I'd like to thank you for possibly THE best product review on KZfaq. Seriously, you should be giving seminars!

I bought a Handy Lift 20 years ago. Best thing I ever bought!!!

Handy should pay you for this incredible review.

Just got my SAM 1200. Outstanding video. I waited 3 years to purchase then almost 70 extra days for delivery due to back order. Well worth the wait! Very pleased with mine from purchase, to delivery, to set up.

The furniture (lift?) dolly idea.. mind blown! Great review

I own this exact lift. I also bought the removable lift side extensions. Adding the side extensions increases the width of the table to four feet wide. I can now service ATV's and riding lawn mowers. The side extensions come with everything you need to add width to your table in a couple of minutes. It also has a stabilizer bar that slides into the stationary part of the floor foot that prevents the table from being flipped on its side. My previous lift did not come with this safety feature. The side extensions also come with two more removable ramps that increases the width of the ramp to the same width of the table with the side extensions installed. I also bought the lift dolly that fits into the pin hanging down on the underside of the right rear of the ramp. I slip the dolly over the pin and I can easily move the lift around my shop, unloaded and fully lowered, of course. I also drilled two 1/2" holes in the lift table top and installed two industrial grade eye bolts, which are used for the motorcycle tie down straps. All this did not come cheap, but neither did my 2020 Ultra Limited, which cost me around $39,000. Handy Industries motorcycle lifts are 100% American made. No cheap ass parts or materials used. There's no way in the world I will trust a Chinese made lift, like the ones sold at Harbor Freight, to lift my $39,000 Harley. They look too flimsy and use lightweight materials. I'm afraid they'll collapse. Take my advice and buy a Handy Industries lift. They are MADE IN USA by Americans. Support American workers and manufacturers. Besides, when was the last time you were in a reputable motorcycle service shop and seen the mechanics using cheap Harbor Freight lifts. You haven't, and neither have I. They all use Handy lifts.

Great video!!!! Clean clear and concise. I am sold! So refreshing to see someone other than "Boben Weaver" doing a home video with a head cam!!!! THANKS FOR POSTING!!!

my new Handy SAM 1200 just came in last week and it is just like this video said, easy to use and move around on furniture dolly which is easy to move around in the 820 square foot shop at my house / lifts the harleys i have easy / locks work great. my small pancake compressor i use for my nail gun powers the Handy SAM 1200 no problem... very happy with this review .... thank you so much. no longer have to work on my knees... or back... $1,190.00 for table lift & $198.00 shipping to San Diego, CA... $179.00 For wheel vice not free... tax $99.25 / $1,666.25 total, my knee damage and back pain i don't need so i paid the price for table i look at it as a investment. this is the same table that the Harley Dealership uses... if good enough for Dealership then i should be good and safe. harbor freight lift was to fimsy and weak for Harleys... just say`n

I have a smaller shop and seeing how I can move this table around the shop, will definitely consider this table. Thanks for a great review.

Great review. I've been going back and forth on two different models. One is currently in stock, while the Handy is over a month out. Based off your view I have ordered the Handy and feel it will be worth the wait. Thanks for taking the time to make your review of this table.

Great video. Ordered mine last week. From Mile-x equipment. And just received an email stating back ordered. 6 week wait. Excited and patiently waiting. Pls do an update video showing any new tie down mounts that you’ve done. Thanks.

Outstanding Review. Sold!

EXCELLENT REVIEW!!! Love how you are able to move it around!

Buying this model because of your GREAT review and summery… THANK YOU!

Awesome straight forward review! Covered all relevant areas of concern! Looks like a great American made product. Thanks for the review.

I bought one about 20 years ago and couldn’t live without one, I had 2 but sold one when I retired I didn’t want to work on motorcycles anymore just wanted to ride and travel, the one I sold had flush mount floor lights in the table, great lift

Thanks for the assistance with my lift with what finally turned out to be a pinched air hose!

This had to be the most comprehensive review I have ever seen. Appreciate your effort and Thank you.

This review is the best I've ever seen. Very thorough!

MechSavvy- Very well made video, just what I was looking for. I'm retired now and have the time to start working on my bikes again. I've been researching the available options and had it narrowed down to three choices, one being the Handy. After watching your video and speaking with the customer service folks at Mile-X Equip I just placed my order for the Handy. All USA made, at a reasonable price point for the quality, and by far the most reasonable shipping cost. Thanks!

Edit, watched the entire video and saw you have the stack height measured. Thanks for the thorough review!

This is the first I have seen of Handys new lift. I like the higher lift very much. I have used every generation of handy lift since 1969. They have all been great. Enjoy

Thank you !!! Very well done n very informative !!! The furniture dolly was genius !!! I will be purchasing a Handy Lift !!

Sold !!!! I thank you , cannot wait for this table!!!

Been waiting for mine for 8 weeks now. Found out its sitting in wisconson waiting for a truck with a lift gate to deliver it to my house. Had to watch the video to calm my nerves lol.

Very informative...thanks. When you rolled it away on the cart....sold.

Nice table, can't go wrong with a Handy. My 1000 model Handy has been doing a great job for me for 26 years. It holds my Goldwing fine and I've learned to work around not having the drop out tail.

Bought one back in January, lifts my limited with no problems, I have a very small compressor and it works great,

Fantastic review… learned so much, and greatly informed my future lift purchase. Thanks!

TY ! Great review ! I appreciated your meticulous and detailed approach

This is how a review should be done! Thank you sir!

Thanks for the GREAT review. Mine is on the way because of this review. Thank you for taking the time. I have been searching for a good lift for all of my motorcycles.

This looks like a great lift. I picked up a used Handy 1000 when a local bike shop closed for $150.00 in January. I use it for my Goldwing and of course don't use it much. I sure like the features of the new model. Thanks for the review.

Great review. Thank you for your great attention to detail and for sharing your knowledge.

Excellent review - thank you very much for making and posting!

Excellent, just no nonsense review. Thank you sir!

Great looking lift!!! Good review..

Great review I have been looking and studying the handy for a while now. Most of the Harley shops in my area use the handy . That to me says a lot about it also.As far as the floor height when down. You have to realize that a lot of places have these lifts recessed into the floor so that they are floor level . I know this isn’t feesable for a garage but just thought I’d throw that in.

Killer review. I'm sold. I like the idea of the bags.

Great review, thanks. I plan on purchasing this next week, with a little bit of help from your review.

Great review. I'm about to buy a lift table and you provided a ton of great information for me to ponder. Thanks again!

I like clean speech & personal comments, plus any music

Wow thanks for a very clear and precise review!! I think I’ve found my first lift !! Thank you for the review and I’m also subscribing to your Chanel, can’t wait to learn more inner workings and how too’s

Great review. Just what I needed to make my decision. I'm ordering one today.

Excellent review, well thought out and executed.

Great video, very thorough! Thanks for posting

Good informative review. Looks like a great table. I appreciate you including the so called negatives regarding the table to make everything fair. Built is USA is a plus!

loved the video. you do a great job. will look for more

Excellent review sir! You are easy to follow and understand!

Thanks for putting this video together. We appreciate your efforts.

Hi guys. Thanks for the positive feedback. Apologies, comments were marked to approve and I missed them. As of this writing (3/17/19), the place I found with the best deal was Mile-X. If you get via eBay they are $1190 to a commercial address, or direct from their website $975 + freight. If you can get delivered to about anyone's business address it's cheaper, or you can have it held at the terminal and go pick it up, which is what I did.

Great review! Ecstatic to learn that it's made in the USA1

Fantastic review! Thank you!

Good review. Informative , detailed and to the point! The thickness of the top seems more like 11 gauge (.120” nominal) though.

I’m partial to Handy myself, I inherited my first Handy lift from my grandpa and I must say, their quality is above all. I also own the lift from harbor freight, that’s what I had before I got the handy and it doesn’t even come close.

Thank you for your sage advice!

Thank you for the review! I got mine ordered!

Very thorough video, I will be buying my own, thanks for the info!

Good professional review thanks MechSavvy

Good review! Thank you! I think I need one! USA!

Very well done, I think I'll get me one of these.

Very professional review. Thanks!

Great review! That dolly trick is a deal maker for me...that was my biggest concern, moving it in my garage. Thanks!

I bought the old 1000 series about 30 years ago so I didn't have to crawl around on the floor. I have never had a problem with it, I did have to drill new holes to accommodate skinny dirt bike tires.

Awesome review. Thanks very much.

This review is brilliant! thank you.

Great review. Quick & to the point.

Very nice! Good job on the review.

Excellent review, thank you for taking your time (Y)

I love your reviews thanks!

I have a 19 HD Street Glide Special and just cleaning it is a pain in the butt. I will be servicing it myself very soon , it just recently went for 1000 mile service at dealer. I think I need that lift. Myrtle Beach S.C.shout out to Mechsavvy Thank you brother!

Fantastic review. Thanks for that.

Great review, thanks for sharing. Cheers

Great ! It looks really good! Sustain the great job!

Great review. Thank you.

Thank you for a great review. I have a cheap one and would love to upgrade to this someday.

Excellent job!!!

\sweet lift. May be my next lift.

Great review!

Nice looking table. I wish I had the room for a Table. I have the PitBull Motorcycle Lift which I use for my Goldwing, however, it does not work with my CB1100. Great video review sir!

Your a Genius!!! Love your review!!!!

That is one nice lifting table! Good review!

Great review, thanks 🍻✌

Thinking about the BOB 1500 or Gruntavore since I have UTV's and a commercial mower. Looks like the BOB is my best bet since it has the rear wheel dropout than I'm not seeing on the Gruntavore. More bucks but I need the side panels. Thx.

Handy used the air spring set years ago. I used one for a few years. Liked it better than the ram.

Wow! Sorry I'm late to the party. I really appreciate the straightforward knowledgeable review from someone who has obviously done a lap or 2 around a lift table. I love the lift and the options, now I'm curious to find out at this point if Handy makes one of these bagged-out beauties that now plug into a wall outlet instead of an air compressor. I now have visions of quietly slippin' away, off to the garage for a lil' midnight scooter wrenchin' on the ole Side Peice.

Watched the video a couple more times before my wallet finally cracked open! Then quickly booked in an order through one of their distributors up here in Canada!!! Dam can hardly wait... but I do have to wait... peerz they are busy and behind on their orders... a good sign. The distributor told me once they sell one of these they never see the customer again!!! Another good sign! Since I am now over sixty if I get sixty or eighty years use out of it I will be more than happy!!! : )

Great review MechSavvy

GREAT REVIEW !!!! THANK YOU

Great Review... 😀

Got mine delivered today!!!! Excellent quality

I have this lift. I bought it about 25 years ago. Make sure you get the front wheel clamp/vice. Also, when the air hose blows out, it sounds like an M 80 going off, and the lift drops fast , so make sure you have the safety engaged and the air pressure reduced. And don’t ever have a chair or something partially under the lift when you have a heavy bike up on it if the air hose blows out, you will wish you hadn’t done that.. before you buy a lift, if you’re gonna put it in your garage at home, keep in mind, you can’t go all the way up if you have a tall windshield on your motorcycle without striking the ceiling, or the garage door, or if you put the lift up with your motorcycle on it and then you open the garage door, you have to make sure you’re not going to be striking the windshield with the garage door.. it saves a lot of work and actually makes working on your motorcycle a pleasure doing little things like changing the oil or changing the brake fluid/clutch fluid, changing the spark plugs, adjusting the valves. I would not be without a lift for my motorcycles. I also use the lift for other projects like woodworking, or whatever I need to work on . it’s great having a workbench you can change how high it is or how low it is..

Good Job. Thank you.

great review- sold me

my handy Sam arrives tomorrow this is a great review thank you ps i hope i can get it out of my truck

I bought one new in 2006 and prefer the hydraulic version. Never had any problems with it.

I’ve had my Handy 1000 for over 27 years and had absolutely no problems. The best accessory for any lift is a Condor Chock. No pinching the rim no trying to hold the bike and crank the vice and no tie downs needed. It also works great for unloading heavy items from your pickup truck.

mine is getting delivered tomorrow

Nice, my harbor freight hydraulic sprung a leak after a year, looking for ideas to fix or convert it

Nice job in reviewing the table---Question: what size are those wheels?-- Thank you