Hand-Pouring INJECTION MOLDS...Soft Plastic Lure Making

Рет қаралды 44,989

4 жыл бұрын

Affiliate link for AWESOME Pigments:
www.dipyourcar.com?ref=774
Welcome to the World's Worst Fishing! We are a fishing-centered TV program that does its best to bring you great fishing content & soft plastic bait making tutorials! We hope to provide our viewers with content that is fun, creative, informative and most of all entertaining. Sit back and watch us bring you the world's worst fishing!
We make fishing lures and soft plastic baits. You will find lure making tips and techniques as well as mold making tutorials and color ideas for your lure making
Warning: Making Soft Plastic lures can involve high temperature liquid plastic under pressure and is inherently dangerous if spilled or mishandled. Proceed making lures at your own risk.
Visit us on Facebook & Instagram!!
LIKE & SUBSCRIBE
#fishing #outdoors #handpouring

Пікірлер: 270

@WorldsWorstFishing 4 жыл бұрын

Which were your favorite?? Thanks for watching!

@minus_IT 4 жыл бұрын

The first ones that you made were great!

@chriswren3636 4 жыл бұрын

Black and green then the last ones turned out awesome. Should try some black and orange they should swirl great

@landonwest4701 4 жыл бұрын

Swirled senko was awesome! So much could be done with that

@bradleyflowersoutdoors6218 4 жыл бұрын

That laminate attempt looked really cool along with that brighter green second run

@lelandhenryfishing4870 4 жыл бұрын

Definitely liked the worms.

@user-jt2tw1xx2l 2 жыл бұрын

*I used to fish with a Crippled Killer growing up in the 50/60’s and **enjoyable.fishing** recommend think this lure gas a smoother propeller action. It is a great surface lure.*

@garrettswanson6502 4 жыл бұрын

the first worms with the dead on plastics lime look like wood grain, really cool looking

@WorldsWorstFishing 4 жыл бұрын

Yeah u are right about that

@glennluteraan4434 4 жыл бұрын

I'm really happy you showed that this can be done. It allows newbs, like me, that you can start small and work your way up to investing in the injector, but that the injection molds are not useless without an injector. Good stuff!

@WorldsWorstFishing 4 жыл бұрын

certain ones work well

@phrogginator 4 жыл бұрын

It’s spike from Instagram just wanted to say thank you again for the recommendation and all the help

@WorldsWorstFishing 4 жыл бұрын

Thanks for watching!

@01Brever 4 жыл бұрын

Always entertaining buddy! I like the black and green worm the too. The one with more green than black is my favorite! Can’t wait until the next video. Appreciate ya!

@WorldsWorstFishing 4 жыл бұрын

Thanks man...

@michaelwolthusen8293 2 жыл бұрын

Great insight for beginners as well as the most experienced bait makers out there.

@williammitchell9300 4 жыл бұрын

Really Great Show Chris and the Green was the Bomb Love the way the Blood line Show up , Tight Lines My Friend

@WorldsWorstFishing 4 жыл бұрын

hey thanks bud

@pimpshack81 4 жыл бұрын

You’re a mad scientist .. but killing it 🤘🤘🤘

@WorldsWorstFishing 4 жыл бұрын

thx preston

@DeeDee-vu5mi 2 жыл бұрын

Great vids as always. I have the AI 4in swimbait with top injection ports for each. I still have issues getting this mold to laminate properly. Great single color baits with the eyeball mold though.

@kennethc5223 4 жыл бұрын

Interesting way to do it. Green and black but liked that blue color turned out nice. Thanks for the lesson.

@WorldsWorstFishing 4 жыл бұрын

thanks for watching

@chriswren3636 4 жыл бұрын

Awesome job on the baits

@WorldsWorstFishing 4 жыл бұрын

Glad you enjoyed

@gabifishing642 4 жыл бұрын

Nice job well done

@jimcoleman4558 4 жыл бұрын

The stick worms came out sweet. Gonna definetly give it a try

@heyjohnson5535 4 жыл бұрын

That purple and blue looks amazing completely jealous and need to start making my own

@WorldsWorstFishing 4 жыл бұрын

Jump in!

@newcrankeeworkshop 4 жыл бұрын

freaking awesome

@BaltaPescayAventurasElTataBelo 2 жыл бұрын

tnku master i have learn so much whit your videos very soon i will have my Mold to directly from eangling AI and Deat on Plastic

@UWPcustombaits 4 жыл бұрын

You inspired me to buy my first mold and I got some dead on plastic on the way, can't wait to catch a fish with a bait I made myself!

@WorldsWorstFishing 4 жыл бұрын

helllllll yeah

@zootycoon246 4 жыл бұрын

I’ve been doing it for three years now! It’s still addicting!

@tracynewman5246 4 жыл бұрын

Good vid I’ve been hand pouring half the mold (sinko) then inject diff colors on top don’t have the duel injector yet it does work just time consuming you could skin pour some of the swim baits then inject maybe a vid as well thanks

@TheTrashologist 4 жыл бұрын

I would like to see you trying to catch a fish using the runner for the bait.

@warlockfreak89 4 жыл бұрын

The really bright green was great, it looked like predator blood

@WorldsWorstFishing 4 жыл бұрын

If it bleeds, we can kill it

@minus_IT 4 жыл бұрын

Awesome! I wish I could find one of those mixing cups.

@WorldsWorstFishing 4 жыл бұрын

ill do a video on how to make one

@bomoaccavallo7924 4 жыл бұрын

love those green ones

@brycehodapp6144 4 жыл бұрын

Make a video on the colors bluecrawl or pb&j

@WorldsWorstFishing 4 жыл бұрын

ive done both! check em out

@DeChane369 4 жыл бұрын

Those came out great! I really like the bloodline swimbaits. I can't wait for my mold to come in!

@WorldsWorstFishing 4 жыл бұрын

Good luck!

@DeChane369 4 жыл бұрын

@@WorldsWorstFishing I'll need it hahahaha. They have to manufacture it before sending it out so I'm willing to bet it may take a full month at the very least for me to get one with all this coronavirus

@MrMarrok657 4 жыл бұрын

since i use more swimbaits than anything, i’m probably gonna order those top fill swimbaits. i got some neat colors in mind. the dead on pink with their green. both those colors work in my waters and should make for an interesting mix. another brilliant video man loved it!

@WorldsWorstFishing 4 жыл бұрын

It's an awesome mold..he has it in 4,5 and 6"

@MrMarrok657 4 жыл бұрын

World's Worst Fishing now heres a question ive been pondering. would heating the mold up with a torch or other heat source before pouring help the plastic flow into the lower cavities of those worm molds? if it cools down too quickly that could be something to help.

@loganbohannon7963 4 жыл бұрын

Can't wait to get my blood line molds in ordered them 2 weeks ago with some other molds from bts and do it molds

@WorldsWorstFishing 4 жыл бұрын

Hell yeah

@gurohyena3649 4 жыл бұрын

Like green and black is my favorite color combo in general so also in baits for sure. I have some really cool silver star shaped glitter that I think would look really cool in a swirled galaxy color scheme. 🤔

@WorldsWorstFishing 4 жыл бұрын

i wanna get some star glitter ha

@landonwest4701 4 жыл бұрын

Awesome video! I am so pumped up and excited to start hand pouring some of my molds! Would pouring in a hot mold or on a hot plate help? Maybe worth a shot. Keep it up man! 👍🏼

@WorldsWorstFishing 4 жыл бұрын

Extra heat never hurts

@Tam58851520 4 жыл бұрын

Chris, I'm curious if you got the griddle out and pre heated the frog mold .. would it work better? Could you do punch bugs with a heated mold? Awesome video as always, thanks for the knowledge and entertainment.

@jeffs3376 2 жыл бұрын

Have you revisited this and tried to pour some of the harder molds on the hot plate?

@youroutdoors5453 8 ай бұрын

Have you ever tried to pour side walls on the blood line series then inject it to add another layer element as well as another color?

@danielwood2134 4 жыл бұрын

Loved the green swirl but I thank i like the swim baits better

@WorldsWorstFishing 4 жыл бұрын

Good choice!

@liprippertv3956 4 жыл бұрын

You should do the black and green in a craw bait

@cauyrodenbaugh938 4 жыл бұрын

Thank you answered my question I’m just starting and was gonna wait to buy a injector because of how expensive they are thank you

@WorldsWorstFishing 4 жыл бұрын

Glad I could help

@terenceparrish6292 Жыл бұрын

GREAT IDEA FOR A VIDEO!!!!!! You have answered a question that has been swirling around in my head. I have been wondering if this would work, I have some worms that I want to melt down, and pour into a larger size mold. Do I need to add anything, or can I just do a remelt, of my skinny worms and pour the hot results into a senko mold?

@hunnerhall2322 4 жыл бұрын

Watching these videos made me get into soft plastic making

@WorldsWorstFishing 4 жыл бұрын

so glad to hear!

@ryanlynch3418 3 жыл бұрын

Dumb question but how did you do the divider cup for the stick worms

@claytonhiland9518 2 жыл бұрын

Chris bring your molds up to temp before pouring. Should work fine.

@avifreed5243 4 жыл бұрын

Those green and black senkos look killer!

@WorldsWorstFishing 4 жыл бұрын

they actually came out nice ha

@avifreed5243 4 жыл бұрын

@@WorldsWorstFishing Those would be destructive by my everglades spot! And those swimbaits!

@jhgadventures 4 жыл бұрын

I like those first ones alot. I'm ok with the black swallowing the green a bit. More of a natural feel.

@ndistefano5 4 жыл бұрын

Man that Purple was a cool color, but I think my favorite was that watermelon laminated over the pearl bottom

@WorldsWorstFishing 4 жыл бұрын

thanks Nick

@johnzambito7389 4 жыл бұрын

Love the baits!! I would love to be able to buy some!! Where do I get them?

@SmartcastMTG 4 жыл бұрын

I got the opportunity and pleasure to work with Ed Freytag, your videos always remind me of those times haha.

@WorldsWorstFishing 4 жыл бұрын

Percussionist?

@SmartcastMTG 4 жыл бұрын

@@WorldsWorstFishing Wrote the rudimental cookbook

@WorldsWorstFishing 4 жыл бұрын

@@SmartcastMTG I knew I recognized the name! That's awesome sir

@informativecontribution2371 2 жыл бұрын

Where did you get that divider for the pyrex?

@selfr50 4 жыл бұрын

Cool man. I pour my injection molds!

@WorldsWorstFishing 4 жыл бұрын

Right on

@averybrown7878 4 жыл бұрын

Have you ever looked at a milk frother to mix up pigments??? The knife method looks good but the milk frother would be good to mix it up quickly if you were in a rush

@averybrown7878 4 жыл бұрын

It might add too many bubble though... not sure but it’s worth a try!

@FranktheTank319 4 жыл бұрын

I'd like to see you catch a fish with the waste piece/runner. That would be funny. Just a chunky cylinder on a hook.

@spencerdavis1341 4 жыл бұрын

keep it up and you might not get your laundry done for you much longer 😅 nice baits tho thanks for demonstrating the potential for this method!

@WorldsWorstFishing 4 жыл бұрын

hehe

@TimIrvin 4 жыл бұрын

I grew up fishing a GRAPE curly tail worm - 6". I had so much confidence in them. I could ALWAYS catch a fish. ALAS, it seems that GRAPE has been lost forever. The purple you used reminded me of it but it's not GRAPE!

@WorldsWorstFishing 4 жыл бұрын

you can get black grape color and use it lightly and get an old school grape worm..give it a try!

@coolgrant100 4 жыл бұрын

Hands down the swimbaits were sweet, I fish a lot with a lot of friends if you have spare baits and random stuff I’d like to buy a variety pack. I’m sure you have bunches laying around I don’t mind paying for a box of variety it would be cool to try some of your stuff out along with the crazy and cool colors.

@kollmesser9537 4 жыл бұрын

You should use the runrr as a bait

@815aquariumfish6 4 жыл бұрын

Great video where did u get that cup Divider at

@lucasstrasser4178 4 жыл бұрын

You should try to catch a fish with the runners

@BartonHNewell 4 жыл бұрын

The ones at 19 minutes have a super familiar feel to an old Senko-style bait I use to fish that was more of a mustard yellow/ watermelon "cow" pattern. Super killer to fish weightless wacky rigged.

@WorldsWorstFishing 4 жыл бұрын

sounds like an old school color no doubt

@Joseph-hi3cy 6 ай бұрын

Maybe heating up the mold with a heat gun before pouring? Idk I’ve never done this. I plan on it.

@kirkamerson2756 4 жыл бұрын

Thought they were all pretty cool.

@WorldsWorstFishing 4 жыл бұрын

thanks kirk

@bluemaixma04 4 жыл бұрын

Whats a good start up kit out there

@chrisdorn6418 2 жыл бұрын

Love the PataFlaFla Awesome LOL

@WorldsWorstFishing 2 жыл бұрын

Once upon a time I could lay the chops down LOL

@MagicianFishing 2 жыл бұрын

👌👍

@justinsteele5665 4 жыл бұрын

That blue in a core shot with the clear and copper flake that be a pretty bait

@WorldsWorstFishing 4 жыл бұрын

dude a great idea!

@justinsteele5665 4 жыл бұрын

@@WorldsWorstFishing just waiting on the video🧐

@marlojohnston4217 4 жыл бұрын

Love these!!! How can I order these from you? My husband would love these, just as much as I do!! I love your channel and you're so very talented!!! Tight lines🐟

@gavinware1039 4 жыл бұрын

where did you get your finesse crawler injection mold?

@darrinmyland6497 4 жыл бұрын

The second one with brighter green almost looks like wood grain. EPIC!!

@WorldsWorstFishing 4 жыл бұрын

haha yeah it does!

@kbody_slade 4 жыл бұрын

I would like to try Texas rigging the runner

@WorldsWorstFishing 4 жыл бұрын

yeah might work

@jeremynewhouse6530 4 жыл бұрын

Would heating the molds and maybe angling them so the plastic runs down hill in the worms help. Just a thought I had while watching

@kevinlincez7288 4 жыл бұрын

After watching some of your videos, and then the way you started this vid, I was thinking about a weird injection method- using a top down bait mold and using the double injector you would slowly spin the mold while injecting the plastic getting a barber pole type pour. Prolly useless for fishing but would look really cool, if possible.

@WorldsWorstFishing 4 жыл бұрын

it doesnt swirl the way you think it will

@kevinlincez7288 4 жыл бұрын

Damn!! But it woulda been cool

@vagoart3067 2 жыл бұрын

i think your supposed to keep it as still as possible so it goes in evenly and get the green better the other time you shaked little to much mixed basicaly the black with the green on the way in

@thekemplarfiles 2 жыл бұрын

Where did you get the Molds made? Ty

@riccochet704 4 жыл бұрын

when you put those first baits in the water the contrast popped....at least thats how the camera picked it up

@WorldsWorstFishing 4 жыл бұрын

it does that...always better in the water!

@pol-ek3yq 4 жыл бұрын

Im a new sub , u sell lures?edit.: those purple gulps with the silver veins are out of this planet good job bro! Damn worldbestluremaker

@charleshall3420 4 жыл бұрын

I really liked the worms

@WorldsWorstFishing 4 жыл бұрын

thanks man

@Jacob..m 4 жыл бұрын

19:30 googan should make that color in the lunker log because it is there colors

@rossestep338 4 жыл бұрын

It looked my the liquid pigment in the first worms was extra thick at the beginning, maybe that’s why there was a green piece left. Also, you should use one of the marbled pour spouts that you typically remelt to try and catch a fish! Haha

@WorldsWorstFishing 4 жыл бұрын

yeah would be a fun challenge

@henrybarber7087 4 жыл бұрын

Hand pouring can also take tones of bubles you stir in

@lawrenceglr 4 жыл бұрын

What temperature would u recommend for the Plastisol to be at while hand pouring injection molds?

@nicolewilkes4625 2 жыл бұрын

What brand plastic do you use? Also for the senkos do you use soft or medium?

@thomashowes1973 4 жыл бұрын

Why not preheat the molds on your hot plate to get the plastic to flow further on the molds with more limbs or pockets?

@kennycantin3872 4 жыл бұрын

Those last bloodline swimbaits with a black bloodline rather than a green one would make a great baby bass imitation. Great video as usual!

@WorldsWorstFishing 4 жыл бұрын

yeah big time baby bass!

@kennycantin3872 4 жыл бұрын

@@WorldsWorstFishing I airbrush hard baits and do a baby bass pattern that looks very similar. Ready to start pouring soft plastics now.

@lelandhenryfishing4870 4 жыл бұрын

Would heating the molds on the griddle help get the plastic into the smaller appendages?

@JWard-sp7wt 4 жыл бұрын

I wonder how little squeeze bottles would work with drawing patterns on skin pours, would it work like a pen?

@WorldsWorstFishing 4 жыл бұрын

no idea

@AddictedAngler 4 жыл бұрын

I think if green was hotter few degree would over power black , what do u think

@Kayakphotography 4 жыл бұрын

Maybe you could use a “plunger” to push into the hole to push the plastic into the smaller parts. Just a thought.

@WorldsWorstFishing 4 жыл бұрын

you could...but I wanted to see which ones would truly hand pour

@stevenreep385 4 жыл бұрын

Wonder if you can put it on a hot plate like you do the open pour swimbaits and keep the plastic cool enough to finish those finesse worms you had? Just a thought

@WorldsWorstFishing 4 жыл бұрын

it might help for sure!

@sakfpv8444 2 жыл бұрын

I think for hand pouring these injection molds, the mold should be heated up to 350 or so the keep that plastic moving...I would think, I have no clue really, I just started, but I can't imagine that heating the mold wouldn't help.

@cloudy7773 4 жыл бұрын

Beautiful baits but I Was wondering if you heated up your molds if the plastic would flow further into your molds

@WorldsWorstFishing 4 жыл бұрын

it probably would..but wanted to show that you can do it without the heat

@m_englund7574 4 жыл бұрын

If you crack the molds in half and then hand pour you can get a laminate, if you have say something like a frog mold with thin legs you could pour a belly color then inject the rest

@WorldsWorstFishing 4 жыл бұрын

oh yea...used to do that some..have to get the mold really hot to get a decent bond doing that tho

@09ChiefMaster 4 жыл бұрын

Wouldnt it be better to have the molds on the griddle to help it flow?

@southernoutdoorsmen1243 4 жыл бұрын

I'd call that second attempt at green and black "green smoke"

@kennethbrown3853 4 жыл бұрын

Would love to see the hand pour in a morning dawn to see how it turns out

@WorldsWorstFishing 4 жыл бұрын

i love morning dawn

@kennethbrown3853 4 жыл бұрын

@@WorldsWorstFishing One of my favorite go to's

@krabrangoonies1071 4 жыл бұрын

I have the same washer machine B)

@WorldsWorstFishing 4 жыл бұрын

haha nice

@Invalid06 4 жыл бұрын

Can you make lures for saltwater fishing

@audreydamours6226 4 жыл бұрын

question like that .. im a machinist and im planning making a mold for stick worm .. but for hand pouring i will cnc my worm at a 30% angle soo it will be easyer for the plastic to flow all the way because i will not use pressure like injection .. is that a good idea ??? sorry for my english

@mre4875 4 жыл бұрын

Kinda weird at how fun that was to watch. Gonna make for some weird re-melts too.

@jamesmalone7773 4 жыл бұрын

Have you thought about warming up the molds when you are hand pouring?

@WorldsWorstFishing 4 жыл бұрын

I do that every time when I am pouring an actual open pour mold

@richshackelford5793 4 жыл бұрын

Like all of them I would fish with them

@WorldsWorstFishing 4 жыл бұрын

thanks rich

@1222harv 4 жыл бұрын

Could you put the frog mold on the heating plate?

@WorldsWorstFishing 4 жыл бұрын

might help a little but gravity will prevent it

@pikeevans8559 2 жыл бұрын

What would happen if you preheated your mould just before you poured the frogs?

@davidbonnee4566 4 жыл бұрын

what do use to divid the cup

@sladojt0537 4 жыл бұрын

I want to start soft bait making but don’t know what the total amount I would need to buy all the things I need

@hannable3871 4 жыл бұрын

I can tell you not to use the microwave in your house it smell like hell and I wouldn't recommend using it for food after it will taste like hell also. But really it dose take a hole lot I carved a swim bait out of some balsa wood and made a mold with silicone mold with stuff from hobby lobby and poured with old plastic bait that were junk. You should check out marling baits on KZfaq make almost all his own stuff it's real cool.