Guide for Amit's Timer Resolution (Better FPS Lows)

Рет қаралды 32,771

Күн бұрын

In this video I cover amit's timer resolution because the lucas hale version only has a locked rate and the locked 500 isn't the best one for your machine, so this video goes over how to get more accurate results with timer resolution
\\
Make sure you block scripts again after you’re done
File Pack: drive.google.com/file/d/1q9rz...
\\
Lower PING:
GearUP: www.gearupbooster.com/camp/fo...
Exitlag: exitl.ag/khorvie
\\
Personal Links:
If I helped you consider becoming a member for 3$
/ @khorvietech
Twitter / khorvieplays
Discord for help: / discord
//
Khorvie is someone who focuses on helping others by testing random optimizations and then sharing what works. I always try to be patient and respectful to everyone I come across since I know not everyone is a pro at this sort of thing.
Turn on them noti's to be there for every video that comes your way.
Chapters:
0:00 Intro
0:30 Start
0:43 Step 1
0:56 Step 2
2:05 Step 3
3:30 Step 4
5:44 FPS Bench/Outro

Пікірлер: 649

@khorvietech 16 күн бұрын

Edit: make sure you block scripts again after you finish. Hi guys, little guide for understanding benchmarks: From 1ms to 0.5 (OG TIMER RES VIDEO) there is an average 1.42% average fps increase. and from 0.5 to my best value 0.506 (THIS VIDEO) it was another average 1.34 increase. So don't expect a million extra fps from timer res please :)

@xyzabc-qi5fj 14 күн бұрын

which scripts ?

@khorvietech 14 күн бұрын

The command used to allow them in the first place ^

@VeekkuP 14 күн бұрын

@@xyzabc-qi5fj Set-ExecutionPolicy restricted . thats what i did

@shxify 14 күн бұрын

What's the command to block scripts

@oomunty 14 күн бұрын

@shxify I think just open powershell as administrator again and run the command Set-ExecutionPolicy Restricted (before it was "Unrestricted")

@xyzabc-qi5fj 14 күн бұрын

Not only watching your videos help me to gain more fps but also i can learn more vocabularies in your videos. Very helpful

@khorvietech 14 күн бұрын

@KerwynPromoter 14 күн бұрын

great stuff bro gonna try this now keep up the good work

@AvilaMS 14 күн бұрын

Thank you a lot Khorvie.. The timer resolution is so good that I'm going to test this new method and come back to tell you my experience using it

@RelxyhYT Күн бұрын

how did it go?

@takeda750 14 күн бұрын

Love to see it. Best videos for PC performance and also educational. Keep it up Khorvie

@khorvietech 14 күн бұрын

More to come!

@ogen87 14 күн бұрын

This is the true analysis! Thx for your work mate! Huge thx!

@khorvietech 14 күн бұрын

Glad you liked it!

@user-ne5rf2is9f 14 күн бұрын

NEVER quit bro never!!!,u are so helpfull

@totallynotryuu 13 күн бұрын

I actually did get two with the same delta and standard deviation lol. I have run through basically every guide of yours (and then some) to reduce system latency, so it doesn't surprise me. Keep up the good work Khorvie! I always look forward to your videos.

@khorvietech 13 күн бұрын

Great to hear!

@shawnrobert2685 14 күн бұрын

I just want to say thank you for your videos they are well explained and easy to follow! keep it up

@khorvietech 14 күн бұрын

Thanks, will do!

@spark9_ 13 күн бұрын

This is super easy to follow and super helpful, thanks man!

@khorvietech 13 күн бұрын

Glad it helped!

@MonkeyDMotaz 14 күн бұрын

We all love Khorvie ❤

@alandalusi_1745 14 күн бұрын

THE ONLY I LOVE THE ONLY I TRUST THE ONLY IM HAPPY WHEN I SEE NOTIFICATON OF DROPPING NEW VIDEO !! Million thnaks to you BROTHER

@IsKr5661 14 күн бұрын

BABE WAKE UP KHORVIE UPLOADED

@infinityhvh1646 14 күн бұрын

you helped me become a better pc tweaker from your videos, thank you.

@Optimization-freak 10 күн бұрын

Khorvie my guy thank you so much. Am still waiting for prosseslasso

@khorvietech 10 күн бұрын

It’s in the works currently

@serj_darwin 14 күн бұрын

Thanks for ur work mate 🤝

@khorvietech 14 күн бұрын

My pleasure!

@djole.columbia 14 күн бұрын

bro keep uploading your videos are 🔥

@khorvietech 14 күн бұрын

Thank you, I will

@alirezajolodar6450 14 күн бұрын

Great video as always

@khorvietech 14 күн бұрын

Thanks!

@wsgVedhuuu 14 күн бұрын

Ayyy W new Khorvie video

@khorvietech 14 күн бұрын

@weaboo_8965 13 күн бұрын

Khorvie single handedly saving my 6 year old pc one video at a time

@PowCards 14 күн бұрын

ayy some fps low optimizations, appreciate the work u do man!

@Fel1xVR 14 күн бұрын

w video like always :) keep it up!

@khorvietech 14 күн бұрын

Thanks, will do!

@NyfeCODM 13 күн бұрын

Hey Khorvie, this is irrelevant from the video, but my windows 11 is running with a problem that when I put it to sleep, I can't seem to wake it up with any keyboard click or mouse movements, I have tried searching different solutions from google and here in YT but to no resort. Do you have any solutions in mind?

@JSmithUSMC1992 13 күн бұрын

Check your power plan settings

@khorvietech 13 күн бұрын

Would start there for sure ^^

@gaufrette8361 14 күн бұрын

new video of the goat !!!

@vaan_dex7728 14 күн бұрын

W khorvie as always ❤

@khorvietech 14 күн бұрын

Thanks :)

@ougee3654 13 күн бұрын

Followed it with Ease on my laptop, another great video,

@Kaapzi 14 күн бұрын

For you windows 10 users, you can actually use this guide if you your build number is 19041 or below, so if you use LTSC 2019 you can actually do this

@khorvietech 14 күн бұрын

Most people aren’t on super old versions so I just said it didn’t work on 10, but I have a method coming soon that works for 10 then I’m never talking about timer res again lmao

@Quran_DZ47 14 күн бұрын

@@khorvietech pls do it so soooon just for me

@NotPnoot 14 күн бұрын

i have 19045 😭

@davey5807 14 күн бұрын

@@khorvietech can't wait i have windows 10 22h2 19045

@EU_PETER 14 күн бұрын

Hello, i have delta around 14.480 is it good or bad? and if bad how do i fix it? (nevermind got low after restart)

@Ataraxia95 14 күн бұрын

I had a Delta that was 0.003 higher than another but the Standard Deviation was MUCH lower, am I right to choose that one instead ?

@khorvietech 14 күн бұрын

Yes I would recommend that

@Dev12opt 14 күн бұрын

Yo thanks a lot bro appreciate it!

@khorvietech 14 күн бұрын

Thanks for watching it

@crook2d-464 14 күн бұрын

You should make a Video testing Resizable Bar Bios/Nvidia and see if it helps or affects performance, Keep up the great work! the best at it since everyone talks about settings but no one takes the time to actually test them like you do.

@khorvietech 14 күн бұрын

Great suggestion!

@TrunksKun 14 күн бұрын

do i need to open the timer resolution everytime when i boot my pc? Also how do I block scripts after I finish? do I need to do that everytime too?

@khorvietech 14 күн бұрын

Use the command used to allow scripts and just type the answer to block them. If you put timer res in the startup folder it should open every time automatically

@TrunksKun 14 күн бұрын

@@khorvietech i just need to press "K" and then enter right?

@zoekfrog5224 14 күн бұрын

Loved this video! Thx (;

@khorvietech 14 күн бұрын

Glad you enjoyed!

@user-hb8rs4ju9c 14 күн бұрын

Someone has already done the same as u , but still u made it more easy to understand and perfect ❤😅

@khorvietech 14 күн бұрын

Sweet :)

@sizzl999 5 күн бұрын

Thank you pookie! my timer res is the same as your and unstable as well, do I have to worry about performance decreases?

@khorvietech 5 күн бұрын

I don’t believe so

@Drahonn 11 күн бұрын

Hi Khorvie, u know about ISLC from DDU dev? Mb its better and simplest than what u mention in video. Or is it something that works differently?

@khorvietech 10 күн бұрын

It works pretty similar to others

@user-xt2lr7ce4m 14 күн бұрын

Only guy i trust for tweaks

@patrikmedia 10 күн бұрын

hey Khorvie, is it normal that every couple of seconds my delta jumps to 0.5? usually its very stable at around 0.01. my timer res is 0.508

@khorvietech 10 күн бұрын

Yeah spikes can’t be helped sometimes, it’s should be ok

@patrikmedia 9 күн бұрын

@@khorvietech ok thanks! great video

@e-go-guitar5605 7 күн бұрын

Yo, quick question: I had voltage settings for better temperatures, but the stress test was failing. So, I adjusted the voltages for the test benchmark and now I've changed them back to my original settings. Are the delta measurements now conflicted?

@khorvietech 7 күн бұрын

Potentially but I probably wouldn’t stress it too much

@EpicMinecraft7978 14 күн бұрын

I have Windows 10 LTSC Build 19044 do you think it'll work? I got as far as the bench command but Windows doesn't recognize this as a command... Edit: Nevermind I got it to work. My lines were so weird like it was just a straight horizontal line across the board. I had to literally zoom in so much to find it. Mine was .562

@magnomliman8114 13 күн бұрын

Thanks a lot !

@ezioauditor3i167 14 күн бұрын

So, this is what I was talking about on the discord some days ago. Amit´s Timer Resolution seems to work as intended when at least the first Intel C state (C0) is enabled. While disabled, although you seem to get better frames and reduced input lag (subjectively), the deviation on the MeasureSleep program its soooo inconsistent. Could you test both cases for the best scenario?

@nicolasrodriguez5054 14 күн бұрын

Good to know, might test it later.

@khorvietech 14 күн бұрын

Perhaps, definitely seems like something to pursue

@bganimegaming660 14 күн бұрын

hey i have an issue with windows 11.When i download sth from arc browser or any other it downloads super slow i think it is because of the efficiency mode in task manager what do you think have u encountered this problem i thought of using Process Lasso it solves the problem a bit but the download speed is not the same as in win 10

@khorvietech 14 күн бұрын

Have you tried brave or Firefox to see if it happens there too

@TheGhasts109 14 күн бұрын

Just did this tweak on my powerful main pc And my delta value was .020 better then prior And standard deviations was previously 0.1145 with this better value with 0.0011 So massive improvement to the second value with a little to the first My value for my pc was 502 Will play around with this in game shortly Verified fiber on the apartments too mentioned prior and will find which ones are the best choice before continuing the process

@darkly6287 13 күн бұрын

are you planning on doing a video on process lasso in the future?

@khorvietech 13 күн бұрын

Yeah

@IIHydraII 14 күн бұрын

Large FFTs are better for testing the timer FYI. Also you can edit the PS script to only test to 0.600 for example, rather than all the way to 0.8.

@LiveType 11 күн бұрын

Just wanted to give a huge shoutout that this does indeed work if you have "timer related issues". Settled on the same 0.506ms value, but my results oscillated back and forth from 14.2-~14.8ms over a 20ms interval. Went from horrible nearly unplayable stutters while background videos were playing with turbo boost disabled (~2.8ghz 13900k, don't judge I run it maxed when needed, near idle power efficiency > peak performance | the system runs 24/7) to buttery smooth with 12 videos playing at the same time. Even when hardware acceleration was enabled. Thought it was a bricked windows install but nope! This works and is worth a shot if you have horrible random stutters with lots of stuff running on a modern chip.

@DallasCS2 14 күн бұрын

Great video as always! Is there a way to revert after?

@khorvietech 14 күн бұрын

Just take out of auto startup pretty much

@miniplaylist7327 13 күн бұрын

Hello Khorvie can you make a video of Dpc Thread please ?

@vicvm. 14 күн бұрын

Does windows 10 or 11 have more stable fps with 5800x3d with rtx2060 in fortnite? I am not sure if I update to windows 11, but after the fps comparison with the Amit timer res at the end of the video it looks tempting ngl.

@khorvietech 14 күн бұрын

i have a similar timer res method coming soon that might be worth a test before swapping. 28th

@argonaut2622 4 күн бұрын

Yo Khorvie, appreciate all of the content and I've been frequenting your channel since the internet optimizer from 7 months ago. I love the knowledge and discussion you provide, rather than just throwing out scripts and telling people exactly what to do. My best timer is .534 with a .065 Delta; .0015 STDEV. Doesn't that seem like quite a high delta and timer to be using?

@khorvietech 4 күн бұрын

Nope seems like it’s in normal ranges

@argonaut2622 4 күн бұрын

@@khorvietech Thanks for the reply brother. Wish you the best.

@dylan03drd 9 күн бұрын

I'm having an issue where in the powershell its telling me "Windows PowerShell updated your execution successfully but the setting is overridden by a policy defined at a more specific scope"

@khorvietech 9 күн бұрын

I think that means that there was something configured within group policy that needs changing

@TheRealSkeb 13 күн бұрын

Do you have to run the setTimerRes… shortcut every time you boot or is this just a one time thing that automatically gets applied and runs from boot?

@khorvietech 13 күн бұрын

Should run from boot

@bagaswiranto8188 14 күн бұрын

Hi sir khorvie i have Q about pagefile virtual memory should i change that for more stable system or leave that settings? And For time resolution im using process laso is good

@dragz 14 күн бұрын

nope! pagefile dont mean shit little buddy, leave as auto

@khorvietech 14 күн бұрын

For pagefile I would leave on system managed typically

@bagaswiranto8188 14 күн бұрын

Oki thanks for advice everyone

@nagiaoe2434 14 күн бұрын

Amit nuked his github ;-;

@khorvietech 14 күн бұрын

🤯

@ogen87 13 күн бұрын

WHY?

@z3k0cs2 12 күн бұрын

valleyofdoom github rewritten pc tuning

@coucoucestmoi2505 12 күн бұрын

are you going to make a video about the lossless scaling thing on steam ?

@khorvietech 12 күн бұрын

Eventually yes

@Bojcha76 14 күн бұрын

Problem is that many, usually audio programs, forces 0.5 (minimal) and overrides everything that controls timer.

@khorvietech 14 күн бұрын

Hmm good to know

@phiqqss 13 күн бұрын

Is it fine if my PC turns off after I run the stress test or is that actually really bad? I'm guessing it's not great

@khorvietech 13 күн бұрын

Might mean some deeper issues here for sure

@fazeflakern140 13 күн бұрын

Question! If i set the numbers in islc rather putting files in the startup, will there be any differences?

@khorvietech 13 күн бұрын

Not too sure, haven’t tested it

@fazeflakern140 13 күн бұрын

@@khorvietech i have one more problem when i put the best value for me the Delta sometime decrease and sometime increases and stays like that! What to do about it?

@Aadarsh155 13 күн бұрын

For me on windows 11, I had to run the following three commands to get timing resolution running properly: bcdedit /set useplatformtick yes bcdedit /set disabledynamictick yes bcdedit /deletevalue useplatformclock After a restart, I used the method shown in the video to get the most optimal timer value.

@nate1459 12 күн бұрын

Thanks for this comment, I had to do the same commands to get the time to work after coming out of sleep.

@patrikmedia 10 күн бұрын

this helped me as well, once I put in those first 2 lines via admin cmd and rebooted, the sleep timings were no longer stuck at 15ms. for me 0.508 worked best. thanks a lot!

@justinwest7250 5 күн бұрын

my numbers were 0.518, 0, 033. when i do the short cut for timer res service do i put 5018 for the number 5000?

@khorvietech 4 күн бұрын

5180

@justinwest7250 4 күн бұрын

@@khorvietech thanks i will give it a test

@shikikanaz4624 14 күн бұрын

Hey Khorive, just wondering whats a good modem or router for gaming?

@khorvietech 14 күн бұрын

Good question; not too sure top tier stuff

@kleincantaim2184 3 күн бұрын

Would the timer resolution fail if I were to delete the files I placed on my C: drive on the 2nd step after finishing?

@khorvietech 3 күн бұрын

You just need the actual program and shortcut, everything else can be trashed

@kleincantaim2184 3 күн бұрын

@@khorvietech noted, thanks for the reply and the tweaks helped a lot since I just changed to Windows 11 😀

@Iordtimmy 14 күн бұрын

I did all the steps but measuresleep says the timer is 0.5000 and I cant change it. I was able to change it to 0.526 the first time but I had to redo it again because I forgot to restart my pc after the registry fix and now its stuck at 0.5000 no matter what I do.

@khorvietech 14 күн бұрын

you might need to take it out of startup and redo the shortcut

@LilyFoxxor 14 күн бұрын

i have a question, all my DeltaMs are in the 14.1 to 14.8 range. why is that?

@khorvietech 14 күн бұрын

Did you restart pc after applying the registry fix?

@alexisqt6006 14 күн бұрын

I tried pressing tab after I wrote bench on power shell and it did nothing you know what could be the problem?

@khorvietech 14 күн бұрын

if you followed everything without skipping parts of the video then there should be no reason for it to not be working

@GodKnifeW 14 күн бұрын

Same I did everything and nothing happen. I pasted the code like in the video have mini problem that I thing it's might from that ---> can't open powershell as administrator what can I do? Maybe it's because off it.

@ext.1241 14 күн бұрын

is this a permanent change? or do i have to change it everytime i restart the pc? working rn, so im saving the video for later. idk if you adressed that during the video

@khorvietech 14 күн бұрын

Yes as long as it’s put in the startup folder it’s permanent

@ext.1241 14 күн бұрын

@@khorvietech thanks for the quick answer, i love your videos man, super reliable information

@Dzrk 13 күн бұрын

I can tell this rock is smart

@kaleabamare6488 11 күн бұрын

do i need to run the "SetTimerResolution" everytime i power on the pc?

@khorvietech 11 күн бұрын

If it’s in startup then no

@bandas938 14 күн бұрын

Will this method work on every version of Windows unlike other video where you said it may work on some versions

@khorvietech 14 күн бұрын

It only works on 11 but I might have one final video for 10 users soon

@exmtweaks 14 күн бұрын

W video

@khorvietech 14 күн бұрын

Thank you 🫡

@gfdmt 13 күн бұрын

hi! I have a problem with the second step. my resolution in measuresleep app shows the 15.6250ms, instead of 1.000. what should I do?

@khorvietech 13 күн бұрын

Did you reboot after reg fix?

@gfdmt 13 күн бұрын

@@khorvietech yup I did - and thanks for answering! it appears that this occasion means nothing - any further steps met zero errors, so anyone meeting the same problem can go ahead

@phiqqss 13 күн бұрын

Any help? When I run the timer resolutin created as Admin it shows that it's running in the background on my taskbar but there's like nothing else showing up on my pc i just run as admin then nothing really happens I'm guessing it's opened and working but can someone please confirm this to me thanks

@khorvietech 13 күн бұрын

Yeah it runs in the back

@Vasanth-CS 13 күн бұрын

Hey korvie, I'm thinking of moving from windows 10 to 11 to use timeres to reduce input delay, but I have a few doubts. Is there any major difference between windows 10 and 11 interms of performance (cpu/ram usage) since I'm low on ram (8gb ram with 2gb used for vram and 6gb usable)

@prestige934 13 күн бұрын

Once you debloat properly both are almost same

@khorvietech 13 күн бұрын

I think fully optimized you shouldn’t really notice a difference

@Vasanth-CS 13 күн бұрын

@@khorvietech Aight thanks a lot

@robicho7182 14 күн бұрын

Hey khorvie when I run the measure sleep on just the desktop I’m good, but once I play Fortnite the numbers are inconsistent is that normal ?

@khorvietech 14 күн бұрын

No, did you make sure all the timer res settings are good and in the startup?

@robicho7182 14 күн бұрын

I did everything and I was told to disable power savings that would interfere with timers it’s strange. Like it still sleeps for 1 but I’ll get .5 sometimes only when I’m playing.

@ext.1241 14 күн бұрын

question, i have 2 lowest points, one is (0.512 ms, 0.049 delta) and (0.524 ms, 0.046 delta) should i just go with the lower delta and ignore the ms?

@khorvietech 14 күн бұрын

Check the standard deviations and compare the lowest of those

@Aaryanplayz450 14 күн бұрын

will it increase my fps on intel uhd 620? in valorant normally it gives 45 fps without stutter but stuters if i uncap my fps higher than that

@khorvietech 14 күн бұрын

It might, just need to test it

@Mgdfurry 14 күн бұрын

after i do these step, can i close the prime95 after that?

@khorvietech 14 күн бұрын

Yes

@jorrell279 14 күн бұрын

My Deltas were all the same. 0.498-0.502 on almost all of them. What could cause this? 😅

@khorvietech 14 күн бұрын

Could try restarting the pc and trying again

@MrSSD-ft4bt 7 күн бұрын

Hey man I need some help, my delta's are averaging between 14 and 14.5, is that really bad? I really need some help on this matter man, thanks, and again amazing content!

@emmaIyn 7 күн бұрын

im not sure of course but, there's a discord server if you wanna join it and someone else/maybe he himself, can help you

@khorvietech 6 күн бұрын

A reboot is usually needed after the reg fix, would recommend using the benchmark again

@FirePowerIm-a-streamer 14 күн бұрын

Can you make a new video going through what utilities is the best to get performance example exm like you’ve done before but now with many other utilities scripts

@khorvietech 14 күн бұрын

I plan on getting into utilities really soon

@FirePowerIm-a-streamer 13 күн бұрын

@@khorvietech nicee!

@Arzack711 14 күн бұрын

Wow, just impressive! I have a massive improvement doing this trick alone. Noted that I had set the timer resolution to 500ms since way back before you create the video last month. In fact, I had set my pc to this timer resolution since I first setup my current pc on December 2022 with all current hardware. Then, you just tell us to create an even tighter timing? Of course, I have to try it. Thus, I tried and the results shows as soon as possible. Even on general usage of pc, I could tell the improvement. I'm not even in game yet. The snappy response is real man.

@Arzack711 14 күн бұрын

Now, I can safely say that all lags as as slow as my dexterity and nothing is even slower than that ;)

@aussieboy923 14 күн бұрын

Yo silly question I have 2 monitors one is oled does yo work on both ?

@khorvietech 14 күн бұрын

I would assume so

@claytNbg 14 күн бұрын

I tried 3 times and everything works as in your video, but my timer res is stuck on 0.5000, for me 0.522 gave the best delta and deviation? Any ideas why that might be? I had process lasso and had 0.500 there but uninstalled it and ran your registry in Step 1, restarted each time.

@claytNbg 14 күн бұрын

Nvm, I had another timer res from before and close that and now it works, however my delta is way higher than yours, wonder why that is

@khorvietech 14 күн бұрын

Might need to be benchmarked again if you had another timer res running

@-.h.- 13 күн бұрын

Hey khorvie, which TimerResolution should i choose from these? (Sorted by Delta) 0.514, 0.037, 0.0044 (Run 1) 0.532, 0.039, 0.0070 (Run 3) 0.546, 0.053, 0.0046 (Run 2) 0.564, 0.073, 0.0066 (Run 3) 0.562, 0.074, 0.0060 (Run 3) 0.56, 0.074, 0.0069 (Run 3) 0.548, 0.095, 0.0041 (Run 1)

@khorvietech 13 күн бұрын

Seems like it changes a lot, would guess .514

@KyouSNWLF 10 күн бұрын

Hey man, recently Driver Easy made it so that you can't use it without paying money, you can't even manually install drivers, do you have any other recommendations for such software?

@khorvietech 10 күн бұрын

Snappy driver installer origin is what I think most recommend

@KyouSNWLF 9 күн бұрын

@@khorvietech thank you so much man, keep up the good work!

@unknown-11777 10 күн бұрын

for me it is showing on the second set of numbers 14+ is that norma

@khorvietech 10 күн бұрын

Did you reboot after reg fix

@darthjadar4154 14 күн бұрын

khorive pls help the startup folder is empty when i click it i have winrar and windows 11 pls help

@khorvietech 14 күн бұрын

It’s supposed to be empty, you need to put the new shortcut in there, watch the video without skipping it next time

@darthjadar4154 14 күн бұрын

@@khorvietech thanks i didnt skip i swear in the vid you said your old one was in there and you deleted it and put a new one but fooooor me that wasnt in there

@khorvietech 14 күн бұрын

ah gotcha

@cristianguzman682 14 күн бұрын

and for a value of 518, how should you apply the command --resolution 5000 --no-console

@khorvietech 14 күн бұрын

5180

@gizzyde3156 14 күн бұрын

wsp khorvie, i my lowest is "0.524" do i put it like "5024" or "5240"

@khorvietech 14 күн бұрын

5240

@muneer4042 5 күн бұрын

how about 0.63

@mazenc.9623 14 күн бұрын

I have super high sleep how do i fix that? My timer res is on 0.5 and the sleep is on 15ms

@khorvietech 14 күн бұрын

Reboot after applying the reg fix

@ImL1ghtning. 13 күн бұрын

You can test turning the idle in power settings, it's rare that doing tests better fortnite but worse minecraft... I would like to know what you think about that

@killerjordan3608 14 күн бұрын

khorvie, what is best nividia driver for gtx 1060 6gb card?

@khorvietech 14 күн бұрын

I’ve typically recommended 546.29

@orenfn1795 12 күн бұрын

Hello, whenever I download the latest Nividia graphics driver, my games are really laggy and u get frequent fps drops for the whole day and then next day it goes back to normal, this happens with every update, do you know why this is.

@khorvietech 12 күн бұрын

Shader caching

@orenfn1795 11 күн бұрын

@@khorvietech thank u

@AtlasStreamTTV 13 күн бұрын

i ran the test twice and showed a new number the second time also should i run the test in normal open softwares when I'm gaming or should i close all even backgrounds and set the results?

@khorvietech 12 күн бұрын

Close out everything except for the prime95

@AtlasStreamTTV 12 күн бұрын

@@khorvietech ok i did that but what the command for restrictions of the execution policy?? should i just set Restricted and then A ?!

@andreoski3 13 күн бұрын

do i need to click on the final file every time i startup my pc?

@khorvietech 13 күн бұрын

Nah as long as you put it in startup correctly it should be fine

@mantvydas_nor 14 күн бұрын

After running the shortcut nothing changes. It's set on 5020 in the shorcut. I run measuresleep.exe but it shows resolution 5000. Also what should I pick 0.502 0.49 or 0.606 .446 ?

@khorvietech 14 күн бұрын

You can try running it as an admin and seeing if that applies

@mantvydas_nor 14 күн бұрын

@@khorvietech Doesn't work. Still got better results than before, thank you :)