also comes with aluminum suspension compared to cast or boxed steel, Air ducts to cool down the front brakes, and is a few inches lower compared to stock. gives it a lower center of gravity for better cornering.. Everything combined makes this big & heavy Tahoe handle like you're driving a compact car

@@GTsPerformance I have a shift knob with a 12v momentary button in the side from speed dawg and it has a black wire coming out of the bottom not two connections like your switch how would I wire this up with the blue wire?

@Mason Wheatley it's just one wire, it's probably getting ground from the metal on the actual shifter. You can use a test light to confirm.. Gator clip on power(+) and test light on the shift knob wire.. should light up. If that's the case, simply connect that wire to the (blue) ground coming from the msd box (instead of the power like I used)

Royce speaks the truth. I have a 2013. .. I have work to do.. but not much! Holy shit this big pig hauls ars!

who asked 😅

What turbo manifold do you see here?

Nice build 🔥 what computer are you using?. I thought of getting hp tuners, but don't know squat about tuning

@@GTsPerformance get ahold of a phone app called LS droid,a computer program called Tuner Pro RT and something called OBDlink Lx.Will get you up and tuning for 60 bucks.Theres another computer program called PChammer that allows even more customization.Theres some awesome videos explaining it all in detail

Thanks bro! 😎👍

It’s for racing 👍🏽

I figured that much 🤣🤣🤣

Ive seen the intakes.. thinking about it for later on. And it comes stock with 373 posi rear diff.

Depending on whether this is a fuel cut 2 step or spark cut. Most are fuel cuts, Sounds like one too. So his cats should be okay

@@MrPerfect409 spark

I don't have cats no more did a cat delete couple years ago😂

@@user-ix6le1ql8l lmao

I had it on my 2010 Tahoe with long tubes, catless y pipe, Carven TR exhaust and cutout and the thing was sick. Breaking necks all year long. Got tired of it so I just pulled the exhaust off and I’m about to sell my 2 step soon, same one in this video.

It's called Good Day kzfaq.info/get/bejne/rteinLKr0N--pGg.html

Your truck is more than ready for one of these! 🔥🔥

@@GTsPerformance thats what im saying. I'm asking for one for Christmas gift lol

Need a vid imma do this to

Delete the maf, n the knock sensors

I wanted to put a cutoff and keep the magnaflow, but it's really tight on space. Unless I move the magnaflow to where the spare tire goes..🤷🏻‍♂️

Yes, this 2step is meant for launch control. My truck is still running the original stall converter, so I can't put the launch so high. Also, I wired mine to a push button switch so there's another (hold the launch button and release at the same time as my brake) step that I have to do, but.. having it connected to the brake pedal would make it easier. for launching. Just remember to put a toggle [on/off] switch to cancel the 2step in case you want to do a burnout, 🤷🏻‍♂️ or maybe so it wont engage 2step while in normal stop and go driving, every time you hit the brake.

If you want single pops you need to get it tuned

Thats a sure fire way to fuck your shit if you somehow haven't already

@@CosmicGalaxyMC well he said "bang diesel guys are like wtf just happened" the bang was his transmission blowing up... Leaving the diesel guys wondering wtf just happened

@@extremepoweraddicts2978 gotcha gotcha, I read it weird I guess

ExtremePower Addicts 😂😂

To launch it

that's normal, holding on the 2step usually it pulls some ignition and makes it backfire like that

I'm looking at shorty headers. I know long tubes give more hp at higher speeds, but I prefer fitment. What I'm trying to figure out is either delete the cats or gut them out.. the 2step is something I want to keep messing with, but I need to get rid of the cats first. I like the idea of the cutout also

@@GTsPerformance i say gut them out unless you know of someone that will pass you on inspection without cats

You can get rid of them but you’ll need a tune in order to pass inspection. I had long tubes and catless y pipe with a Carven exhaust and a quick time performance 3 inch cutout. Breaking necks all day every day!

Yea, I don't think the wheels have the sensors. I installed new tires not too long ago. CEL was there before, and still on now 🤷🏻‍♂️

@@GTsPerformance ask your tuner to turn that off

It's not a turning thing. The tpms system runs off of sensors in the wheel. You can get them for $100 a piece or less and almost every tire shop has a tool to calibrate tpms sensors. If you hold the lock and unlock button down on the key fob it will trigger the tpms learning system on those chevys and the horn will honk twice then once for every wheel that's calibrated, 2 more times when finished. You can only do it with a tpms tool.

@@roycewuzhere6544 or you can ask your tuner to turn it off

I know I can turn off the CEL with an ELM327 bluetooth scanner.. but tbh, I don't know about the TPMS. as far as I've heard, you Need the sensors or get used to having that light on. Some ppl can't run those sensors on certain aftermarket wheels.. so the solution is to carry the sensors inside the car so that the computer can detect them nearby. I could be wrong, but 🤷🏻‍♂️ I guess I just don't mind the light.

you wont believe when i say this, but it's actually part of an old extension cord i ripped apart. the ends were damaged, but still have good feet of thick guage wire for stuff like this. white, black & green :)

I did buy one, but came is smaller pipe diameter. Instead, I removed the magnaflow and straight piped it. Sounds better and louder. kzfaq.info/get/bejne/r9ZpnZOImJfVc30.html Also, I switched the 2 step from push button, down to the brake pedal and added an interrupter switch. I'll give it a go on another video

It does work I have a lc9 5.3 Only difference I think is lc9 has 799 heads and is aluminum block.

I got mine from Rich Desbian racing.. rdracinginc.com/shop/ols/search?keywords=Msd%208733&sortOption=descend_by_match

I added an aftermarket cam by Texas Speed, so there is a completely different tune now

Oh no, you can still use this with the stock stall converter, but you would get the most out of it if you had a higher stall .. something like 3200-3600 My stock stall is about 1700' so if I set the 2step anything after that , it will start spinning the wheels before it hits the 2step

Yes, just look up "MSD 87331"

*for

Thanks brother my old car is in a million pieces ... I wish we could upload pictures here...

It'll 2step anything past the set limiter, so it doesn't matter if you're half or full throttle..

Yes set your 2step for say 2 thousand rpms and hold it to the floor and when the light turns green just push your 2step button and boom you'll launch

Its about $250. Just search "msd 8733"

Yup, same one! 👍

Technically everything can damage your engine if used in excess, but to each their own. I've had mine for years and still as fun since the first day.

Nikola Tesla mostly meant for drag racing

So you can put the gas pedal to the floor to a set RPM and not over rev the engine also known as a rev limiter.

@@QQTrick1QQ that but it's meant for drag racing so you don't roast your tires off the launch lol

Coil packs aren't part of a routine maintenance that you need to change out. My truck is 13 yrs old, with 195k miles. Even if I replaced them now, they should be good for another 13+ yrs when the truck has 400k miles.

Okay thank you

This one is for Chevy LS engine, but I'm sure there is a 2 step for your truck.

I got mine from rdracinginc.com/shop/ols/products/msd-ls-2-step-launch-control-2-step-rev-limiter-for-lsx-8733

I got mine from rdracinginc.com The plug n play for ls engines is "PN 8733", but you can do a Google search for your vehicle. rdracinginc.com/shop/ols/search?keywords=Msd%202step&sortOption=descend_by_match

I think was around 180k

GT's Performance cool man I was wondering because I am trying to buy a Tahoe and do all the mods you done to yours and thanks bro great videos

Yea, its the same thing

@@GTsPerformance is the same one you have or a different #

Same one. MSD pn 8733

No man it’s for an LS😂🤣

In this video, I wired the 2 step to a momentary switch. instead.. connect it to the brake pedal, just hold the brake and rev up your engine. When you are ready to launch, just release the brake.

This works for both, turbocharged and na engines.

🤫 don't give away all my secrets!

Haha, you have no idea! 😂😂 Even if that's so,.. hollowing the catalytic is better for the engine 💯👍

Yes.thats a factory harness In his Tahoe so the connections are plug and play for all 5.3

Yes

Yeah pretty much. Just a baby cam from Texas speed and k&n with moderate tune.