H2 Rear Door Panel Removal

Рет қаралды 87,946

CJ D

7 жыл бұрын

2006 H2 Rear Door Panel Removal step by step

Пікірлер: 62

@chewonthisfishing 5 жыл бұрын

That’s hilarious. Poor Larry

@rdwilander 2 жыл бұрын

Thanks...Very nice job on this video... Original owner 2003 w/565,000 km and getting ready to replace rear door motor and regulator. Did the wiper motor 4 months ago and currently sorting the bower motor and resistor.

@jkrupa1997 7 жыл бұрын

LOL. Step 1. Get yourself an H2. Step 2. You'll need some tools. Yeah. LOL!!!

@jayerab 5 жыл бұрын

Great video. I'm no mechanic by any means but this video saved me some money and time from waiting on me mechanic.

@cxdyjak 5 жыл бұрын

jayerab Glad I could help

@prssupercars8458 3 жыл бұрын

Just the information I was looking for. BTW great taste in music. Soundtrack provided by New Order, Simple Minds and The Cure.

@cxdyjak 3 жыл бұрын

Glad I was of assistance Im an 80s guy lol

@maxsmeanmachines 2 жыл бұрын

Good video easy to follow, Thanks

@brdahl13 2 жыл бұрын

Your commet to buddy was frikin hilarious! "Gay" Ha ha ha You video was very helpful thank you! I'm replacing a window regulator in my left rear H2 2003 door, removal worked perfectly following your directions! Thanks for the great video! And humor!

@KM-fckutube 9 ай бұрын

All commentary was top notch.

@fernandosanfranciscoca9278 4 жыл бұрын

There you go Larry he just drop the plastic cover and scratch it for you..😂 great vids👍

@rnedlo9909 2 жыл бұрын

Good explanation. Thank you

@thetravi1348 4 жыл бұрын

Great taste in music!

@_FERG 3 жыл бұрын

How would you get the door handle off the outside of the car to replace that?

@Sarahstarr1000 7 жыл бұрын

You are smart and also hilarious 😃

@jkrupa1997 7 жыл бұрын

Poor gay Larry. Pay the man!

@rednecknation 5 жыл бұрын

Classic Larry!🤣

@richardmadrigal3333 3 жыл бұрын

Larry loves it Hairy!

@lalatv900 5 жыл бұрын

my second door handle has now broken and needs to be replaced . the first cost me too much in my opinion. would this be the approach to getting to the outside door handle to replace it? drivers door handle this time...thanks

@cxdyjak 5 жыл бұрын

Yes but getting to the handle is much more difficult on the front doors than the back, just go slow so you don’t break the pugs that attach the door cover to the door

@lalatv900 5 жыл бұрын

a lot more wires to deal with too, thanks

@Sarahstarr1000 7 жыл бұрын

I'm trying to put a new handle on the outter back hatch. Any suggestions?

@cxdyjak 7 жыл бұрын

I'm sorry I've never needed to put on a new rear latch/handle

@chevyboy2066 6 жыл бұрын

Lil'Sarah Starr 1st off, you need a hummer h2. 2nd your gona need tools & you can’t be gay. LOL 😂

@ffhjvbuydb78eb 6 жыл бұрын

CHEVY BOY!!!! 😂

@JSCRILLA253 7 жыл бұрын

thanks man appreciate the video 👍

@loweryscustoms2382 Жыл бұрын

You are definitely correct the guy down the road tried to replace the window regulator in his H2 but he’s gay so he couldn’t do it.

@MyODH 4 жыл бұрын

Still funny almost 4 years later. :)

@cxdyjak 4 жыл бұрын

Travis Van Ness Yes it is lol

@joselacera8716 6 жыл бұрын

sir I thank you for this video is very clear and understandable but my question is how can I change the light bulb on the door do I need to take the door panel complete out can you explain to me please thank you again for your help

@cxdyjak 6 жыл бұрын

Jose, I am sorry I don't believe you can get to the light without removing the panel, I could be wrong but when I tried with door panel removal tools my light started making loud cracking noises and I did't want to break anything, I know the door panels make a lot of noise when removed and it seem like you might break them, but I am confident in the door removal process not the light removal, so I lean on the cautious side. Hope this was a little help.

@joselacera8716 6 жыл бұрын

CJ D. THANK YOU SIR BUT WITH YOUR VIDEO I TOOK A CHANCE AND I REMOVE ALL THE SMALL PLASTIC COVERS AND REPLACE ALL MY LIGHTS INSIDE THE H2 (COURTESY LIGHTS) I REPLACE THEM W/LED's IT LOOK VERY BRIGHT IT LOOK NICE THANK U AGAIN I'W SEE IF I CAN MAKE A VIDEO ON REPLACE THEM. NOW I WOULD LIKE TO PAINT THE FRONT BUMPER THE SAME COLOR OF THE H2 THANK U AGAIN

@hotmasked1 3 жыл бұрын

Epic video

@elijahelijah2042 2 жыл бұрын

1:25 🤣 🤣 🤣

@Buckshot1217 2 жыл бұрын

Great video lol

@samsen201 6 жыл бұрын

Now I see how every other reviewer were inadequate in telling me about tools needed. Yes. Talking of step "One". But then my friend, be careful in how you address the sexually challenged ones or you may get into trouble!:)

@CRay-yq8se Жыл бұрын

Sweet I'm qualified to do the job, I'm currently not gay...but Money talks 🤣😂

@ltans312 7 жыл бұрын

How you take out the door lock.

@cxdyjak 7 жыл бұрын

Lito Tano Once you have the inner panel removed you have complete access to the door locks, just make sure your windows are up, the back doors give you more room than the front fyi

@ltans312 7 жыл бұрын

CJ D. Thanks for your reply and i appreciate it, am planning to change mine the door check on the driver side for 07 hum h2.

@cxdyjak 6 жыл бұрын

The front doors you don't have as much room, small hands work best, ie skilled child labor :)

@eddieex4666 Жыл бұрын

Don't let Larry be around

@cxdyjak Жыл бұрын

I try not to lol

@ffhjvbuydb78eb 6 жыл бұрын

I've been wanting to take my door panels off to put oil in the doors so they don't rust but I'm scared I'll break something because its cheap plastic.

@cxdyjak 6 жыл бұрын

Fox-E (Bonzai) It's easy, the plastic is thicker than it feels, highly recommend spending the $15-20 for the interior removal tools. Good luck

@ffhjvbuydb78eb 6 жыл бұрын

CJ D luckily we have the tools from working on my 98 ram but yeah I'm scared because my panel on my ram isn't the same after taking it off. I also noticed after you took off the door panel you still can't see inside the door? Is plastic covering the metal?

@cxdyjak 6 жыл бұрын

Fox-E (Bonzai) Yes but some vehicles I've noticed don't have the plastic mines an 06 and had it, my buddies was 03 didn't have it

@cxdyjak 6 жыл бұрын

Fox-E (Bonzai) It's a thin plastic sheet/film, I was able to cut along with sharp razor along black adhesive, and was able to reattach to the same adhesive, it's very tacky(sticky)

@leikko3579 5 жыл бұрын

This is my dad

@bluestar9949 Жыл бұрын

🤣 sorry Larry

@aloboda9477 7 жыл бұрын

sorry Larry 😂

@larsinteriors9348 4 жыл бұрын

Lmao , im watching this and .y name is larry , so funny

@oheyitskayyyyyy 5 жыл бұрын

Lollll larry

@Nickp525 9 ай бұрын

Larry is gay, got it 😭

@samsen201 3 жыл бұрын

After step one, getting yourself a hummer, can anyone show me how to open up and replace the broken driver's door key lock switch? Hate these Hummer-haters who vandalize my beauty every now and then...

@cxdyjak 3 жыл бұрын

Sorry I don't have a video for that,