Hands-on With The CLS60 Force Feedback Yoke | Is It Worth $799?

Hands-on With The CLS60 Force Feedback Yoke | Is It Worth $799? | Tested In MSFS!

Рет қаралды 16,374

Күн бұрын

A new entrant in the Force Feedback Yoke market, Flitesim.com is soon to launch the CLS60, a fully featured product with multiple configurable options. This is my first look at the product.
Referenced Links:
Flitesim.com CLS60: flitesim.com/
Support the channel so I can continue to bring quality content to you:
✈ You can donate here: www.paypal.com/paypalme/simha...
✈ You could also buy me a coffee here : www.buymeacoffee.com/SIMHANGER
Chapters
00:00 Intro
05:01 Getting Started
10:02 Realism
14:33 Flight Test 1
22:24 Flight Test 2
26:58 Flitesim.com
28:48 What You Get & Specs
32:51 Final Thoughts
SIMHANGER KZfaq Channel Link: / simhangerflightsimulation
Join Simhanger on Discord: YOUR DISCORD INVITE: / discord
For more details visit Simhanger Website: www.simhanger.com
Connect with me on Facebook, Instagram and Twitter: @Simhanger1
Looking for help with MSFS, then check out my HOW TO GUIDES, link to playlist here: • MSFS HOW TO GUIDE
MSFS on Xbox playlist can be found here: • MSFS on XBOX
✈ Get the best head tracker - Tobii Eye Tracker - 5% Discount Link (affliated): tobii.gg/simhanger use code simhanger (exactly as shown) to get your discount.
✈️ VR Pilots, need prescription lenses? Link to VR WAVE : bit.ly/SimHanger-VRWAVE ? Get 5% discount by entering in promo code simhanger (all lowercase) at checkout, (non-affiliated).
Thanks for watching
#microsoftflightsimulator #msfs #flightsimulation #vr #forcefeedback

Пікірлер: 191

@lvx4408 2 ай бұрын

Its okay to laugh and show emotion, my friend. Dont apologize for it! It actually makes the videos more relatable and enjoyable

@SimHangerFS 2 ай бұрын

Hi all, hope you enjoy the video. I enjoyed making it! 😂 This product offers a great mixture of realism & gameplay elements to produce a very immersive experience. Point of correction - the Cessna elevator trim is on a tab and the elevator would not drop at 0kts on the ground on a real aircraft. Developer will update the config to disable this in a forthcoming update.

@julianhall2008 2 ай бұрын

I have had my Brunner now for around 6 months, after flighing ffb there really is no going back. Tweaking the profiles for the different aircraft is needed with the Brunner, there are pre made profiles on the Brunner cloud that other users have saved that act as a good starting point. The landing challenges are fun. The price is so good, I paid a lot more for my baby Brunner. Always vat at 20%, certainly for the eu from Switzerland.with reference to mounting on your motion rig. I have a p3. I bought some steel plate from Germany it comes in various sizes and they can cut it to specific sizes I bolted that to the rig and attached the brunner to that.if you would like a picture mark let me know.

@SimHangerFS 2 ай бұрын

@@julianhall2008 I was thinking exactly that, I need an extension plate.

@guillaume_69 2 ай бұрын

You certainly enjoyed yourself 😄 Personally I think I still favor using the butt kicker, because I can use it for all types of aircrafts (airliners included) . I prefer to have the vibrations and other effects in the chair. That said it's because my GA yoke is an all metal, heavy duty one, which is very realistic. Most yokes are light and flimsy and that indeed kills the immersion. For people who fly exclusively GA aircraft this might be great value for money indeed.

@gregh335 2 ай бұрын

Mark, I just wish to say your channel is by far the best one out there. Your offerings are so professional and informative to us simmers. I hope to bump into you at FlightSimExpo...and test out this Yoke. All the best! Greg

@SimHangerFS 2 ай бұрын

It would be a pleasure to meet up and say hello 😊

@SparkySven 2 ай бұрын

I fully 100% agree with possible immersion what we GA plane lovers can't get enough of. It's pricey and needs to be plug and play for MSFS2020 / 2024 without any thinkering at that price point. What will happen I hope but it's looking very promising.

@q8386 2 ай бұрын

Looks like a gamechanger, Mark. I'll need to trade in my TB V1 Yoke, but I need this in my sim. It's all about the realism, baby.

@ztublackstaff 2 ай бұрын

OMG😊 I need this in my life!!! Currently flight training in a C172, so this is simply amazing!!!!

@NanaHoshi35 2 ай бұрын

me too for my multi-IFR!

@jesphillips2193 Ай бұрын

Me too. Gonna wait and see how it gets on! Very hopeful for this product!

@RIKAAR_Ambient 3 күн бұрын

Me to! 6 house till now on a 152! Bought this yoke yesterday

@tmellemat9147 2 ай бұрын

Wow,thank you for the info Mark

@timstahl 2 ай бұрын

Amazing! Been waiting to see videos of this one! Thanks 🎉

@sep2345 2 ай бұрын

Wow, just wow! Thanks so much for sharing this awesome device with us! I really need this, like right now!

@KiloCharlieVR 2 ай бұрын

Thanks for this great video Mark ! I’ll be keeping my eyes on this, it looks absolutely wonderful !

@Midlander1956 2 ай бұрын

A very enjoyable video, Mark. Your enthusiasm shines while giving a good explanation of the product.

@pascalbangratz2772 2 ай бұрын

Fantastic Marc. I really appreciate your tests. They are so professionnal and done with so sympathy. Thank you.

@ondryas77 2 ай бұрын

Always love you videos, Mark. 😊

@AuthentiKit 2 ай бұрын

I've been waiting for this one.

@VRFlightSimGuy Ай бұрын

Great review. This is tempting!

@sergiocrisostomo6100 2 ай бұрын

Thank you for your response I do like your videos they are very informative and stray fowere

@FULLNinja69 2 ай бұрын

With FFB you want the emergency stop button separate like Flitesim did here. If your system glitches, trust me you want that button in a place you can quickly and safely reach to kill the power.

@jmace1957 2 ай бұрын

Fingers crossed that you love this and save me a bunch of money over a Brunner! Wow - the box itself seems huge at 434mm (L) x 377mm (W) x 164mm (H) [17" x 15" x 6" roughly for us colonials] [UPDATE] - purchased in the early bird special. I credit (blame) you Mark.

@RIKAAR_Ambient 3 күн бұрын

Received it already?

@rontaumelscheibe 2 ай бұрын

Haha, enjoy your screaming. And my dinner. Thanks for this test Mark and happy weekend! Ron from Munich :))

@kristijank2780 2 ай бұрын

Keep up...very informative...love your videos❤

@jeffreybryner1196 2 ай бұрын

Mark -- great video (as are all of your videos); thank you. I've got the RedBird and Yoko yoke and am hoping to get this and replace those. Your video helped convince me.

@joshfredr7846 2 ай бұрын

Superb video. Thank you.

@davidh7280 2 ай бұрын

Anything that makes MSFS less of a game and more a simulator is good, thanks for the walk around!

@harpoon_bakery162 Ай бұрын

price-point is still out of control, but they'd probably have to go to plastic to make it 500 bucks, but I like the heck out of this unit.

@saren6538 2 ай бұрын

Can’t wait for this

@khaledassaf6356 2 ай бұрын

It's totally ok to laugh and show emotions. It shows that you're passionate for this hobby! Isn't that why we're in this hobby, after all? I can only wish to be as joyful and youthful when I reach your age! I'm glad we're finally seeing more options for FFB, it's something that's been sorely missing in the flight sim space.

@mike605 2 ай бұрын

It's nice having a FFB sim rig for racing and it's about time to bring that same feeling to flight sim with out braking the bank. I hope they make more great products to the flight sim world.

@garysmith8455 2 ай бұрын

Very nice! I was hoping under your heavy braking in that short field landing, you would have pulled that control wheel ALL the way aft to keep the weight OFF the nose wheel and also add a bit more drag to aid in stopping. Thank you for the presentation.

@NovaGeddon771 2 ай бұрын

Great review! Can’t wait to get my hand on a FFB yoke. Great t-shirt “WARNING” 😂

@chrisvowell2890 2 ай бұрын

Yay, great T-shirt! Where did you get it, Mark?

@Tehlongcat 2 ай бұрын

Pretty sure a C172 has an external trim tab for pitch trim, so you don’t get that movement on the yoke when you trim on the ground. The Pa38 is the only aircraft I’ve flown irl which does that. Other than that, this looks excellent (assuming that you can set up profiles for it to work just as well with larger aircraft as with small GA).

@NanaHoshi35 2 ай бұрын

interesting to know that PA38's trim works like that, I only knew older fighters like F4 F14 F15 etc do it in that way haha. BTW the boss of the company replied on their d-iscord: "confirmed that this option will be added in the next software update: To add: “Disable hardware trim on ground” effect and leave this box unchecked by default."

@JamesWhiteszln6z 2 ай бұрын

I concur, yoke does not move with trim on a C172.

@SimHangerFS Ай бұрын

I stand corrected, you’re quite right, the trim is on a tab and would not impact the elevator position at 0 kts on the ground.

@kentbergstrom3020 2 ай бұрын

Very interesting 👍

@ZockerBudeVR 2 ай бұрын

ahahaaah i love how much you enjoy it! thats exactly that feeling that i love in this hobby... new hardware, like back as a child at the christmas evening!

@SimHangerFS 2 ай бұрын

Thanks, my wife says I’m the oldest teenager in town 😂

@ZockerBudeVR 2 ай бұрын

@@SimHangerFS fantastic 😂👍

@melvilib 2 ай бұрын

You were having way too much fun Mark 🙂

@SimHangerFS 2 ай бұрын

That's true

@rolandgardiner3059 2 ай бұрын

Thanks for the detailed review! Looks like a good product! Still extremely expensive for our Australian dollar. LOL

@HDEFMAN1 Ай бұрын

Anything that adds more realistic feedback to the controls in MSFS 2020 has to be a good thing in my opinion. The scenery in MSFS 2020 has vastly improved over earlier iterations of the sim, as has the flight modelling and the quality and range of different aircraft we simmers have to choose from. ATC has improved as well. Adding fairly realistic force feedback to the yoke and rudders looks to be a game changer.

@thedrewh10 Ай бұрын

I’m glad to finally see force feedback in flight simulation becoming mainstream. This is the only way to fly if you want the feel of flying a real plane.

@JMsoo 2 ай бұрын

Got the Brunner a month ago xD. For sure I would had considered this one! BTW FFB all the way

@wizzardrincewind9458 Ай бұрын

The most important thing for me ist the resistance of the yoke: If your plane is standing on the ground, there is nearly no resistance. If you are flying slow (landing), the resistance is very soft. The resitance must be from soft to strong as you are flying slow to fast. You can feel the speed of the plane through the resistance of the yoke. Sorry for my english (i am german :)

@SimHangerFS Ай бұрын

Depends on what aircraft you’re flying.

@julianneale6128 2 ай бұрын

I'd like to get this sort of system for my THRUSTMASTER HOTAS.

@bobatkinson4762 2 ай бұрын

Mark great video! Might look into this down the road. Been wanting a force feedback controller to use with MSFS for awhile now. Thank you for making me aware of this. BTW love the joy, excitement and humor in the video. Never lose that! Keep up the great work! Also I see you had a stand for your keyboard to get it off your desk? If I have that correct what setup are you using to accomplish that? I have a keyboard on my desk as I fly but would love to get it off the desk to make room for other stuff. Recommendations? Thankyou. Stay well!

@SimHangerFS 2 ай бұрын

Next Level Racing keyboard & mouse stand.

@ABeech-zv5ri 2 ай бұрын

Great video, and glad you're enjoying it! Just curious... I'm not sure how the trim works on this modern Cessna, but moving the trim tabs at idle and rest on the ground on the M/N models I used to fly should have no movement effect on the yoke. Thanks for the video!

@davidkitchingman2222 2 ай бұрын

Nice one Mark!Yeah did some actual flying like you some years ago & in last 1 & 3/4 years accumulated more than 1250 hours in MSFS 2020.I seriously want a FB yoke now lol.Near wear I live in Fielding New Zealand there was a open day at the aerodrome & I sat in a actual real life C172 with G1000 think I might even give it a actual go again.

@SimHangerFS 2 ай бұрын

That's awesome

@lurchilurch5507 Ай бұрын

Looks amazing, a more compact version that's maybe a bit weaker would be nice. It's such huge unit

@poolhallshark 2 ай бұрын

Holy banana, this looks amazing. Great review, Mark! Love from Norway ♥♥♥♥♥

@rhydderc127 2 ай бұрын

I can feel an $800 dent coming to a wallet near me soon😂

@SimHangerFS 2 ай бұрын

🤣

@julianhall2008 2 ай бұрын

This yoke looks really nice and if it comes in at 799 usd, that's a fantastic price compared to the price of a Brunner. 😊 The functions and effects are very similar to the Brunner. I have a Brunner, Mark is absolutely right the ffb yokes are fantastic. Can only be a good thing having the prices coming down allowing more folk the chance to experience ffb.

@o.s.racing 2 ай бұрын

I really really want to get a yoke, having spent a fortune on Fanatec for sim racing whenever I fly, using a VKB stick I long for more immersion. However because my rig is dual purpose with throttle velcro'd to a shifter plate on the side and a swinging keyboard tray to put my stick on in front of the wheel, I don't have a good option to mount one yet. I need to come up with a system to attach to the profile rig that allows it to swing out of the way for racing, but swing back in and lock in place when I want to fly

2 ай бұрын

By the first look, it seems they found lots of inspiration from Brunner's products

@MegaPeedee 2 ай бұрын

Microsoft did make the Force Feedback joystick. It gave me a very painful carpel tunnel syndrome injury, which impacted on my career as an infantryman. Even picking up a pen hurt. I was out of action for about 3 months and never touched the stick again, except to drop it (sadly) in the bin. Having said that, it was amazing.

@MozTS 2 ай бұрын

Skill issue

@JC-xz4ec 2 ай бұрын

As much as this interests me, after being burned by a previous yoke company I'm quite hesitant to do anything with a company that only recently went into business. It does look fantastic though.

@coffeeguy6673 2 ай бұрын

Looks terrific, Mark !! I dabble with MSFS 2020 and had a proper flying lesson in a Cessna 152 at Leicester airport last year and immediately noticed how different flying in real life is. With motion platforms and force feedback controls the realism is getting closer, what a time to be alive !! By the way, did you say "gear up" shortly after take-off ?? 😆...probably habit !! Cheers for a great and interesting video, Daz, Leicester.

@SimHangerFS 2 ай бұрын

Yes…guilty as charged 😂…should have been flaps up.

@suddenlysolo2170 2 ай бұрын

I'd love to have one, but it's probably more than I can afford. I currently use the Turtle Beach Velocity One

@raywalsh5414 2 ай бұрын

Looks like a fine piece of gear, if perhaps a bit heavy duty for the average simmer. I fly the 172 at my local club and the loading on the yoke in normal operations is light enough so you would be unlikely to find yourself wrestling with the yoke with two hands ..... assuming the wings were still attached ! One small point, the trim has zero effect on the yoke/drooping elevator when the aircraft is stationary so maybe that's something that can be addressed in the settings.

@NanaHoshi35 2 ай бұрын

The force is adjustable. And have more power is better for flying heavier aircraft (it's even not enough)

@rh3223 2 ай бұрын

Superb. That’s a contender for some £ - will you be reviewing the matching switch panel and throttles ?

@SimHangerFS 2 ай бұрын

Switch panel is epic, but still under development 😊

@firsthause7462 2 ай бұрын

Thanks for Video Have you maybe use it with 737 PMDG ? I wonder how that will work

@StevenSquier-er9gd 2 ай бұрын

Awesome fun, How did you get the gear up at 16:27? On a serious note are/how/can you mount it on the DOF3?

@greggseipp 2 ай бұрын

Hmmm. The force-feedback is impressive. This unit with this handle is probably great for flying small airplanes like Cessnas, Pipers, etc. I'd probably wait for a yoke handle at least like a CH yoke...a handle that is more suited for a TBM, Citation, M500. Interchangable handles would be a bonus.

@spinb 2 ай бұрын

Looks like a fine yoke and undoubtedly adds to the realism. It seems they purposed this yoke chiefly for the prop planes; they don't even mention jets in the description. I am wondering if CLS60 can perform well with, say, a 737.

@SimHangerFS 2 ай бұрын

Due to the config options, I can’t see why not, but have not tried it…yet 😀

@geraldmadero5131 2 ай бұрын

That would be interesting to know Mark. I flew 172’s in RL and fly mostly 737’s in the MSFS so I do some relating to how you are so impressed with this flying the 172.

@Ahmedblaser 2 ай бұрын

Should work fine. The yoke does not differentiate between aircraft

@MrRamoSzz 2 ай бұрын

Pitch is not in NM but just in Newtons as it shows how much force is pushing. Newton meters on the other hand show rotation force 😉

@SimHangerFS 2 ай бұрын

I stand corrected. Thanks.👍

@paulsheather7657 2 ай бұрын

I have the Brunner force feed back yoke and love it.

@SimHangerFS 2 ай бұрын

I hear they are amazing 😊

@paulsheather7657 2 ай бұрын

@@SimHangerFS Yes they are and you can download profiles for FS and xplane aircraft.

@rgm4646 2 ай бұрын

great video! Im curious how this would work on the 777 or airbus in MSFS, and if they have plans on supporting the xbox series x

@NanaHoshi35 2 ай бұрын

For 777, it depends on how good the data PMDG would expose to the telemetry otherwise the software has to do it on itself..but since the real T7 has an artificial feel system that alters the control loading depending on various parameters, it's kinda like a flight sim FFB device. For the buses..if you really want to fly the sidestick buses with a yoke, you can simply set it as spring centered I believe. For the yoked buses of 300/310, I'm not sure if they have "FFB" system or just spring-centered..

@rgm4646 2 ай бұрын

@@NanaHoshi35 thanks!

@nortonp3983 2 ай бұрын

I will be interested in how you mount it to your H3 and what effect the extra weight has on its operation - great to see you like a kid in a candy store- excellent reactions and I'm sure the sales for these will be like toilet paper during covid- lol

@SimHangerFS 2 ай бұрын

🤣

@Back2TheBike 2 ай бұрын

Looks like a terrific product but can't help wonder how all those moving parts will last over time with wear and tear.

@xeldinn86 2 ай бұрын

Hopefully as long as a FFB wheel

@killsapm8883 Ай бұрын

Very strange to have the yoke move when you trim. Trim tabs don't move the yoke, they work on the control surfaces. In some aircraft (FBW) the entire horizontal stabilizer moves with the elevator trim, for sure not on a C 172.

@rhydderc127 2 ай бұрын

I’d be interested to hear how strongly it’s able to resist you pulling back in a steep turn?

@MrNeilRoberts 2 ай бұрын

When I heard Kickstarter I went to next video lol 😂

@bstikkel Ай бұрын

I have been searching internet about this ff yoke. As far as I can discover in may there is only starting a finance gathering action to be able to produce this product. Not for long for sale in the normal ways, as far as I understand.

@SimHangerFS Ай бұрын

First 50 units sold out. Development completed. I understand they will be raising finance via a kickstarter to fund production initially.

@bstikkel Ай бұрын

@@SimHangerFS Thanks for the additional info! Would be great if there will be a chance to order one too 🙂

@get_outdoors 2 ай бұрын

I look forward to seeing your next video, you should have arms like Arnold Schwarzenegger 😂

@SimHangerFS 2 ай бұрын

😅

@borsi99 2 ай бұрын

Is this force feedback doing any noise inside the case? Very earlier version did have a loud motor in it which was not a pleasure to use it! Thanks.

@robertmcdaniel8147 Ай бұрын

Teaming the Somnium VR1 (or Varjo XR4), the DOF Reality H3, and the recently announced Flitesim FC-50 console should check all the boxes for a state-of-the-art simulator. The DOF Reality steering wheel platform and foundation, however, appears to be inadequate for the task of supporting the 40 pound, 27-inch-wide console. Can the DOF Reality H3 platform be modified to support the heavy Flitesim FC-50 console?

@critical_always 2 ай бұрын

60n force for pitch is a lot but what is the response like? In other words, how quickly can it accelerate / decelerate and speed of movement.

@colb6171 Ай бұрын

I thought the trim control just moves the trim tabs which would not directly move the elevator when stationary on the ground

@SimHangerFS Ай бұрын

Your correct, my error, the elevators would only drop on the older style aircraft with hydraulic controls.

@christopherwalker283 2 ай бұрын

Can you add stick shaker for the larger commercial aircraft?

@SimHangerFS 2 ай бұрын

I am not sure, but there is no specific setting for this in the config.

@ukar69 2 ай бұрын

It didn’t really come across on the video but if you fly slower the controls should feel looser.

@ianrivaldosmith 2 ай бұрын

Hmmmm, I’ve been 90% close to pulling the trigger on a Brunner MKII for the last few months. This has make me pause and think. What’s the dimensions of it? I know the burner MKII is pretty long on the desk!

@SimHangerFS 2 ай бұрын

Details in the video, it is bigger than a Brunner😮

@SuperTica22 2 ай бұрын

gear up😂😂😂

@SimHangerFS 2 ай бұрын

😂 yeah I know…

@MrSschrotti 2 ай бұрын

Ha, where to buy in Germany?!

@markm75 2 ай бұрын

Could this integrate in the DOF reality setup somehow, seems like it may be too long/heavy (dof reality 6dof here), also seems to have less buttons than the Honeycomb, but that could have a workaround with other devices.

@SimHangerFS 2 ай бұрын

Yes, I am struggling to find a workable solution for a DOF H3 .

@sergiocrisostomo6100 2 ай бұрын

Hi I’m from Peru I will like to know what is your throttle system now that you are using my name is Sergio Crisostomo I do have the saitek and it is very old thank you

@SimHangerFS 2 ай бұрын

I am using Honeycomb Bravo throttle Quad.

@evanphotography5149 Ай бұрын

How is the CLS60 forces flying a Boeing airplane, do you feel it it had enough forces to feel realistic and is there any mechanical backlash feeling coming from the motors while flying ? Thank you Mark.

@SimHangerFS Ай бұрын

Just a vibration, not sure if flying airliners this is the right peripheral choice.

@techandco. 2 ай бұрын

How about Virtil ? (Not only the devices you're sent out for free ;-)

@SimHangerFS 2 ай бұрын

Hotas & rudder pedals (Ace) coming up in May 😀

@GregWoodsLancs 2 ай бұрын

surely trim wouldn't move the yoke unless there was airflow over the trim tabs?

@GregWoodsLancs 2 ай бұрын

Wouldn't stop me getting one!

@SimHangerFS 2 ай бұрын

Yes it would on the older types, but not to the degree shown obviously, otherwise you may well damage the trim linkage.

@iNherjer Ай бұрын

@@GregWoodsLancsit’s already fixed in the new software version

@gufo2020 2 ай бұрын

wonder what FFB "protocol" use this joy+soft, because afaik MSFS doesn't support FFb at all.......maybe this soft can work with an MSFFB2 also 🙃

@moviefan8939 2 ай бұрын

Have you tried the MS FFB Stick with XPforce?

@gufo2020 2 ай бұрын

@@moviefan8939 yes, works ok with planes....not usable with helos (or at least the one i've tried with, don't remeber which one, not MS)

@philb6537 Ай бұрын

Im going to guess it wont be for xbox. All good for me just curious i

@SimHangerFS Ай бұрын

No not Xbox compatible unfortunately

@msvizzera 2 ай бұрын

Are you not using the DOF with this? Cheers

@SimHangerFS 2 ай бұрын

Still to work out if it will fit 😀

@FrankyVR1 Ай бұрын

Where can I buy this? Website doesn’t have it on sale and I can’t find it anywhere on kickstarter. No official link anywhere.

@SimHangerFS Ай бұрын

Kickstarter to launch in June I believe. Subscribe to email and they send you all the details and updates.

@eracer1111 2 ай бұрын

Plan in place: 1) Sell exercise equipment. 2) Buy FF yoke. 3) Fly and get workout.

@SimHangerFS Ай бұрын

😂

@kenbarthSimAV8tor 2 ай бұрын

I've $pent so much already LOL - my partner will take away my credit card if I buy anymore sim hardwareLOL!

@SimHangerFS 2 ай бұрын

🤣

@NylonStrings46 2 ай бұрын

Hi....Is it suitable for all types of Airplanes????

@SimHangerFS 2 ай бұрын

It is configurable to a large extent so I would say yes it would suit most, but perhaps not all.

@captainwealthy 2 ай бұрын

Bye-bye Honeycomb Alpha!

@miraclealigner 2 ай бұрын

Hi Mark! Will it fit in the alpha yoke space on the dof reality h3 ?

@SimHangerFS 2 ай бұрын

Width …yes…length is an issue. Still to try it out.

@miraclealigner 2 ай бұрын

@@SimHangerFS thanks Mark! Hope you’ll let me know

@SimHangerFS 2 ай бұрын

@@miraclealigner will do, but not too optimistic

@evanphotography5149 Ай бұрын

@@SimHangerFS Can you use velcro underneath the yoke to mount it on H3 ?

@SimHangerFS Ай бұрын

@@evanphotography5149 no not strong enough. Can use support plate and double sided tape.

@user-fi9jg7vh8g 2 ай бұрын

What sense of feeling if it is not completely accurate in MSFS?

@SimHangerFS 2 ай бұрын

Better than no feeling at all 😀

@user-fi9jg7vh8g 2 ай бұрын

@@SimHangerFS For more than $800 price I feeling only the pain )))))

@gorkadelgadomarraco2575 2 ай бұрын

What sbout aerofusion v1 ffb,IS this real?

@NanaHoshi35 2 ай бұрын

aerofusion IS real, tho I believe they didn't start marketing outside CN (yet?). Their first few 12NM version(previously planned as 9NM but got upgraded to 12NM and overhauled for production version) have just been sent to the customers and the 36NM version(with some surprise upgrades hinted) is coming soon as well.

@gorkadelgadomarraco2575 2 ай бұрын

@@NanaHoshi35 where are this info?i try to find more info and only has a promo video(with my coment to

@NanaHoshi35 2 ай бұрын

@@gorkadelgadomarraco2575 oh most of the info is in CHN internet and their CHN SNS group and I speak CHN..

@NanaHoshi35 2 ай бұрын

@@gorkadelgadomarraco2575 (d**n ytb deleted my comment again for no reason) it's from the CHN internet (namely the official chat group)

@NanaHoshi35 2 ай бұрын

@@gorkadelgadomarraco2575 from their osacr-fficial charlie-hotel-alpha-tango golf-romeo-oscar-uniform-papa in CHN (sorry I have to post the words in NATO alphabet in an attempt to avoid del by the mike-oron silicon valley's mike-oron algorithm)

@MegaPeedee 2 ай бұрын

I would miss all the switches I have on my Honeycomb Alpha yoke unit, so it won't be on my desk, unfortunately.

@SimHangerFS 2 ай бұрын

I’m going to put the Octavi IFR1 on it and problem solved. 😊

@vfx7t 2 ай бұрын

$799 Goodbye team and sim :((

@JarppaGuru 2 ай бұрын

no if you allready had honeycomb

@VRFSC 2 ай бұрын

Brunner yoke is a stunning yoke, very high quality and not chunky like this one... it's refined. The Brunner software is way more superior regarding customisation... the functionality on this is better than some but not Brunner. Based on this video I still believe the Brunner series is more superior... but is it $500 more worth it! FFB gives you so much... only way to go if you can afford it. Only thing I would be worried about... "kickstarter"

@ianrivaldosmith 2 ай бұрын

More like almost 1000$ more, because the MKII is what you need to compare it against. The NG travel is tiny.

@NanaHoshi35 2 ай бұрын

As others already mentioned, nah the travel of the NG is so tiny that ruins its software. And the product itself has potential as the manufacturer behind it also makes professional level products, just like Brunner.

@larrysouthern5098 2 ай бұрын

This could be the holy grail to separate the gamers from real world flight simulator enthusiasts.. I have said for years the biggest difference from home flight simulators to the real life flying is the "Bump and grind" in real airplanes... controlers like this what you have here will put Flight Simulators in the world for BIG BOY FLYING.. THIS LOOKS LIKE A WINNER!!! CYA 🐦

@aileronsintowind6835 2 ай бұрын

Wing dropped and you put in aileron 😂.. don’t do that.. your in a Cessna just let the yoke sit naturally and then build speed and once at 70knots bring the yoke back a touch. Other than that I do wish they would send this items to real world verified pilots to review..