Thanks for the video. You do a great job explaining everything like usual. I bought some power flex poly braid and that stuff is awesome but I bought the reel from them though. You want to take your time unwinding and winding up your polybraid because it will make a mess. I had one of my kids help me and not paying attention and it look like a birds nest on the side of the reel.

Great video. I learned a lot. Ty vm.

It’s amazingly that for a minimal manufacturers input they just need to increase the reel diameter by 1”. I have been using the doublhook 2” wider version sold by power flex fencing. Like it so far ( been using for a year). Regardless of my 2 cents, thanks Greg

Tools can make or break the job! Have a good day🌷🌷🌷

Greg, this is my first year moving livestock with temporary fencing. I picked up 4 taragate reels from Timeless Fence from your recommendation. Thanks for your help, it means a lot for a newbie like me

I'm looking at your broken spool and think you could 'fix' it by using a paper plate and epoxy. Us the plate as a mold, then mix your epoxy, spread it over the plate and reel, then when dry, sand until smooth. You can reinforce the seal between the 'new' part and the old by using super glue and baking soda mixed and applied. I'm thinking that may well work.

Thank you! We’ve been having a terrible time and I gave up and they have the whole field now. My first mistake was letting my 5 & 7 yo wind the wire onto the new reel....

Tools of the trade, gotta have the right tools to be efficient.

Hey Greg, you should do a video on how you keep track of the calves parents and what a good family tree chart looks like. Thanks for the great videos!

Love these videos you should get sponsored by some companies I wonder when people order stuff they like Greg Judy sent me so they know you da send folks their way

"we can send people to the moon..." Hahahaha. Nice one Greg

Hey I'm buying fence supplies and the only reel available locally is a Speedrite. Also got my first 10,000' of HT wire today, 170k rather than 180k, because I didn't want the 215k and those were my two options. Back to the reels, the Speedrite looks just like a Taragate (and is made in NZ), but it's not a Taragate. You said everyone else's brake sucks, so I'll hold out for a Taragate (pay shipping). But if anyone is using a Speedrite with great success (on an ATV with no brake issues) I'd be glad to know it and might get the locally available one.

And like the label says 13:26 - six stainless conductors and 3 tinned copper conductors. Nine total--mixed metal because the copper is a far better conductor, but also very expensive to use. It doesn't have "9 steel wires".

ok, where do I send my reels to get reels rewind by you???? except to not over winding the reel I have made most of your mistakes but now I know what to do and most of all what not to do!!! thanks again

The closest I will ever get to filling a reel is filling the bobbin on my sewing machine. You are so right about the mess you can create. I have one bobbin that I messed up so badly I never got it properly filled. Its just not worth the time to get the tangled mess off. Is that stinking thinking? Now for the next installment. Grampy drove the wagon full of kids to the train station and they walked along the tracks to the red school house. It wasn't a long walk but they had to cross the railroad bridge and mum was afraid so she would get down on her hands and knees and crawl across it, ending up a lot dirtier than her first grade teacher liked. She felt that the teacher held it again her as the woman hit her with a ruler across her hands every day. Some how that ruler got tossed into the river on the last day of school that year by someone who shall remain nameless. As a side note I attended the same school for four years I used to have nightmares about crossing ihe bridge. The school still had a well for the water supply and two outhouses out back. To be excused you had to put your hand up with one or two fingers displayed so the teacher would have an idea how long you would be out there 😊.as Mum would say enough of that. Have a great day ! I still have lots of mum stories if you are still interested!😘💞🖖🖖🖖🖖👍👍👍👍🛤️🚂🏤

Greg how do you keep the reel from free spinning when you need to stop and hook it on something? The bearings are so good and free the spin and I get lots of back lash and haven’t found a good way to stop it any suggestion would be appreciated thanks

I have Gallagher 6 stainless steel 3copper strands.

Greg I’m wanting to build a 3D fence for my orchard. I’ve seen some people using poly rope in the back and ribbon in the front. Would It be better just to run rope all the way around it in the front and back? What would you recommend? I’ll be using a 3 strand in the back and 2 strand in the front. Thanks!

How do you put a new spool on that reel?

Pasture management systems makes a braid just like that powerflex that’s just as good or better and it’s available but for 3 times the cost. I don’t care to pay more if it’s actually better just per say the O’Brien fence post but that’s not the case with the braided fence.

Do you have a video showing the moving/takedown of a 3 strand rotational pinwheel design with a centralized water area?

HeyGreg, do you use a lot of anti-mating aprons?

If I'm connecting to high tensile wire and using step in post do I go from hot to hot which completes the circuit or non conductive plastic on one end and Tara reel to hot.

She is a damn good guide for his tutorial

I need a tee shirt with a cartoon picture of you saying "DON'T DO THAT!" 😅

Any links to where you get the stuff from?

Bought 3 rolls and 1 reel

I couldn’t find that t post on their website

No cameras on the pastures today. I bet you the aminals are all just laying about shooting the breeze. Plus sized models must have a day off too. 😆😆

I may have missed it but do you use a metal fence post driver or something else to drive the timeless fence post. The old fiberglass post I use to use would splinter off if they weren’t hit square. I really enjoy your videos.

Any specific knot to attach the poly braid to the reel when adding a new stand?

How many strands does the best poly braid have?

Does the temporary fence have to make a complete circle to be effective ? Meaning both ends going to hot. Or can a single strand ran to a insulated post be dead ended and still be active.

Need to come check out a grazing diary in swmo 700 cows all grass

What is your longest stretch you run the poly raid? Do you ever go more than 1300 feet and need another reel? How do you hook that up?

Greg, What are other brands that might work if I can’t get taragate in my country?

I just got my first lease. It’s only for five years but it’s a start. Would it be a mistake to make the perimeter fence from poly braid?

Those reels look like standard wire reels. They can certainly be sourced if they can be replaced without damaging the reeling mechanism.

Greg, are there no reels that have a traveling guide like those on baitcaster fishing reels? Thanks

a good opportunity for someone in manufacturing to improve on the reel, maybe they can make the spool out of metal instead of plastic

Mr. Judy can you join polybraid lines with a knot, if so what is the best way to join two lines together?

What kind of charger do you use with it?

Thanks for the great advice! Can you tell me which size 1.25,1.75,2.25 post you use? Also wondering how you drive these. I'm down in Springfield and know it's hard to get a steel post in the ground. Are these rigid enough to use a driver on?

Greg, just went to your website and I don't see where to sign up for the September class

What energizer down you use? Also can you put the info you use in the comments so we can search for it?

Timeless Fence does also carry Terabraid which as far as I can tell is exactly the same as the Powerflex braid and you can buy pre loaded Teragate reels with their braid on it and it's actually cheaper than buying the reel and braid separately. Go figure

My guess is you sell a fair amount of Timeless Fence products with your recommendations. You should ask them for an affiliate link, so you an get a little kick back for your efforts. Thanks for sharing your experience! Us newbies need the advice.

What fencing do you use for permanent fencing on the perimeter? I hope you will be able to answer, I realize this video was posted awhile ago.

Have you ever used the mixed metal terabraid? And how does it compare to the powerflex?

WHy is poly braid better than old metal wire?

Them Darn Latches 😡

😎👌👍✌🖖😁

Braided poly wire, Bovine dental floss !...

Why are those posts superior to the metel "t" posts?