Get your DeWalt battery chainsaw here: amzn.to/3YADDTT

Hank you and Wiley are the best u always have awesome content on the old trucks and equipment God bless and stay safe

I think you guys are the ones that can get it done 👍

I'd like to see that cut a tree. Too bad they don't have one to sacrifice for a demonstration. Good job Hank and Wiley!! Can't wait to see it run and move! Thanks for sharing! God bless! 😎👍

That’s a Tigercat you can’t kill em. But the hour gauge it flips ever 9,999 hours and it’s still in good shape no doubt about it, but it’s likely to have 13,550 hours not 3,550 hours. I had one that burnt twice flipped over three times and when it finally died it had over 30,000 hours lol. Tigercat is a good quality machine and last forever not like a John Deere overly expensive and can’t get parts for a reasonable price

I’m 81 and you guys make want to start a new trade. Just started watching about a week ago and really enjoy your channel.

There’s just something funny about rescuing a 50,000 lb tree shear stuck in the brush using an electric chain saw. Keep at it, great content. 👍

Hank, You and Wiley have the best KZfaq channel out there!!! Keep it up brothers!

This ole tiger got put up way before her time was up. Just from what I saw, I think she’s in better shape than most. With a little work she could be a nice dependable rig. Thanks guys I enjoyed it.

Good job, guys. Hank and Wiley are awesome guys. I appreciate you

We love you all ...from BC Canada bros!!!

Thanks guys.

Hi Guys - just checked out the store - where can I find Wiley’s YES hat? You guys need to add that to the store. And maybe a NO one as well. I could use them for staff meetings! LOL Keep up the fun vids!

I worked for a computer software company and had to work all night for the Y2K fiasco - nothing happened out of the ordinary but we were manned.

You guys ever heard the phrase, "The blind leading the blind",.. lmao xx Love ya guys you make me laugh.. xx

We never to old to learn .Great video The 2 of you are a mean machine.keep it up.

Thanks for another great video. It was interesting and enjoyable. You guys did great. She ran immediately. Great going. Nice unit yet. Low low hours. Thanks The Iowa Farm Boy.

Just a idea to tote your batteries. Get a hand truck weld a couple of battery boxes to it hook your batteries up and use a set of jumper cables to it and just roll to the area. C clamp's would probably work better than vice grips to hook up.

Vice grips? Good grief Wiley, they’re “Emergency Axillary Battery Clamps” 😉 🤣🤣🤣

I like watching your videos, you guys are great👍These machines are just so impressive, and the 1999 model engines still sounded like real diesel machinery🙂

Awesome morning brothers !!! Great to see yall again !!!! Just got to the house from work will watch all of the video when I wake up lol

Hank you needed a small stool to sit on while you we’re blowing up the tyres ❤❤😂😂

Engine sounds GOOD ! Fired right up.

Great video Hank and Wiley, that skidder sure did fire up easy, sounds and runs great too, God bless 👊👊

Great watching you guys again so much fun one of the best video

too good hearted old boys Write down Earth I love your guys show

Guys(and sweet gal) one part of the goodness of this show is the mistakes and fumbling rapport. That is what made youtube so popular in the first place. Things were Real. Now with all the channels trying to be so irreproachable and slick, it's like watching a tv show. YOu guys have authenticity and that's what keeps me coming back. I must represent at least 60k if your veiwers sensibilities. And I'm a yankee intellectual who knows nothing of these machines but watch this as treat when I can.

Excellent video Hank

Looking forward to the return trip great watch gentleman 👍👋🇨🇦

You guys fit together good. Comfortable enough to jazz each other to have a good time at whatever kind of mess you stumbled in to. Older and wiser, chipper and fitter but yall ought to think about finding a rungitusa. Pass the torch on. Now dont try to tell me that old vinyl caused 27:13. Wapner, 4 o'clock, definately.

Ritchie bros auction would love this machine

God bless you Hank and Wiley!

I LOVE the intro music! It gets me fired up to watch the video. I also enjoy the preview of the next video with the cool music. Keep up the awesome professional videography. Your viewers deserve the best and you deliver!

Nice work there 👍👍👍👍

I think 🤔 that both of you are very mechanical ⚙️ talented to be able to work on all types of tractors 🚜 I like 👍 to see that you’ll get them running 🏃‍♂️ and get them put back in service the both of you have a great day 😮

Hello Hank, Cool video great job. Be well

Hank and Wiley are like peanut butter and jelly really enjoy the videos guys god bless !!!

This is the first time watching your channel that I know exactly where you’re at

Put these persimmons in the freezer for one day and they are delicious! Tom 😎

Enjoyed this video Hank and Wiley.

Gracias por sus videos saludos desde Mexicali BC México

Awesome job fellas!

Very good job and God bless yall

Looks almost like new

A buddy of mine and I are doing a "Will It Start" on a old late 70s Ford 1600 out here in Northern California. We're only a couple of hours into it but it's looking promising. IDIG62

I drove that same model and year up here near Flagstaff ha4vesting timber out of the Coconino National Forest...those were hot dry summer days and we started at 4 am to avoid starting fires. Hard work, but i got darn good at it

Awesome , seeing an air Compressor !!

Boa tarde Muito ótimo esse serviço máquina meu amigo

Looks like you would have the air hose setup up for Wiley to help him out

Good video Hank! Still enjoy you and Wiley firing stuff up

Дякую за любов до стареньких авто

Teasing us with a preview 👍😝

Thanks!

I. LOVE. TO. SEE. THIS. VIDEO.

I love heavy equipment!!

Hey Hank you do know they make adapters for those stud type batteries to change to clamp type terminals.

I thought the Tigercat was supposed to cut down trees 🙂 Y2K drove the computer industry a bit bonkers you bet I remember. to me 5/05/xx means May 5th of xx The o5 means 05, 15, 25. Reserves two digits.

I know people out there screaming you hitting the battery with that hammer lol

I remember Y2K all too well. I was Chief Engineer for Holiday Inn and I had to stay all day & up until just after midnight to make sure all systems were working properly. It was not fun at all.

I knew you guys could do it

Ya know my dad usta use a dob of red grease on battery terminals... made Fer a good connection and also combated oxidation 😁👍

The Air Checker Hank ! Lolol

Hank you don't need a step ladder you need one of those letters that collapse and grow up the 20ft and a nice hand truck to carry batteries around on alright this is Bob from Vero Beach Florida God bless have a safe week stay warm and keep up the good work with you and Wall-E

The Cool BROS good to see you guys

that machine is a GEM in the rough. replace all hydraulics, oils, filters, tyres, it will sell !!

good job👍

Hank, you should get one of the Stihl or echo combi system with the batteries. A hedg trimmer would make easier work of those vines and stuff better then a chainsaw. Love you guy!

Millenium night I was driving my East London-based Minicab (unlicensed taxi) and we were all geared up for a very busy night here In the UK, will the world crash?/ nope, it was such a warm night most people partied then walked home saying - WE WILL NEVER GET A CAB TONIGHT - lol was a complete disaster alright, hardly got any fares - lol So, that night made me give up driving a night cab forever.. I laugh when I look back now though. Thanks for the video guys. Ian - UK.

Wiley for God's sake make sure you're getting money working with Hank, you're going to lose fingers at some point, sorry I couldn't resist, yet another great video guys, keep up the good work.

That one may have a front and back foot control to move it around I've been around only 1 we had those bell cutters back in the 80s

I was 26 for y2k. Always check the air filter and intake for animal nests.

amazing

I remember Y2K! bunch of Shat that was, all Banks loosing track of Folks Fundages and It was The End of the World as we know it! 😂 it was a Pleasure as always, I’ll catch you on the next one. Keep it Safe Out There Fella’s

Good one 🤣🤣

Yup Y2K they sold a lot of computer software for windows great video Hank and Wylie thanks

👍🙄 good job

Looked like Wiley hurt his gut getting them vise grips😮

Y’all need to get some stud to lead post adapters for those batteries. I think it would make life a lot easier for you.

Ya need ta come too Australia South Australia eye opener

Hank, did you do your risk assessment for this project and how did you arrive at your assessment

Left one should be ur steering right one should work the head and foot controls works the clam arms

Yeah I remember that hank

Defiantly know about that hole in the drivers seat

Eddy money awesome!!!!

Hanks the feller and Wiley ends as the skidder. Hahaha

I bet Wylie is in love that is a nice clean machine . It needs to be saved. Thought that was pronounced poo Natick

wasp spray is a must on that job!

Git 'Er Done! I think this video should be called the Hank and Wiley Comedy Hour. Love the humor and good nature poking fun at each other. But, I don't think you fellows have it to make it on the midnight five finger discount auto parts channel yet. I think you need more vice grips! Did ye ever wonder about Y1k? Nothing happened there either. The rock hammers and chisels worked fine back then.

Good to See You Hank & Wiley, Howboutcha Fella’s???

Tigercat made in my home town in Canada

Serious pucker factor right there… “puckered up so tight couldn’t drive an 8 penny spike up there”

That compressor should pump that tire up pretty quick I don't know what you guys got going on there let's hear on the regulated side of the Compressor Well I'll be figured out 8 hours A-day 50 50 weeks a year that's 2000 hours I think almost is brand new Thanks for the videos always a good time

Puckered up

I have a 18 volt Makita cordless sawsall with 5amp batteries I have cut down plenty of big trees down with it no problem, Milwaukee makes an amazing set of blades one called the AXE is 12 inches long and works so good ...I climb up the tree with a rope tied to the saw, and to me then I pull the saw up after me cut down the smaller limbs first and be rotating around the diameter of the limb and using gravity as a tool I can take down a lot larger than 12" ...I am on the lookout for longer blades that are just as good as the Milwaukees but haven't found anything yet... I also tore down a 80 year old building the other year the nails they use back then were real steal and the carbide bi metal wood blades Milwaukee has are like cutting through butter with a hot knife 👍👍👍 I never had to replace one of those blades yet. But I do have several just in case...cause that's what I do. And also one 5 amp battery lasts about 30 minutes of straight cutting time. I don't know what I'd do without these tools. But I do have hand saws and gas saws that do work just not as handy. 🙂

I do know that would have been a expensive piece of kit i watched swamp loggers 😂

Back on another backhoe loader

Hay it runs but hay big guy does it move and does the fellbuntcher head work.

Jeez hank,you had to use a persuasion stick(hammer) ol wiley uses nothing and gets the panel off easy lol,the hydraulics wasn't working cuz of no oil or blockage in the lines

i worked for Dupont chemical during Y2K.........they had every engineer in the place there... they were afraid we would loose control and they though the place was going to blow up..

There's a logging outfit in Louisiana that has that same machine,maybe he'd be interested in purchasing it