In-Process Part Measurement; Probing in 5 Simple Steps

In-Process Part Measurement; Probing in 5 Simple Steps - Haas Automation Tip of the Day

Рет қаралды 118,106

6 жыл бұрын

In this Tip of the Day, Mark explains how to measure parts while they are on your machine - in 5 simple steps. Probing 1-2-3-4-5! It really is as simple as learning the 5 steps Mark describes. If you’re only using your WIPS probing system to set tool and work offsets, you’re missing out on some very valuable - and powerful - aspects of the WIPS system.
Using your Work Probe (Spindle Probe) videos:
• Set Work Offsets in Se...
• Quickly Pick Up a Work...
Using your Tool Probe (Table Probe) videos:
• Tool Offsets Explained...
• Wireless Probing How-T...
• WIPS - The Haas Wirele...
Probe Troubleshooting:
• Troubleshoot Your Haas...
Renishaw Inspection Plus Manual
www.haascnc.com/content/dam/h...
Don’t miss any TIP-OF-THE-DAY videos. Click here www.haascnc.com/about/Newlett... to join our email list!
If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks!
Follow Haas:
Facebook - / haasautomationinc
Instagram - / haas_automation
Twitter - / haas_automation
LinkedIn - / haas-automation

Пікірлер: 80

@Kc12v140 5 жыл бұрын

I'm not in the market for a cnc machine, but if I was, I would buy one of yours soley because of these videos and how good they are. If you take this much time and effort to help people and make videos this good, I'm sure your machines are top notch. Keep up the good work.

@beachboardfan9544 6 жыл бұрын

I like this guy the best, he has good cadence and is clear and concise about the task.

@peterbowman1783 5 жыл бұрын

We use our probes on this basic level all the time. Haas really makes it easy and this video covers it really well. Great work Mark!

@gorano.4442 3 жыл бұрын

Thank you. I bought VF4SS because of these videos and used this one to make my probe macros.

@andrew_the_machinist 5 жыл бұрын

Love the Probing tips! thanks! I use the probe all day, every day

@OakwoodMachineWorks 6 жыл бұрын

Perfect timing! I got my MM2 here a few days ago and have been loving in routine probing.

@cya_later_man3143 5 жыл бұрын

Your amazing Mark, thank you for training information you provide, not a lot machine suppliers do that I find them really helpful many thanks .

@haasautomation 5 жыл бұрын

Giddy - I am blown away by the effort Haas is putting in right now, to be an open book, and get training material out there. I’m lucky to be a part of it. Thanks for the comment. - Mark, Haas Tip-of-the-day

@d.carlocostantino8425 Жыл бұрын

Excellent presentation.

@agilemachining4774 5 жыл бұрын

Great Video! I like to DPrint to a file with time-date + serial number, and save it to an Excel file;)

@medicalpump9275 4 жыл бұрын

Dude, this is so useful adding probing to your Gcode automatically. Probe first then copy and ....

@coyhill3548 3 жыл бұрын

More mark terryberry hes a great teacher!

@petesmoes3068 2 жыл бұрын

Can you do a video on how to add a second probe and calibrate it? We need to use 2 probes with different styles for inspection on the machine.

@darrenvosper634 4 жыл бұрын

Please do a video on O9817 for probing 4th and 5th axis to set A and B axis to zero.

@stachu343 5 жыл бұрын

Hi Mark, great video (as always) but I was wondering whether You could make another one and show how to mill a feature (ex bore) probe it and bring it to size using IF feature. My company have recently bought VF2 - our first CNC machine and I have trouble getting my head around macro variables. Thanks Stanislaw, Krakow, Poland

@haasautomation 5 жыл бұрын

Stanislaw - I just saw your comment. Perfect timing! We are filming this on Monday, and it should be posted in a few weeks. Keep checking back. Thanks for the comment. - Mark, Haas Tip-of-the-day

@tamilarasukaliyannan4045 3 жыл бұрын

Can u please briefly explain the probe feature sub program for measuring bore diameter

@anhvuduong2675 Ай бұрын

Hi !!! I am using Haas VF7 in the workshop and would like to use the probe to find work offset on every part before running a program. Can you show me how to add that feature to my program so I won't have to do it manually ? Our part is a cylinder type, and I want my work offset to be in the center of the ID. Thanks for helping me out.

@SNRPerformance 5 жыл бұрын

Hi! Love your video's. We have a 2007 VF5/50 TR310. We want to mearsure a bore and find in Macro's. We are having trouble finding path to get to the values.

@haasautomation 5 жыл бұрын

Hi Robert - Check out these others videos, they should help with this. - Mark, Haas Tip-of-the-day. kzfaq.info/get/bejne/Z9JhhcV1zNHGnps.html and kzfaq.info/get/bejne/pradqrihqcXdkmw.html

@chadhess7758 2 жыл бұрын

I'm trying to figure out how to probe multiple z work offsets, automatically, in the beginning of a program. The parts are all different heights, so I'd like to have the probe come in and touch off every z surface each cycle. Any help with this?

@diosdios3307 Жыл бұрын

Does those sub programs are the same for all hass control??

@danielmachado6750 6 жыл бұрын

Daniel Machado - Brazil.

@savathsun8391 5 жыл бұрын

Can you or anyone show an example program of how to probe for part locating correctly?

@chainsaw2701 2 жыл бұрын

On my old Gen controls, it will alarm out when I use "G65 P9810 Z4.0 F200." to move up and out after a probe function. Says " PATH OBSTRUCTED".

@patrickwilson672 5 жыл бұрын

In youtube video "In-Process Part Measurement; Probing in 5 Simple Steps" @ (01:11) you talk about using the probe to verify that a part is located correctly. You show the probe doing exactly what we want it to do, but there is no example program on HOW you got it to work. Please help.

@andrzejmichalczuk7662 3 жыл бұрын

Can i do this program in MasterCam too ?

@zyndapp800 6 жыл бұрын

We use P9359 to measure z-offset but on NGC control it switches the probe off after measuring so if the probing in program then continues with protected movement, I get an alarm 1086 Path obstructed because probe is switched off. Why is it so? It works perfectly on our VF-7 from 2007 for example.

@haasautomation 6 жыл бұрын

zyndapp800 - The P9359 probing macro is output by IPS on some older machines, for Single Surface probing. This can work well, but it doesn’t give you the option of Protected Positioning moves while in-cycle, like we show in the video. Without these moves, if the probe tip makes contact with something, as you command it above the part, it will break. Like you said, the P9359 will turn the probe on and off automatically - which actually is more time consuming if probing more than one feature. I ran the P9359 cycle, on a new NGC machine (G65 P9359 W54. Z-1.) and it ran through without alarms. Shoot me an email offline, and we’ll get you going, TOD@haascnc.com. I think the IPS/VPS/VQC probing cycles are great if you are handjogging the probe up to the part, but if probing from within a G-Code program, I’d stick with the Renishaw Inspection Plus cycles. Thanks for the comment - Mark, Haas Tip-of-the-day

@icey_b1562 5 жыл бұрын

Do you have a link for the manual? How far back are these codes backwards compatible? I'm running a VM3 (classic controller) that's a couple years old.

@haasautomation 5 жыл бұрын

Rich - Here is a link to the probing manual. The codes in this book cover probes from quite a few years back and will work for you. - Mark, Haas Tip-of-the-day. www.haascnc.com/content/dam/haascnc/en/service/manual/probe/english---renishaw-inspection-plus---programming-manual---2008.pdf

@matthewgowan7546 6 жыл бұрын

Why do you advocate using a protected move for the Z return, step 4? I thought it was always a waste of cycle time. Z-, X or Y P9810 moves are essential, but i've never hit anything going up in Z. Second question, I've never been able to get P9810 to move in more than one axis at once, the picture in the manual shows it moving accross and down in the arrow.

@haasautomation 5 жыл бұрын

Matthew Gowan - I’m with you. In most cases, when I’m done probing a feature, I’ll just use a G53 G00 G90 Z0 to rapid my probe back to the Home Position, because I’m confident that won’t get me into trouble. When teaching probing, we always throw in that final Protected move, in case the user happens to be probing more than one feature, as you’ll want to tie all of those probing moves together with P9810 Safe moves (in case a typo is made). Thanks for the comment. As far as moving in more than one axis at a time with a P9810, this is pretty common (G65 P9810 F120. X-.25 Z-.4 ex), there may be something unique about the software version on your particular machine that I’m just not up to speed on. - Mark, Haas Tip-of-the-day

@UMANGK9211 Жыл бұрын

Hallo My name Umang I'm Working fore M/c How to tool all changing stap to stap. Milling cutter, Drilling, Reamer

@alexo8255 Жыл бұрын

4:54 Where i can find this manual with mesauring cycles ????

@pranaynavvi2904 3 жыл бұрын

Hey there Mr. Mark , i am from India. We use the Haas vm6 machine. While setting the work offsets, in the bore , after the probing done , the probe is still in the bore then we used a command G0G90 G54 x0.0 y0.0; now there it hit to the bore and the probe stylus got broke. This is the problem we've been facing recently. So, is there any strategy to avoid the probe crash. Hope you give a solution to it.

@markterryberry4477 3 жыл бұрын

Until the probe is well above the part, we can make sure that all moves are done using G65 P9810 Protected Positioning Moves. If we move the probe, while it is on, with a P9810, then if it hits anything it will automatically stop. The G65 P9810 isn't a real probing cycle, it just allows us to move safely, and stop if it hits something before breaking the probe tip. G65 P9810 can be used with XY moves as well as Z

@TheSouper07 6 жыл бұрын

How about a video on the lathe probes?

@clintonwessels6974 6 жыл бұрын

TheSouper07 and to do calibration video

@vertikalvt 5 жыл бұрын

I know the goal is to sell and support Haas equipment, but just wondering, can you do a protected probe move with Mach3 on any machine or does it have to be a Haas controller? Thanks in advance.

@haasautomation 5 жыл бұрын

Bert - I’m not sure on your particular machine. It comes down to the Machine Tool Builder and the Probing system. If it has a probe, making use of a Skip Signal, you can do some kind of protected positioning, even if you had to program it by hand. With our probes, Renishaw, they have written all of the cool macros for us, to be used with their probes, which makes everything easy. - Mark, Haas Tip-of-the-day

@danand6907 5 жыл бұрын

How does it know where that bore was located? Using that g55 offset?

@haasautomation 5 жыл бұрын

Dan - Yes. When probing from within a program, we’ll use a Work Offset, like G55 to let the probe know where to go. - Mark, Haas Tip-of-the-day

@inuyashacoolieo 6 жыл бұрын

I never used the protected move macro, I just use the g65 p9832 to turn it on and it alarms out of if it hits anything just like a protected move. I have always done it this way and it hasn't failed me yet, so unless I'm missing something you can omit the separate cycle.

@ydna 6 жыл бұрын

Either method would work to the same outcome. The renishaw cycles use that o9810 routine when positioning within the other renishaw cycles, but running the skip movement would do the same thing (just with a different alarm text)

@haasautomation 5 жыл бұрын

Sandman Actual - Yikes. Be very careful if trying this. This will definitely break your probe stylus on many Haas Machines. There might be some software versions out there where this works, but on the two machines I checked this morning, it would have broken the stylus off had I let it. The 50mm stylus on our Renishaw OMP 40-2 probes have a max travel of +/-12mm in X and Y, and 6mm in the Z, before the ceramic stylus breaks, to protect the probe. Thanks for the comment. - Mark, Haas Tip-of-the-day

@chaddanylak8706 4 жыл бұрын

I getting good with probing, I can easy write a probing program off by heart

@alexromero5732 9 ай бұрын

How do I go down and up to probe a boss?

@mathewpelletier5348 5 жыл бұрын

great start; but incomplete, you failed to show us how to test variable #185 to stop process if hole isn't there... please consider extending video so that it provides a complete solution. thanks

@MIT322 4 жыл бұрын

NAYS BRO

@samircool5047 5 жыл бұрын

inspection plus cd wasnt included in my wips kit i bought vf4. how to download inspection plus software?

@haasautomation 5 жыл бұрын

Hi Samir - You can download that manual here, or by searching the Haas website. Thanks for the comment. - Mark, Haas Tip-of-the-day www.haascnc.com/content/dam/haascnc/en/service/manual/probe/english---renishaw-inspection-plus---programming-manual---2008.pdf

@MotorsportsX 5 жыл бұрын

You should do a pocket.

@mannycalavera121 6 жыл бұрын

And his do you store multiple probed hole values?

@vaalcom 6 жыл бұрын

Use the variable from 5:58 and store the value in a other varible. Example #1=#188

@vaalcom 6 жыл бұрын

If you need help pn me i do this every day

@mannycalavera121 6 жыл бұрын

vaalcom thanks I'm new probing

@molitovv 6 жыл бұрын

Manuel Danchado - Brazil

@SexHaver_69420 5 жыл бұрын

Danuel manchandanielado - Portugal

@alejandroalvarado6201 4 жыл бұрын

Por fabor con subtitulos

@ozgurylmaz7827 5 жыл бұрын

Me to want 8 inc cnc lathe machıne but l not have money :(

@mrme8419 6 жыл бұрын

3:48 probe on..

@bret_Lambky 5 жыл бұрын

Part 2, Visit CMSC.org it is the metrology group that can solve anything!

@VaSya5515 5 жыл бұрын

add rus subtitle pls

@seanfainsan2924 2 жыл бұрын

You mean that instead of just lights out machining, I can periodically stop, then push a button to inspect in process and collect the data to preserve my dimensional integrity of any given lot? You just messed up my multiple Restroom breaks.

@bret_Lambky 5 жыл бұрын

So here is my metrology issue with this! If you build it with a broken ruler and validate it with the same broken rulers. All you have done is validation of the broken ruler! Plus you are consuming a lot of capacity that you could be machining parts. I designed a in process metrology station that was more accurate, and greatly improved the process. Saved lots of $$$$$

@haasautomation 5 жыл бұрын

Bret - That’s a good point. Once the volume is there, it may make sense to bring the inspection out of the machine, using a Renishaw Equator or similar. Some shops will actually do comparative measurements, putting a finished good part in the machine and measure the in-process part against the known good one. Trust but verify. I trust the speedometer in my car (internal measure) enough to know when I’m speeding, I don’t need a cops radar gun (external measure) to tell me. It’s all about knowing whether you are making good parts, as early in the process as possible. Thanks for the comment. Calibrate those probes! - Mark, Haas Tip-of-the-day

@bret_Lambky 5 жыл бұрын

Haas Automation, Inc. we do depend on our speedometer to keep us from having that conversation with the local PD. However if you install a taller tire your speedometer is off! I have been in manufacturing for over thirty years! And having the validation in process inspection is great. We just need to be careful in the process and eliminate any error that might occur! Secondary validation is my recommendation! With my operations manager hat on, I want it validated at the same time it is being manufactured! Time is money! If my spindle isn’t turning making chips, I’m loosing money!!! Lol Thanks for the videos, I appreciate what you folks do for the manufacturing world!!

@bret_Lambky 5 жыл бұрын

@TheRealFrankWizza 6 жыл бұрын

Can you really open any video? I have even had problems opening some videos with VLC or Media Player Classic.

@mexicano343 6 жыл бұрын

Funny one

@fredriksoderqvist5398 6 жыл бұрын

Very time consuming , i work in Heidenhain 620 and this is so easy with just tool call + probing cycle (2 lines of code), no need to remember some subroutine codes or anything like that.

@josephshmoe1647 3 жыл бұрын

yeah, lemme just pull those 9000 programs out of my ass first

@markterryberry4477 3 жыл бұрын

Hi Joe. The 9000 macro programs will come with the probe, when it is installed. If they get deleted and you need them again (happens all the time), you can reach out to your local Haas Factory Outlet Applications person and they can get them to you right away. We don't have these macros posted because it really matters what software version your machine is running, and we want to make sure people are getting the right Macro Programs for their particular setup. If you are reading this, and your probe is working fine, its a good time to get a backup of your machine and those 9000 programs now, just in case. Setting 23 9xxx on/off protects those programs from being copied or deleted.

@mikstr22 5 ай бұрын

Would not recommend productivity+ software. 0/10 makes the most annoying g code possible. I’ve actually gotten around the whole thing by manually placing the probe where I need it and then calling the built in haas probing cycles. Much better.