HAL #12: ADC with IT

Рет қаралды 17,065

4 жыл бұрын

In this video I will show how to use the ADC with Interrupt ( IT ). I will also show:
* DAC
* STM32CubeIDE
* Blink LED
And more..
Enjoy.
/ weblearning
Tip me: paypal.me/weblearning1
My social accounts :
/ weblearning1
/ weblearning1
/ weblearning1
Thanks.

Пікірлер: 15

@tonyfremont 3 жыл бұрын

Thank you for taking the time to make these videos. I find them quite helpful and we'll done.

@Weblearning1 3 жыл бұрын

Glad you like them! And thank you for subscribing.

@yanivginlevy Жыл бұрын

הסרטונים שלך ממש אחלה..תודה רבה :)

@galalahmedfahmy5482 3 жыл бұрын

Clear and well documented, thanks for this excellent effort

@Weblearning1 3 жыл бұрын

You're very welcome!

@marcinwitkowski2981 3 жыл бұрын

!!!!!!!!!! Great Video...

@Weblearning1 3 жыл бұрын

Thanks!!

@eventhatsme 4 жыл бұрын

Excellent tutorial! Can you elaborate why you disable the high and low speed clock under RCC? I am using a slightly different Nucleo board (F446RE), and I am able to run with these settings enabled. You should think that the default settings under CubeMX should be correct for the board selected.

@Weblearning1 4 жыл бұрын

Hi. As I don't know what board my viewers are using, even if it's a nucleo, I disable the clock so it will work for them. The OSC doesn't have any effect on the ADC. If you will see my UART video, you will see that I address this issue.

@tonibauler5959 3 жыл бұрын

great video! is there anny diference in the performance between ADC with IT and ADC with DMA? thanks

@Weblearning1 3 жыл бұрын

Yes. DMA is much faster if you want to have few channels sampled, and it will release the core to do other things while the DMA is gathering your data. It will be great also if you subscribe to my channel.

@KenDedes94 4 жыл бұрын

My Clock Prescaler doesn't have the option for Asynchronous? Only PCLK 2?? HELP! My board is STM32F407VG. Is it because of my board?

@Weblearning1 4 жыл бұрын

Different STM32 have different ADC with different options. Its ok. Please have a look at this video on the examples where you can find more information on the settings that you need to set. kzfaq.info/get/bejne/ppmhZs6Sy9radIU.html