Рет қаралды 3,888
Today I will restore an old hand saw and turn it into a useful and also decorative object.
I hope to surprise you with the final result of this project and its use.
This old carpenter's hand saw had a crooked blade and it would not have been optimal to use it for its purpose, so I decided to transform it.
For the rust removal I used a 3% citric acid solution and then cleaned the blade with a fine steel wool to maintain a vintage look.
The handle was sanded with 80 and 120 grit and for the finish I used water-based dye and wood wax that give it a retro look.
The recovery of old work tools always gives me a lot of satisfaction and gratification, I hope you enjoyed my work, I had a lot of fun, especially creating the intro and the outro.
Thank you for your time, consider support the channel if you liked it.
You can help the channel by subscribing, comment and like the video, and also visiting www.buymeacoffee.com/LTMS
Related videos: (other restorations I made)
- Ratchet screwdriver restoration • 70 Years Old Ratchet S...
- What's in the drawer? (vintage chiesels restoration) • "What's in the drawer?...
- Vise restoration • I've got a new vice (a...
- Reversible dovetail saw restoration • Reversible Dovetail Sa...
Timecodes:
00:00 - the problem
00:42 - the possible solution
01:28 - disassembly
03:27 - acid bath
04:27 - handle recovery
08:08 - painting and finishing of the handle
09:24 - polishing of the fixing screws
09:58 - a few extra pieces of wood
10:30 - cleaning and finishing of the blade
12:36 - reassembly
14:37 - the solution