Grizzly G0947 Jointer Review and Unboxing - 8 inch
Рет қаралды 2,034
Күн бұрын00:00 G0947 Intro
00:19 Unboxing
00:33 Assembly
01:00 Parts and Assembly Review
01:40 Leveling
03:20 First Use
04:06 Adjusting the Fence
04:26 Adjusting the Cut Depth
05:45 First Impressions
06:34 Cutting a 45 degree Angle
08:47 Final Thoughts
Website: thisoldfarmshop.com
Merch: thisoldfarmshop.creator-sprin...
@caleb1464 2 ай бұрын
Your sleeves 😮 be safe! That was terrifying to see.
@campion05 5 ай бұрын
Just ordered the same machine. As with my cast iron top machines, I apply a paste wax and buff to the top making it much easier to push stock over the bed. Less rocking of the finish cut. Have fun. Thanks for the vid.
@ThisOldFarmShop 5 ай бұрын
That's a good idea! Thanks for the tip!
@natenichols9737 Күн бұрын
That tool you used to find the distance between the level and table....what is that?
@ThisOldFarmShop Күн бұрын
A feeler gauge... Like this one amzn.to/45sx2PR 👍
@zachshott7833 5 ай бұрын
Do they sell a larger fence you can add on?
@ThisOldFarmShop 5 ай бұрын
Not that I can find. I was thinking about trying to make one. If you find one, please share 🙏😎👍
@wildbill23c 2 ай бұрын
No, what you see is what you get. Kind of the standard for the smaller benchtop jointers. I have the 6" version and I wish the fence was just a little longer sometimes.
@vvxtrucking5366 Ай бұрын
The paddles look like they are difficult to work with
@ThisOldFarmShop Ай бұрын
Yes they are! End up kicking the back one up to push with. It's doesn't grip hardly at all.
@vvxtrucking5366 Ай бұрын
@@ThisOldFarmShop Would a push stick with a small lip work better?
@ThisOldFarmShop Ай бұрын
Possibly... I've been making do with these for now 👍
Wooden ThingsAndStuff
Рет қаралды 42 М.
Bon Bon Media
Рет қаралды 17 МЛН
Josh Ponder
Рет қаралды 5 М.
Matt Montavon (MMCC_Woodshop)
Рет қаралды 7 М.
Bon Bon Media
Рет қаралды 17 МЛН