Hambini Threaded Bottom Bracket Installation and Service Instructions

  Рет қаралды 81,567

Hambini

Hambini

4 жыл бұрын

This video shows how to install and service a Hambini threaded bottom bracket.
www.hambini.com/product/bsa-6...
0:05 Overview
3:46 Installation and removal
10:27 Bearing Service and replacement

Пікірлер: 564
@hgrworkshop397
@hgrworkshop397 4 жыл бұрын
Omg, self tighten?? Ha ha ha ha, idiot.
@Hambini
@Hambini 4 жыл бұрын
Clearly you don't understand the concept of reactive forces
@MrSuicycle
@MrSuicycle 4 жыл бұрын
Ever wondered, why it's the same with pedal threads, genius?
@earthstick
@earthstick 4 жыл бұрын
@@MrSuicycle I always leave pedals to self tighten with the minimum of tightening on installation. Otherwise they are a pain to get off.
@Cyber_Cowboy
@Cyber_Cowboy 4 жыл бұрын
(Read this in your nice voice because I'm not trying to be rude) Think about this 🤔 if you don't agree with Hambini then just clearly explain why he's wrong and why you're right. Hambini wouldn't have a channel if he called someone a wanker then asked us to like, sub, bell his five second video. People are interested in what he has to say because he'll call out a wanker then spend 45 minutes explaining in detail the design flaws and how it could be improved. If you call someone an idiot then back it up with an explanation. If you don't think he's right I would love to hear an explanation. Trust me I love counter arguments it's how things get better. If Hambini calls someone a wanker and doesn't explain why then he would seem like a dick. Because he explains himself he comes across as being fed up.
@petarmiladinovic4126
@petarmiladinovic4126 4 жыл бұрын
It looked counter-intuitive to me too, so I looked it up with Google, here is what I got: Are bottom bracket threads backwards? Dear Lennard, The way the bottom bracket thread standard is, it would cause a bottom bracket cup to loosen when pedaling if a bottom bracket bearing gets too tight. It seems that if the drive-side is right-hand thread and the non-drive-side is left-hand, then the pedaling motion will not cause the cups to loosen. Did someone got it wrong originally or is there a good reason for it? Luckily bottom brackets are becoming threadless. - Ned Dear Ned, Actually, the English standard bottom bracket threads are set up correctly. When the bearings are functioning properly, pedaling tightens the cups in. When the bearings are seized up, pedaling would loosen the cups. If that’s not clear, then think about it for a moment. The drive-side cup is left-hand threaded, so if the crank were affixed to the cup like a wrench (as would happen if the bearings were seized up), pedaling forward would turn the cup clockwise, which would unscrew the left-hand-threaded cup. But if the bearing turns freely, then the spindle turning clockwise rolls the ball bearings along with it, and the outboard side of each ball turns the opposite direction of the inboard side of the ball. So, the free-rolling balls are tightening the cup in further as the rider pedals forward. The inverse is of course true for the non-drive-side cup. And pedal threads behave the same way, even though the drive-side pedal is right-hand thread and the non-drive-side pedal is left-hand threaded. ― Lennard
@cyclopenguin
@cyclopenguin 4 жыл бұрын
"this is a rebuildable bb, not designed as a throwaway item" -- this is almost unheard of these days for any product and even people. Hats off!
@markrushton1516
@markrushton1516 4 жыл бұрын
The uber wonderful Phil Wood or Royce products will let you do that at a price. But you only buy once
@mattpeters7884
@mattpeters7884 3 жыл бұрын
ummm hope tech do just the bearing for their bb as well and have done well before this bb came out. plus they are super easy to replace. did my with a arm in a cast.
@duncanicook
@duncanicook Жыл бұрын
@@mattpeters7884 The issue with the hope bBB is that the bearings do not have a nylon/plastic sleeve and so over time they damage the crankset axle
@richardhaselwood9478
@richardhaselwood9478 4 жыл бұрын
Well, that was much less swearing than I expected 😅
@colduncan1063
@colduncan1063 4 жыл бұрын
Same here and feeling somewhat cheated.
@truantray
@truantray 4 жыл бұрын
Must be the new Tourettes medication.
@richardhaselwood9478
@richardhaselwood9478 4 жыл бұрын
@@colduncan1063 You do feel like you're getting ripped off :)
@shannonparker7404
@shannonparker7404 4 жыл бұрын
A little disappointed! Lol 🙂
@lucky.youtube
@lucky.youtube 4 жыл бұрын
It's evident there's no swearing because it was engineered properly ... No swearing required
@gabriel.trainer
@gabriel.trainer 4 жыл бұрын
Long time no see my friend. Missed you. Whatever is preventing you from making more vids don't bother. We will be right here.
@Lestalad1961
@Lestalad1961 4 жыл бұрын
@Gabriel Trainer. Perhaps the two of you should get a room? 🤔😳
@404nobrakes
@404nobrakes 4 жыл бұрын
Chris Voss and then upload the results :)
@gabriel.trainer
@gabriel.trainer 4 жыл бұрын
@@Lestalad1961 My wife is hotter than Hambini.
@gabriel.trainer
@gabriel.trainer 4 жыл бұрын
@@404nobrakes Besides being a christian I am from an era where a man could greet another without being called a homosexual. But no thanks I have an amazing wife just like Hambini.
@Lestalad1961
@Lestalad1961 4 жыл бұрын
@Gabriel Trainer. A four day old slice of toast is hotter than Hambini. Right Sachin? 🤜🏻🤛🏻
@timothymah1576
@timothymah1576 4 жыл бұрын
my left ear enjoyed this video
@daviddoenges6200
@daviddoenges6200 4 жыл бұрын
*shifted the balance to the right and laughed 🤣
@BillyM213
@BillyM213 4 жыл бұрын
Righty tighty, lefty tighty. Got it.
@hiddenstorm5488
@hiddenstorm5488 4 жыл бұрын
Instructions unclear dick stuck in frame
@Arnthorg
@Arnthorg 4 жыл бұрын
It's still righty tighty just viewed from the other side :)
@forevercomputing
@forevercomputing 4 жыл бұрын
righty mighty, lefty hefty
@TheBarnaby25
@TheBarnaby25 4 жыл бұрын
Love it Hambini! Thing of absolute beauty. So happy to see you with another video.
@WUTPanserbjorn
@WUTPanserbjorn 4 жыл бұрын
Another Hambini video with no swearing. I'm scared and confused!
@JMcLeodKC711
@JMcLeodKC711 4 жыл бұрын
There is no swearing because there is nothing "shite" going on in this video
@Hambini
@Hambini 4 жыл бұрын
You can't swear when engineering perfection is presented in front of you.
@mushin111
@mushin111 4 жыл бұрын
@@Hambini I beg to differ. It's fucking marvelous 😉
@JMcLeodKC711
@JMcLeodKC711 4 жыл бұрын
@@Hambini Is this BB already sold out?
@Hambini
@Hambini 4 жыл бұрын
@@JMcLeodKC711 yes. It's on back order
@gavinstone3769
@gavinstone3769 4 жыл бұрын
bottom bracket for life , super impressed ,looking forward to the next sunday roast ,keep up the good work !
@Lestalad1961
@Lestalad1961 4 жыл бұрын
Loving the raw silver version. Just beautiful
@VegasCyclingFreak
@VegasCyclingFreak 4 жыл бұрын
Very nice manufacturing there Mr Hambini. That's the way it ought to be done!
@trepidati0n533
@trepidati0n533 4 жыл бұрын
So oddly satisfying watching you work.
@Pratalax
@Pratalax 4 жыл бұрын
perfect timing for that new tarmac sl7!
@alexho9211
@alexho9211 4 жыл бұрын
Hi Hambini, Great to know what kind of tools need to prepare, installation steps and the maintenance procedures on your bsa bottom bracket, nice video!
@jonathanpalmer5505
@jonathanpalmer5505 4 жыл бұрын
Excellent - no swearing. I'm so impressed I might buy them when my bearings are shot
@teunluijbregts2533
@teunluijbregts2533 4 жыл бұрын
Proper 'nd easy installation of bearings - just the thing I needed. Cheers Hambini 👍👍👌 Loving the polite format, btw 🤗
@RossTheNinja
@RossTheNinja 4 жыл бұрын
Never listen to this lad through headphones. Intro nearly killed me.
@fast.biking_freddy
@fast.biking_freddy 4 жыл бұрын
Welcome
@andyc9187
@andyc9187 4 жыл бұрын
School boy error! Spot the new boy. 😂
@JPMoron
@JPMoron 4 жыл бұрын
Newbie alert!
@olo398
@olo398 4 жыл бұрын
you grow to love it. now jus loop it :-)
@pizza.doctor
@pizza.doctor 3 жыл бұрын
you've won me over with this. I'm saving the video to come back to it for my future bike build
@Bicyclechris
@Bicyclechris 4 жыл бұрын
I bought a Hambini BB for my BBright bike, and it's fantastic. I definitely want one of these for my older Cervelo.
@JMcLeodKC711
@JMcLeodKC711 2 жыл бұрын
I purchased one of these a while back but had to put off installing because my road bike frame cracked. When I finally acquired a Waterford frame I installed it with an older Shimano 105 crank. I never knew what I was missing until I experienced the “ice on ice” level of friction of your BB. Thank you so much.
@michwoz
@michwoz 4 жыл бұрын
Crank went straight through it. Good alignment, good fit. Fully serviceable. I will sleep well tonight.
@astrosecret7260
@astrosecret7260 4 жыл бұрын
thanks for this. done it a million times but i always learn more watching your in depth explanations. Eg i always just installed drive side first and then non. if i encounter a bike with poor alignment and wasn't paying attention that could be disastrous
@paddlestandingup
@paddlestandingup 4 жыл бұрын
The great Hambini is a magician. He has a real job, designs bike parts, and runs a KZfaq channel all at the same time.
@truantray
@truantray 4 жыл бұрын
Childish Hambino: you should make your own BB standard, it's been weeks since we have had a new "standard". I blame COVID and lazy Cannondale workers. I recommend a metric diameter converted from British Thermal Units and 0.7mm added and a random letter. The sales feature could be the second decimal, the world needs a 78.27k mm standard. Make sure it never fits the 78.27r standard (which is NOT 78.27R) and never label it.
@truantray
@truantray 4 жыл бұрын
Oh...and make sure to use Estonian ambidextrous threading.
@pizza.doctor
@pizza.doctor 3 жыл бұрын
@@truantray XD
@31.8mm
@31.8mm 4 жыл бұрын
it's been a while. i thought u were sick. i like ur vid, it's like Ramsay vids but it's about bicycle.
@jasonmant
@jasonmant 4 жыл бұрын
Oh I like know where I'm coming for next BB well done hambini
@ruffrydazz2032
@ruffrydazz2032 4 жыл бұрын
Fantastic! Now I know how to install the part that will never be in stock! ;)
@sascha-lucke
@sascha-lucke 3 жыл бұрын
Nice Work Hambini! Enjoy your videos!
@MrLuigi-oi7gm
@MrLuigi-oi7gm 4 жыл бұрын
So satisfying to watch.
@ElKaaahleeente
@ElKaaahleeente 4 жыл бұрын
Beautiful piece. I also have an older Look frame that "bends" under load in very step climbs, would love it to have your bottom bracket. I've gotten a lot of pushback by bike store managers on mentioning your bottom brackets. They know you and your channel, they keep pushing to buy big-brand BBs instead...from them, of course 😁
@drewacko
@drewacko 4 жыл бұрын
quality work Hambini 👍🏻
@micw8422
@micw8422 4 жыл бұрын
Brilliant! bearing removal.
@basedgodstrugglin
@basedgodstrugglin 4 жыл бұрын
I’m watching, commenting, and leaving a like for the algorithm
@wige3198
@wige3198 4 жыл бұрын
Nice job as usual. We are waiting for the bsa 73mm BB 🙏
@keithevans5667
@keithevans5667 4 жыл бұрын
Looks fabulous 👌 I want one.
@williamensign1408
@williamensign1408 4 жыл бұрын
Very nice work and affordable.
@RavyDavy
@RavyDavy 4 жыл бұрын
Great thoroughly informative video. How does it hold up during winter riding (grit/snow/ice etc); or does it totally depend on the bearings?
@pbalerig
@pbalerig 4 жыл бұрын
Your a legend. Thanks man. I'm looking up your website for parts
@dirkbodschard3961
@dirkbodschard3961 4 жыл бұрын
Looks like the best bb with the least friction ever. At least compared with your other videos. However, I will take a look at your website and order one BSA bb for my bike
@nochancecw
@nochancecw 4 жыл бұрын
Love to see a video on treks new threaded bottom bracket. Maybe they watched your video and made the change ;)
@mariconor242
@mariconor242 4 жыл бұрын
So beautiful 👍
@douglaswagner311
@douglaswagner311 4 жыл бұрын
Hambini...Prince of the Princess blanket!
@lesliekirk7036
@lesliekirk7036 4 жыл бұрын
Nearly as smooth as my crank👍
@galenkehler
@galenkehler 4 жыл бұрын
Six minutes in, grease everywhere, "you should probably wear gloves" 🤣
@MrPagnu
@MrPagnu 4 жыл бұрын
Ready for the SL7 Tarmac 😂
@paulhyland4653
@paulhyland4653 4 жыл бұрын
nice job
@micw8422
@micw8422 4 жыл бұрын
I love finely engineered products. That's one of my draws to cycling. Where else can you go, where the comments are almost as entertaining as the main video content. "almost"
@kenw8875
@kenw8875 3 жыл бұрын
@ hambini - loving your vids and bespoke engineering insight. checking to see if you have any BBs that will interface to a 2020 Ibis Ripmo AF frame and Shimano XT groupset? believe the BB is threaded. first time full suspension rider transitioning from a vintage hard tail mtb. still learning the ropes and will be doing a full build. planning to buy your BB install tool. appreciate your tech consult. keep rock’n 🔥!
@aitorbleda8267
@aitorbleda8267 4 жыл бұрын
Nice BB and bike. Sorry for not sending the badly/well designed YST BB I said I was going to send.. will do it this week.
@timocallaghan4408
@timocallaghan4408 4 жыл бұрын
Would you ever sell delrin go/no go gauges for us to quickly check new frames for being roughly within spec before building up?
@michaelannewarren6082
@michaelannewarren6082 4 жыл бұрын
I like it.
@rcdogmanduh4440
@rcdogmanduh4440 4 жыл бұрын
And thats the way it should be!
@countspokeula539
@countspokeula539 4 жыл бұрын
*Volume down *Play video *Volume up
@MrHcharles
@MrHcharles 4 жыл бұрын
Thanks, nice video, Nice BB, also is that the look bike with a back wheel in? Do tell please!
@totalrepawns
@totalrepawns 4 жыл бұрын
Hambini time !
@arboldechorizos
@arboldechorizos 3 жыл бұрын
Hi Hambini! What are your thoughts on cage bearings against loose bearings for a BB application?? The other day i did a maintenance on my BB and i replaced the caged bearing for loose balls, and now they seem to work better than with the caged ones, but maybe they will need more frequent maintenance, idk
@stevenleffanue
@stevenleffanue 4 жыл бұрын
As your unit doesnt have O-ring seals like Shimano would 'boating grease' be more appropriate as water often gathers and condensates in BBs?
@shanedandy2600
@shanedandy2600 4 жыл бұрын
Nice, but I think I'll stick with the £25 Ultegra BB. Over 10k miles and still smooth.
@olisharp6801
@olisharp6801 4 жыл бұрын
Sounds like you have a well-aligned frame so off the shelf BBs will work well for you. Think the Hambini product is more for frames with imperfect alignment **edit for clarification** from play in the threads.
@MrSuicycle
@MrSuicycle 4 жыл бұрын
@@olisharp6801 That might be true for the classic hambini BBs (for PressFit), but like he says in this video: his threaded BB demands very accurate alignment, otherwise the two parts won't fit together when threading in the cups. So these BSA cups from Hambini won't work in shitty frames.
@rollinrat4850
@rollinrat4850 4 жыл бұрын
Oli Sharp If you want your bearings to work right and last very long with this type of design, the threads and faces of the shell must be properly manufactured and prepped in a professional manner. EVERY 'professional' shop has the proper tools to make this happen, (just not always the expertise!) but they CANNOT SOLVE poor manufacturing and QC issues at the factory level. This is the same problem as with Pressfit shit which can never ever be made right with current production procedures!! These frame prep procedures I mentioned ENSURES ALIGNMENT or proves a lack of manufacturing quality. These are things that ought to be done when the bike is assembled at the factory, but very rarely is, due to greed and the bottom line! Often, even on high end bikes! High quality, perfect and long lasting threaded BBs have existed for decades! Just about as long as bicycles have existed. I own many examples. If you want to see an example of old school perfect loose ball BBs, look at a Sugino Superlap BB in an NJS qualified track bike. Hell, I have an ancient Raliegh with a loose ball cottered bb that spins smoother and quieter than lots of the pressfit shit I come across! Hambini's unit doesn't 'improve' alignment of the shell!!! There is no difference (function wise) between Hambini's and a Shimano bb aside from the bearings used and the serviceability. Can you not see this? How many bearing assemblies have you installed? Am I the only machinist and mechanic who comments here? Gee Whiz!
@julosvlassie
@julosvlassie 4 жыл бұрын
Nice hyper wheels from Winspace :)
@wanopajujumtb4300
@wanopajujumtb4300 4 жыл бұрын
would you recomend this bb for mtb use?
@mrpappa4105
@mrpappa4105 4 жыл бұрын
Thanks , a new 5yr vid. I have been waiting. When will Hambini threaded BB's be available in the shop?
@baker2niner
@baker2niner 3 жыл бұрын
Arrived in 6 days to San Diego (site said backordered) during covid. woohoo. aerospace quality. AKA, the lick.
@sebahattinsaral
@sebahattinsaral 4 жыл бұрын
I like your princess themed table
@patrickharvey3847
@patrickharvey3847 4 жыл бұрын
You are the first to notice this.
@sebahattinsaral
@sebahattinsaral 4 жыл бұрын
@@patrickharvey3847 i really dont think i am
@FerventDissent
@FerventDissent 4 жыл бұрын
If you wanted to only use bearings without a seal, could you make a replacement dust cap that has an o-ring?
@jasonroicatan2879
@jasonroicatan2879 4 жыл бұрын
intro greeting sound is weaker than the others. I wanted my ears to bleed :V jk glad to have you back hambini!
@Hambini
@Hambini 4 жыл бұрын
different mic
@earthstick
@earthstick 4 жыл бұрын
I was thinking about the return to threaded BBs that has started with the likes of Trek. They have gone all the way back to an aluminium tube bonded into the BB that cups thread into. Why didn't they make a aluminium tube that bearings can press directly into, essentially like Hambini's BB here and just bond it into the BB shell? This one is made to replace a HollowTechII BB so the bearings are external to the frame. If someone was designing from scratch they might make it a single part where the external surface is a plain tube and just have internal ridges that the bearings press against. It could be as wide as a current pressfit BB and whatever diameter the frame allows. Is any more required than that?
@YaniofWigan
@YaniofWigan 4 жыл бұрын
Would you consider a campag BSA bb?
@matthewtaylor8727
@matthewtaylor8727 4 жыл бұрын
Nice work Hambini. Hey I’ve got a video idea for you. The new rapide clx wheelset from Roval. 35mm external width in the front wheel with 26c tyres. Love to get the real story on those aerodynamics 😳. Not sure what the best forum or location would be to make the request so I’ve put it here.
@zzzzz1102
@zzzzz1102 4 жыл бұрын
Everyone keeps talking about the new Specialized SL7, I hope this beautiful piece of engineering finds its way onto some handmade Condor, Sarto or Legend framesets. I prefer the aluminium because it doesn’t look like a stock Shimano.
@Demon09-_-
@Demon09-_- 4 жыл бұрын
I have been looking at icancycling's frame set. but was wondering how they stack up to the likes of yoeleo frames
@cyrylski
@cyrylski 4 жыл бұрын
How can we help reduce the price? Coz man, I haven't yet replaced even 10 bottom brackets though my whole cycling life...
@TDZed
@TDZed 4 жыл бұрын
I wish this product was available 2 months ago. I got some Rotor BSA cups, removed the cheap bearings and installed some nice Hambini NTN 6806 bearings (386EVO crank on BB30 shell). Which got me thinking, will the removal and installation of bearings eventually wear the fit in the cups?
@404nobrakes
@404nobrakes 4 жыл бұрын
Tony Diez probably. It’s alloy vs hardened steel. But would you rather wear out a $250 BB (which includes bearings) or your $3000 frame? The Hambini approach is so much better than any other BB implementation that it kind of boggles the mind. How is this not the industry standard
@zPtrck
@zPtrck 4 жыл бұрын
In the long run does the bb make noise on bumbs? Because they'll hit each other? Curious or it's time to service it maybe
@MonMalthias
@MonMalthias 3 жыл бұрын
@Hambini What bearing would be inside an external cup, BSA square taper bottom bracket? I understand square taper cranks are 17mm in diameter so it would be 17mm ID, but I don't have calipers to measure the OD.
@leebridgwater
@leebridgwater 4 жыл бұрын
So is a gxp different, do you make them
@DominikLoeffler1
@DominikLoeffler1 4 жыл бұрын
Could you make a 30mm spindle version of this please?
@noahfontaine7832
@noahfontaine7832 4 жыл бұрын
Couldn’t you make a thread-together bsa bb? Like screw the drive side and then screw the nds in both the bb shell and the drive side?
@davianlomboan2397
@davianlomboan2397 4 жыл бұрын
Hambini my friend, I've missed you. Please keep uploading and keep up the good work.
@timtrial3971
@timtrial3971 4 жыл бұрын
I can confirm that the ring type bb cup tool is much better than the open ended. I bought a shimano open ended one around the year 2000 and it spreads when trying to remove a tight cup and slips on the cup
@miffachan123
@miffachan123 4 жыл бұрын
I wonder if I can use this on my brompton
@240Luismi
@240Luismi 4 жыл бұрын
Brilliant! Have something on GXP Italian threaded? 😬
@AvaPxiaO
@AvaPxiaO 4 жыл бұрын
How about the 73mm width frames, will it work with a couple of 2.5mm spacers? And I assume those are for 30mm spindles, how about 24mm ones, will you make those? Would you sell the shell without bearings so I can fit 24mm inner D bearings?
@helldorado1489
@helldorado1489 4 жыл бұрын
I just bought a Cervelo bike. The Aspera. With the proprietary Cervelo BB. I’ll probably regret it. Damn.
@tweed0929
@tweed0929 4 жыл бұрын
Don't worry. We'll see reaming of your bike by 5 yr old Frenchie soon on this channel.
@AndreasHappyfarm
@AndreasHappyfarm 4 жыл бұрын
I’ve been riding my aspero for a while and it has been trouble free. I’m an independant bike mechanic and I’m pleased with the fit and finish.
@404nobrakes
@404nobrakes 4 жыл бұрын
Get a Hambini BB
@fast.biking_freddy
@fast.biking_freddy 4 жыл бұрын
@@404nobrakes it won't fit coz the concentricity is shite
@404nobrakes
@404nobrakes 4 жыл бұрын
Frederic A. Truslow just use a stronger press and ream the f*ck out of the frame
@blairarthur302
@blairarthur302 4 жыл бұрын
Does the bearing have a direction to be followed ,Sorry about the silly question
@d-vngwenya4043
@d-vngwenya4043 Жыл бұрын
❤️
@milybanily
@milybanily 4 жыл бұрын
Muy educado hoy !!
@andrewpauchnik6208
@andrewpauchnik6208 4 жыл бұрын
Does it work with campy powertorque or ultratorque? If not is there a campy comparable model in the works?
@WeRideSouth
@WeRideSouth 4 жыл бұрын
HamBB. Make it stick.
@Hambini
@Hambini 4 жыл бұрын
LIke it.
@olo398
@olo398 4 жыл бұрын
genius, ez branding for hambini, u should ask for a cut
@WeRideSouth
@WeRideSouth 4 жыл бұрын
@@olo398 I get a cut every time Hambini exposes a low quality manufacturer and makes higher quality products for me to purchase. This saves me money in the long run.
@somewhatfrog
@somewhatfrog 4 жыл бұрын
what year is it? So nostalgic, a retro Hambini video here
@claytonmarkin7863
@claytonmarkin7863 4 жыл бұрын
Do you not grease your crankset axle?
@njm3211
@njm3211 4 жыл бұрын
Is it recommended to put grease on the crank spindle? Thanks
@rollinrat4850
@rollinrat4850 4 жыл бұрын
Every metal to metal contact point on a bicycle should have a proper coating of grease, loctite, carbon paste etc. One of the only points that doesn't is where spokes pass through holes on the hub flanges What to use or not to use on square taper crank spindles was a highly controversial subject way back when! Yes, grease the spindle where it passes through the bearings and grease those splines on the end. Grease or loctite on every bolt. Grease the pedals! Very Light thin coating of grease or carbon paste on seatpost, stem, Steerer, h'bars, saddle rails. All this stuff makes for a quiet bicycle, Easier assembly, disassembly and torquing. Its the professional thing to do. Modern high performance bicycles are noise factories and this is how you avoid it along with not buying press shit BBs. I go through lots of grease wrenching in my shop!
@treimar
@treimar Жыл бұрын
I have an older MTB frame with a 68mm wide shell currently it has a 73mm BB with 2x2.5mm spacers. Which is better 68mm road bb with no spacers or 73mm MTB BB with spacers? Assuming that there are no chainline/clearance issues with a road/gravel BB and crankset.
@BillyB0762
@BillyB0762 4 жыл бұрын
Do you know what boot bracket I can use in 2010 FUJI Nevada 4.0? Thanks
@christophervergara2962
@christophervergara2962 Жыл бұрын
Hello! If my bike has a misalignment. Is it still usable?
@magzire
@magzire 2 жыл бұрын
do you have a video how to install a bb when the frame has no internal threads. my carbon bike came like that and the workshop installed one. just curious
@Hambini
@Hambini 2 жыл бұрын
are you sure it's not a pressfit? they are usually threaded from the factory if they are bsa
@magzire
@magzire 2 жыл бұрын
@@Hambini you're correct
@deadreckoner5276
@deadreckoner5276 4 жыл бұрын
Just don’t get your channel banned. I’ll need to return to this video for the next ten years.
@borano2031
@borano2031 4 жыл бұрын
Everybody deserves a holiday. Some more than others. Next is the scale, ugly words and a rant! Waiting!! Rgr
@nickmannerings3574
@nickmannerings3574 4 жыл бұрын
Neat BB. Turns a threaded BB into a superior press fit BB😂
@runningwithshemp
@runningwithshemp 4 жыл бұрын
Darn I wished you'd offered this sooner. What difference between BB with nylon shim vs metal to metal like Wheel Manufacture, Hope, Enduro (I don't know the specific bearing number off hand). Anecdotally I always had better luck with metal to metal, including dare I admit 1st gen GXP pre-wave washer. BTW between your video on Campy cranks and doing some digging around on Sheldon Brown page. I now absolutely now understand why threaded is an anachronisms is it was designed for cup and cone system and threads set the pre-load. The reason the cartridge Octalink and sq taper (Phil Wood, Shimano UD55) work so well as you pointed out the bearing are pressed onto the axle have superior performance. It wasn't the threading made work better those BB superior. They could have pressed in like a headset and they would have worked just as well, threading was just a convenience. I guess come down fact as long as cranks are two piece vs three piece (like DA 7700 or Ultegra 6500) all these from THM to FSA (and everything inbetween) is gonna under perform and be high maintainance
@TwoDogsFighting
@TwoDogsFighting 4 жыл бұрын
But do they come in go faster red?
@nikolaosstavrou5327
@nikolaosstavrou5327 2 жыл бұрын
Hey hambini I had an 2008 fsa gossamer 2x10 crank and the steel shaft broke clean off from the left side ,and I had a bad crash.the preload was set properly with a torque tool. My Question is this: can the shaft fail like that?.Thanks in advance.
Can Hambini be the #1 Bottom Bracket Manufacturer?
13:33
Mapdec Cycle Works
Рет қаралды 58 М.
I HATED my BB90 bottom bracket ... so I changed it to THIS
20:47
Sportive Cyclist
Рет қаралды 38 М.
Best Toilet Gadgets and #Hacks you must try!!💩💩
00:49
Poly Holy Yow
Рет қаралды 21 МЛН
Викторина от МАМЫ 🆘 | WICSUR #shorts
00:58
Бискас
Рет қаралды 4,3 МЛН
Jumping off balcony pulls her tooth! 🫣🦷
01:00
Justin Flom
Рет қаралды 25 МЛН
Double Stacked Pizza @Lionfield @ChefRush
00:33
albert_cancook
Рет қаралды 111 МЛН
Aero Bike Wheel Buyers Guide | By an Engineer
21:32
Hambini
Рет қаралды 175 М.
Sewage Level Engineering - Hambini BB review by an actual engineer.
11:12
Aligning a Wonky Wilier with the help of a Hambini BB
14:06
Mapdec Cycle Works
Рет қаралды 28 М.
How to cycle with less effort. Bicycle bottom bracket maintenance
13:19
DT Swiss get Completely RINSED BY 9Velo Wheels Ratchet Hub
27:14
The Best Bottom Bracket for every Bike - The End.
9:21
Mapdec Cycle Works
Рет қаралды 171 М.
Convert From Cottered Crankset to Square Tapered Cranks/Bottom Bracket
17:48
Hambini Bottom Brackets And Why I’d Never Buy One.
24:03
Reginald Scot
Рет қаралды 41 М.
Token Ninja BB386 Bottom Bracket Fitting Guide
12:07
Free To Cycle
Рет қаралды 25 М.
Елдос жылап тұр: Эмоцияға толы марапаттау сәті
8:45
Qazaqstan TV / Қазақстан Ұлттық Арнасы
Рет қаралды 165 М.
ngày 23 tháng 7, 2024
0:18
Soccer TV
Рет қаралды 4,3 МЛН
РЕЗУЛЬТАТЫ КАЗАХСТАНА
0:29
Travelove 100
Рет қаралды 19 М.