How many opened the video to just watch the lighter hack and now feel like being cheated 😒

FINALLY! I can just grab my drill, some screws, some baking soda, a syringe, a D battery, and some gorilla glue to make a lighter that barely lights, and could potentially explode, instead of wasting 2 bucks on a new one!

I did use the duct tape backing on sand paper. That one I will give a thumbs up.

I’m a handyman, thank god no one knows about the glass coke bottle trick! My business would go under!

That lighter "hack" is a really long walk for a short drink of water. 😂😂

The part that cracks me up is where he spends all that time to mod that sketchy lighter and then on the next object he uses a completely different lighter 🤣

When I saw my handyman hook my refrigerator up to a pencil, at first I was skeptical, but then he referred me to this video and I've been assured that he's a professional after all.

I also noticed something, it’d make far more sense for your “handyman”, or contractor, to want you to know these. So they can charge you thousands of dollars to repair the explosion you created in your home.

As a handyman, I CANNOT BELIEVE YOU TOLD EVERYONE EXACTLY WHAT I DIDN'T WANT THEM TO KNOW!!!

You don't need to drill holes in wood to twist wire with a drill. You can just put the wire's directly into the chuck of the drill.

I started doing the lighter hack... Noticed the electrical arcing in my drill... Used that to light my joint... Thanks for the tip.

My handyman would be so mad if I learned how to partially fix a lighter. Thank you!

I watched my grandfather in Pennsylvania cut tops off glass gallon jugs this way using kerosene & string. When the fire burned out, he tapped lightly around the string line with a small hammer. The top usually broke off clean. He put the body of the jug upside down over his rose bushes to protect them through the winter. I loved that ol’ guy!

Solutions for problems that don’t exist…yet I kept watching. 🤗

That's a great way to fry your usb adapter, Shorting the leads to make that soldering iron tip heat up requires a ton of current. Even on the lower power end, a soldering iron would require 20W to be dissipated. From a 5 volt usb supply that would mean 4 amps of current is required, when most usb adapters are rated between 1 and 3 amps. This is disregarding power losses throughout the length of the tip and contact resistances at the terminals.

I was at home trying to watch this video when suddenly some handyman's kicked down my door and slammed my laptop shut. They told me they don't want me to know the forbidden secrets of the sacred order of the handyman's. I would like to watch this video but they threatened to come back and shut my laptop again. I'm afraid of the handyman's.

I showed this video to my handyman and he started crying.

Finally! I can stop paying a handyman to cut my Coke bottles in half.

Cool tricks to make small jobs take longer!

Boy oh boy, if my handyman found out I figured out how to make a soldering iron out of a pencil, piece of wire, and a usb connector…. He’d be soooooo pissed!

As someone who has seen a lighter explode when chucked at the ground, that seems like an awfully dangerous project to do when you could just buy a refillable lighter.

I'm reminded of advice by Father Guido Sarducci, who said you can make an emergency umbrella with a garbage bag, a hulahoop and a stick. "So if it's raining and you don't have an umbrella, but you do have, you know, a garbage bag, a hulahoop and a stick....".

Channels like this are made to hasten the distribution of Darwin awards. Keep it up. 👍

Always wanted a rechargeable lighter... So I bought one!

If your handyman uses any of these 'hacks' he himself is a hack!

A far simpler and easier way to twist wires is if you have a keyless chucked drill, put both, or as many as you need, into the Chuck, tighten it down, and spin! I used that all the time doing car stereo installs. No need to drill out a piece of wood. And if you’re able to drill out the wood, then you’ve clearly already got the drill. Try it!

3:03 **Sitting in class** Cute girl: do you have a pencil I can borrow? This guy: it's complicated

“We only have 5 seconds, MacGruber!” “Ok, hand me a pencil, that USB adapter …”

Who are these handymen that don’t want us to know these secrets??? How can we punish them?? I suggest we make a lot of crazy Vic lighters to show them who’s the boss!

The lighter will build up pressure of both hydrogen and oxygen, turning it into a bomb if left on the battery for long enough.

As a handyman, *I'M FURIOUS* that you know this.

The reason handymen don't want you to know this is because literally every 'Tips & Hacks' that was shown was just a really inefficient way to go about it

The duck tape and sand paper is a pretty good idea have to remember it

The soldering iron was amazing! I didn't suspect at all that's where you were going with all that, I may actually try that one myself! Thanks!!!

Love the soldering iron great idea but you must get the wires round the right way to make it work.😊

“Great, I now know how to split a glass coke bottle” said no one ever

Thanks mate, my soldering iron works great:)

That was certainly a way to solder... I'll stick with an actual soldering iron

The definition of spending a minute to save a second

Take it from a 20 year experience handyman... ........if my lighter suddenly stops working, I simply just ask someone if I can use theres

Wow. He invented some type of iron for soldering. If only something was available on the market.

We actually need a simple trick that can be applied in real life scenario.

Now I know how to give my $1.69 lighter a second life. All I need is: $0.32 screws, $0.97 baking soda, $7.99 mini bench vise and $5.54 9v battery. p.s. I can borrow screwdriver from my friend or use dime because finger nails don't work

As a handyman myself I have never needed to rig up anything i just watched on a job site. Maybe if I start charging by the hour i could retire early by making my own tools on the job.

😳 that's an awful lot of work for a disposable lighter

Excelent inventions And Clever TIPS!🥳

Best soldering iron ever😍

That pencil soldering iron was pretty cool

A wall charger will never have enough amps to create the type of heat needed, pencil lead or anything....

The hydrogen lighter was lit.😄

2:50 all that work and barely any flame

As someone who's played with HHO generators and knows how explosive that gas is, I'm scared of the lighter 😐

Assalamu Alaikum. I am a student of EEE department. I🧡 have watched all the videos from your youtube channel and I am waiting for new videos every day. ❣️ I like the videos a lot. Love is endless from Bangladesh. 🇧🇩

What is the liquid going into the lighter..... water?

بارك الله فيك وحفظك أينما كنت سيدي

Thanks for showing me why I'd rather buy this thing! Thumps up!

The soldering iron is a great idea!!! Just dial 9,and 1 in your phone and be ready for the last 1

This is so awesome!!! As a goldsmith this makes a terrific wax pen for grillz etc. Thankyou!!!!

This is handyman john wick. He soldered using an effin pencil... AN EFFIN PENCIL!

You made me jobless as handyman !!!

Damn those handymen's with their secret knowledge!

This guy has a lot of time and meth on his hands but still pretty cool what he comes up with😆😂

The correct term is "Handymen". "Handyman's" is an indication of ownership, such as "the handyman's drill".

Absolutely great❤️

Finally, I can now join the A Team and use my skills as a CV

Since I can't find a glass coke bottle to try the trick on, I'm thinking about using a full bottle of Crown Royal. 🤔 Then again on second thought...

Soooooo many things in such short time!!!! *All* of them useful. Thank you!

My dad is a handyman and I asked him how he feels now everyone knows? He hasn't been able to get out of bed for the last fortnight.

If there was an apocalypse where you couldn't just go out and buy lighters, I guess I can see where the lighter hack would come in handy. Now how do you diy a battery to make the lighter work? 😃

Super

This is the type handyman that's coming back and cutting all the Copper out if your new house at 230 am

I've tried the last one five times before this video and none worked good enough but the lighter one really is like a lot of work for the little flame

yes, cause im sure my handyman doesnt want me to know how to cut a coke bottle in half

I cant tell you how many times I've tried the bottle string thing and never got it to work one time

Hallelujah Wished We Would've Had Knowledge About This Along Time Ago Amen ❣️

I have a very nice soldering iron , thanks anyway

The lighter hack was too much effort for too little worth..........but, the soldering pencil was very cool and interesting; provided u find a powerful enough source of current for it. Anyways ur videos are very entertaining and informative. Keep it up 👍

Wonderful Thanks👍

Wonderful! There are so many ideas, and they're all realized. A new discovery!

I think smashing two rocks together would have been easier than the lighter hack.

That last one, the soldering iron, I've seen prison inmates do, minus the copper and the clamp.

You spend more money to refill that lighter with your inefficient "trick" that only works 1 time, than just buying a refillable one with a brutane can to refill it a dozen of times

You got every handyman here to California fuming with this video. They don't know what they're gonna do now that all these secrets are out. 😱😱

Yo that pencil soldering iron is on some Tony Stark levels brah.

Super, wie immer einfach genial. Thanks

A few conundrums arrise for me. For instance, the soldering iron pencil subject; is that just an extreme low melting temperature solder? Usb power supplys depicted max out at 5 amps ? roughly

Ok I get what you did with the lighter! You made an cathode and an electrode , and by putting the 9 volt battery on it you made hydrogen and oxygen! Very nice! That sir was snazzy!👍🏻👍🏻👍🏻

Amazing...👍

When I showed my handy man this he smashed my computer and ran off because he knew the jig was up.

This art attack for old people. Love it!

Can we just respect the fact that this guy had some cool ideas that actually work, and was willing to share them with us? Why does everyone have to be so negative?

Other than cutting the glass bottle This is more like a video of how people do things that don't have the proper tools but are creative AF 🤣😂🤣

The lighter is cool and all, but that gas is a mixture of both hydrogen and oxygen so it could potentially blow up in your hand.

That last one can't be real. No way a 5V usb can melt solder.

Exelent,,, really exelent.. Thanks for the tips..

Showed my handyman the soldering iron. He shouted "Who told you about this?!!". He was most upset.

I think a dead short to make the soldering iron would kill that charger in 2 seconds.

So I can make a soldering iron out of a pencil and pretty much use that to make other contraptions. Interesting.

Now I can toss out my pencil soldering irons and make one out of a pencil. Genius, never would thought of that.. Also can use pencil lead for cutting metal but I would have to make a video to show how it's done..

My God,the time and effort for that barely,miniscule,hardly see able, head of a pin light is so satisfying