An Introduction to Polycarbonate Sheets

An Introduction to Polycarbonate Sheets | Product Showcase

Рет қаралды 295,905

Күн бұрын

PBSL Group explain the main differences between the various types of polycarbonate sheets and bars.
We stock polycarbonate sheets in a variety of colours, including clear, bronze, opal, bronze opal and heat guard opal. We also stock a variety of sizes, ranging from 10mm to 35mm.
We also stock 2 types of bars for supporting the polycarbonate sheets. One is the timber supported system which supports 10mm - 25mm sheets and the other is the self-supporting system which supports 16mm - 35mm. You can view these bars in the video.
We sell polycarbonate sheets as full sheets or we can cut them to size, whichever you prefer. They can be purchased from our website here: www.pvccladding.com/polycarbo...
For more information on any of our products or for more advice, please visit our websites:
Gutter Supplies: www.guttersupplies.co.uk/
For all types of guttering, including PVC, Steel, Cast Iron and Aluminium, as well as a wide range of associated products, visit our Gutter Supplies Website.
Drainage Sales: www.drainagepipe.co.uk/
For all types of Underground and Above Ground Drainage Systems and associated products, visit our Drainage Sales Website.
PVC Cladding: www.pvccladding.com/
For all PVC Fascias, Soffits, Cladding Systems and PVC/Metal Guttering Systems, visit our PVC Cladding website.
Subscribe to our channel for more useful information:
kzfaq.info?su...
You can also connect with us on one of our other Social Media Channels:
Facebook: / guttersupplies
Twitter: / guttersupplies
Contact us:
Telephone: 01206 867500
Email: sales@pvccladding.co.uk

Пікірлер: 52

@kp430 7 жыл бұрын

straight forward honest and open ,will be contacting you soon for some items

@forma86 3 жыл бұрын

After watching the video I went to PBS and ordered my sheets, the guy was helpful in working out what I needed to install the sheets etc

@PBSLGroup 2 жыл бұрын

I'm glad you found our service useful and hope to see you again soon!

@AdvanceGreenhouses 5 жыл бұрын

Wow! I have been selling and installing polycarbonate on greenhouses in the US since 1993. I never heard of the bronze / opal option. I am sure that there are a lot of places where this would be a good fit. I agree that people find installing polycarbonate a daunting proposition. It really isn't all that difficult if you just follow a few basic steps. Thanks for the great and information video. Tammy

@PBSLGroup 3 жыл бұрын

You're welcome and thanks for the comment!

@philhode5104 2 жыл бұрын

What do you use to join the sheets together on timber wall

@Vik.uk. 10 ай бұрын

Very helpful video. Thank you!

@TheJSB007 Жыл бұрын

Would there be a reduction in solar heat penetration using double or tripple wall? I understand the thermal effects retaining heat but am concerned about a possible reduction in solar heat.

@user-vu6wy1so6o Жыл бұрын

How easy is it to remove a section / the retaining bars if necessary in the future please?

@nvcken 10 ай бұрын

hi, which one is better for heat reduce on tropical climate for green house between solid poly sheet vs hollow poly sheet?

@learnenglishgrammarwitharu3478 9 ай бұрын

How to set plain compact poly carbonate sheet on a car shed,please suggest.

@MaitreMark Жыл бұрын

I made the roof for my traycover on my 1983 nissan patrol firetruck with this stuff. I like the product.

@spannerssockets6308 5 жыл бұрын

I'm planning a new roof for my conservatory and intend to use 25mm Opal HeatGuard. You mention Opal HeatGuard is good at keeping the warmth in during the winter but will it reflect the summer sunlight heat to prevent it from turning the conservatory into an oven? I intend to fit an opening skylight in one of the roof panels.

@PBSLGroup 5 жыл бұрын

Hi there. Yes, you are correct. The Opal HeatGuard finish ensures good reflection of UV rays on warmer days to prevent overheating. You can read further info on the options or make an order here: www.pvccladding.com/multiwall-polycarbonate-sheets-35mm-solarguard-c-1382/

@chrisfryer3118 6 жыл бұрын

helpful video done well

@patsyd4325 3 жыл бұрын

Thanks for your informative video, very helpful. We are replacing our 20 year old conservatory polysheets they measure 726x2388x16. We intend to use the existing glazing bars. Could you tell me which of your polysheets and end caps we should use please and any thing else we might need to consider replacing ? Many thanks

@PBSLGroup 3 жыл бұрын

Hi, thanks for your enquiry. You will need to use our 16mm thick sheets, available in bronze, clear or opal. The nearest size would be our 800mm x 3m size, you can then trim these to size using a jigsaw. We do also offer a cut to size option for an additional charge, if you would like a quote for this please contact sales@pvccladding.com. Regarding other trims and end caps etc. this is more complex, as they will need to fit to the specification of your existing bars. We would suggest taking extra care when taking these trims off as it can be quite difficult to find replacement items to match existing bar systems. Our sheet end trims and anti-dust tape can be used as these are relevant to the sheet size rather than the glazing bars.

@patsyd4325 3 жыл бұрын

@@PBSLGroup thank you so much for your helpful reply.

@whatscookin8269 5 жыл бұрын

Can the glazing bar cap be removed again if in 10 years i have to replace the polycarbonate alone.

@PBSLGroup 5 жыл бұрын

Hi John, thanks for your question. Yes, it can be removed but like any component system, the longer you leave it, the harder it will be to do. It's not really designed to be taken apart so there's no guarantee of the strength of the seal once put back together.

@ducks_love_bread 5 жыл бұрын

Are the sheets capable of being bent to an arch?

@PBSLGroup 5 жыл бұрын

Hi there, yes our solid polycarbonate sheets can be bent, this is can be seen demonstrated in one of our other videos here: kzfaq.info/get/bejne/b5NkfrZ3t9rdgnk.html Hope this helps.

@AUSTIN12345631 2 жыл бұрын

we had a severe storm 2 weeks ago and the hail destroyed the top layer of my greenhouse, thousands of holes, it was 5mm thicknes, I feel that I should replace it with clear polycarbonate. What are you views? TIA

@AUSTIN12345631 2 жыл бұрын

BTW the glazing tracks on the roof only accepts 5mm

@Balkenroofing 7 жыл бұрын

nice demo, i am interested in talking with you more about your products, thank you Bob Balken

@fernandoguzman2636 6 жыл бұрын

nice panels I make skylighs I very much interested

@PBSLGroup 3 жыл бұрын

Hi Bob, thanks for your message. Do please send us an email to sales@pbslgroup.co.uk

@VIEWSHARE 3 жыл бұрын

When a 180x60x2.5cm sheet is placed on a solid surface, will it crack if a 60kg person knee on it with a yoga mat? Thanks!

@PBSLGroup 3 жыл бұрын

Hi, thanks for your question. Structured wall polycarbonate sheets are not meant to be loadbearing so unfortunately we would advise against this.

@horridhenry1805 2 жыл бұрын

Is bronze /opel good for a greenhouse type situation where you will still get heat and enough light👍🏻

@FonsoDalchemist 3 жыл бұрын

I cant find anything thicker than 8 mm in the united states do you guys sell here?

@PBSLGroup 3 жыл бұрын

Sorry, we currently only sell within the UK. Best of luck with your project!

@muhammadpervez4009 3 жыл бұрын

can solid polycarbonate sheet be used for green house ?

@PBSLGroup 3 жыл бұрын

Yes, it certainly can and its a good solution to the problems of fragility associated with glass.

@AngriestAmerican 3 жыл бұрын

Do you have a system for Hip roofs?

@PBSLGroup 2 жыл бұрын

Hi Robert, thanks for your comment. We don’t supply hip bars as standard, as these are more of a conservatory roof kit item. We would suggest that a local window or conservatory fabricator could probably cut the end of the bar to work in a hip scenario for a relatively small charge.

@worldworldyoutube1979 4 жыл бұрын

Is polycarbonate sheet use in solar cell?

@PBSLGroup 4 жыл бұрын

No, that is a different type of product.

@azentioced9 3 жыл бұрын

does the snap joins will it bend for a nissan shape polly tunnel?

@PBSLGroup 3 жыл бұрын

Hi Andrew, thanks for the comment. Sorry, we're not exactly sure what your question is here - can you clarify, please?

@azentioced9 3 жыл бұрын

@@PBSLGroup hello well will it bend and still work in the shape of a polly tunnel you know half round in war time they had nissan huts maybe you dont know but thats the shape of mine thanks

@PBSLGroup 3 жыл бұрын

@@azentioced9 Unfortunately multiwall polycarbonate does not bend in this way, as the structural rigidity will be compromised if the sheet is not laid flat. We believe that Acrylic or thin sheet solid polycarbonate would be better suited to your application. Best of luck with your project!

@azentioced9 3 жыл бұрын

@@PBSLGroup i never said anything about the sheet? i asked it that would work!! i am useing 10mm sheet bends no problem but how ever i know the fixed stuff that looks the same as that join works fine just harder to do on your own polly crubs use it all the time

@azentioced9 3 жыл бұрын

@@PBSLGroup there could be quite a lot that you dont actually know about the products that you are talking about? just check out pollycrubs orkney

@satishgogole5716 6 жыл бұрын

Great invencen

@PBSLGroup 2 жыл бұрын

Gotta love Polycarbonate Sheets!

@jckirby7994 4 ай бұрын

I sure you were in the statez...

@dkaloupis75 4 жыл бұрын

10 years max...

@angr3819 Жыл бұрын

Ours was up nearer 15 years before it leaked, and it was a bit of a bodge job by the previous owner to start with so nearly 15 years isn't bad. Although it went from clear to dark before it leaked and it wasn't this clearly better quality type in the video.