HANDYMAN TIPS AND TRICKS THAT REALLY WORK

Рет қаралды 2,921,248

TechZone

11 ай бұрын

Mind Warehouse ► goo.gl/aeW8Sk
For copyright matters please contact us at: copymanager.mn@gmail.com / @incredible-qq2zi

Пікірлер: 448

@brianstevens3858 10 ай бұрын

Don't use salt on a screw hole that will eventually corrode the screw and cause it to let go, Use a wood pin {Toothpicks/golf tee/spoon handle/etc.} if want to use dust use saw dust and glue.

@jeffbuck2624 10 ай бұрын

Yeah... and if there is any chance of it ever getting wet, the corrosion will be terrible, but the salt and the screw's hold will be gone.

@user-cq6km9vq2m 10 ай бұрын

Getting screwed does leave one salty, though. Jus' sayin'

@randykiessig3365 10 ай бұрын

@@user-cq6km9vq2m You have a twisted sense of humor.

@maximus1811 9 ай бұрын

EXACTLY, TOOTHPICKS WORK PERFECTLY. 👩🤗

@djosearth3618 3 ай бұрын

that's a good point i forgot about that one, that was a a very stupid one but among only about 3-4 not the normal 50-100% :). Ya everyone should know to use splits of scrap wood or rounded up used paper or nearly any inorganic trash really just not salt I use dried little twigs alot but never toothpicks (anymore), i'm trying to be more ecologically concious but not too ppreachy sorry if i came off that way, atleast i'm not using a fork to hang a little picture hehe (sewing needles sometimes work great for that tho) w love and respect from Canada!

@herdHistruth 10 ай бұрын

3:00 that's not to "increase the inner diameter" it's to get a broken pipe out of the coupling

@GarnierOlivier 10 ай бұрын

It’s already bad to steal other people videos to create a click bait, the guy commenting half the time doesn’t even understand what the trick is actually for 😂

@rosebud961 4 ай бұрын

I really don't even like his voice either. And I like for them to explain what and why and how whatever it is they are doing, ya know what I mean.

@AimeeAimee444 2 ай бұрын

How about the mosquito singing in the background! 😂🤣🤣

@jacobrjager 10 ай бұрын

FYI: duct tape is not usually transparent and has threads embedded in it. The tape used on the door of that car looked more like clear packing tape (AKA cellophane tape).

@konciliogasco3324 10 ай бұрын

Also if there is any compromise to the paint such as a slight crack all the paint comes too body shops love ya doing this

@DanaX09 9 ай бұрын

Yeah. Definitely NOT duct tape.

@jakeqwaninne8502 4 ай бұрын

@@konciliogasco3324 body shop here, ya that looked like packing tape to me too , and ya, it's great when customers try to fix their cars, and fuck it up, just don't put silicone anything on the car, we can't always get it off,and that sucks, it causes paint and anything else for that matter , not to stick, paint jumps rite off the pannel, it was still pretty brilliant though, i'm gonna try it

@djosearth3618 3 ай бұрын

Real duct tape is adhesive backed metal like a thick tinfoil for doing duct repair work/sealing. that's why most or that (MUCH temporary/cheaper) duct tape is grey/silver. But still good catch and point, that's CLEARly packing/shipping tape ;] -with love and respect from Canada

@jakeqwaninne8502 3 ай бұрын

@@djosearth3618 it isn't really called duct tape, it was called "DUCK" tape, for it's moisture resistant properties, it was invented for the military

@BitSmythe 10 ай бұрын

Some good tips, but that _incessant background “music” noise_ is *grating enough to remove rust and grout!*

@leemacdonald3487 20 күн бұрын

At least they didn’t have bad transcription over the whole video

@jaimeeoww 10 ай бұрын

Where’s the thumbnail? I watched the whole video how did i miss it

@v1antbo 11 ай бұрын

The salt will destroy the screw.

@JXPLennox 10 ай бұрын

... or it attracts water and dissolves in it.

@offthebeatengrid 5 ай бұрын

And it will dry out the wood, becoming loose again before the screw goes bad.

@carolynandcocohaywood2638 10 ай бұрын

Amazing how easy things are when someone shows you how to do it.

@dennishowland7495 10 ай бұрын

It’s a great idea that people share their tips what other people

@charismahornum-fries691 10 ай бұрын

Fun tips that most will have forgotten about in less than a day but is highly entertaining.

@chaplainmattsanders4884 10 ай бұрын

Cool ideas. Thnx for the collection. (Maybe include chapter markers in the description for quick reference?)

@slowboat6021 10 ай бұрын

actually had some good ideas in that. thanks for sharing

@notmyworld44 11 ай бұрын

Dear friend, at 0:20 that isn't Duct Tape. That's Packaging Tape. Nevertheless, that's an amazing use of it, and Duct Tape would probably work just as well, if not even better. So thanks for the demonstration!!

@UKcomedyfan28 10 ай бұрын

I agree about it not being duct tape. Duct tape would leave a sticky residue (as would packaging tape). 12:52 is also not duct tape. It looks like electrical tape, but I could be wrong.

@rq3733 10 ай бұрын

not to mention it might remove some door paint😁

@JustAboutAnything66 10 ай бұрын

My wife said immediately, "That's packing tape!"😃

@melenynder7136 10 ай бұрын

@@UKcomedyfan28 Painter's tape

@UKcomedyfan28 10 ай бұрын

@@melenynder7136 I don't think the painter's tape would be strong enough to remove a dent in a car door.

@calipete 10 ай бұрын

The music is incredibly annoying, and some of the "hacks" left me asking, "Why?" Still, enough of them were so absolutely ingenious that I'm going to take notes and begin trying them in my work life immediately. I especially liked the gear tooth repair, and the staples to fix broken plastic repair. Very cool. 👍🏻

@B_HarTz 10 ай бұрын

Ur just old and bitter and think everything is annoying … prolly

@herdHistruth 10 ай бұрын

10:15 never drill a ceiling tile from the top, you might bust out excessive tile as the hole saw goes through, drill a small pilot hole through first, then drill from the underside.

@jamalbokhari2474 10 ай бұрын

Great video. Extremely helpful

@SteveH-TN 7 ай бұрын

Thanks for sharing your hacks and tips this video.

@riverbender9898 11 ай бұрын

Excellent tips. Thanks.

@TroyQwert 9 ай бұрын

Really useful hacks. At least for me, some of them... Thanks for sharing!

@tinacheez1450 11 ай бұрын

I show these to my grandma when she falls asleep, better than coffee

@tinamortensen1220 10 ай бұрын

Why didn't you include the thumbnail image in the hacks?

@colemyst 10 ай бұрын

Once again he thumbnail idea is not shown! I can only believe that the thumbnail was a DIY of the expensive metal hinges shown at the end.

@aprildegele1510 10 ай бұрын

I've watched many of these videos and I can say that this episode had SO many great tips! Thanks for posting.

@djosearth3618 3 ай бұрын

I agree. they are usually loaded with at least half useless, nonsenible or even more difficult but more complex ways of doing things but this one was nearly all pure brainiac solutions. The one where the guys used a fork to hang a picture was ugly as heck if it was drywall he could have used a sewing needle at a 56-60 degree angle those little things have quite a bit of holding power and make nearly no hole. just don't use the sure thinnest inflexible ones (unless hanging something really light. Also the guy that stuck (forever RUINING the critical factory finish on the drill bit and then wasted 3 black zapstraps making more micro-plastics including that stupid cup, just to mix 1/2 cup of epoxy/resin/activator/colour was mind dumbingly stupid. Popsicle stick or two would work just fine, i've been using a bent a peice of thicker bare wire or even part of an oldmetal coat hanger, i twist them into a spiral or like a kitchen honey utensil or whisk :) Good gomment! -respect and love from Canada ;]

@pajolee6918 25 күн бұрын

The fuck video did you watch?

@genmasaotome3503 11 ай бұрын

2:59 increase inner diameter... is sorta true.. but it seems like an old tube was cut and the left over part is what comes out.

@MrSpartanicus 11 ай бұрын

It was, they make a saw kit to essentially grind that piece out now. Probably quicker then heating it

@user-er5mi9mr2i 10 ай бұрын

I bet it is...

@dgulssmith4063 11 ай бұрын

Just discovered this channel and already been through tons of vids. Content is great!

@MinhNguyen-mo5fp 7 ай бұрын

Thank you 😊❤

@berniecelee5062 10 ай бұрын

Wow 😮 what a great video on these genius tips and tricks ! I am not a gal with a hammer BUT this came across my algorithm and I am fascinated ! This Mcgiver attribute is something I wished my hubby has …. But no , he’s a cerebral guy ….so no to using his hands. I have to hire the handyman and they are a dying breed. Can’t find any in my town cause no one wants the small jobs. It’s sad .

@emmanuelmakunzva6187 11 ай бұрын

amazing throughout

@royceadkins7529 10 ай бұрын

Imangine this other wordly tip if the wrench dont fit the nut reach for the right size wrench not a quarter 😂

@PollyHistor 10 ай бұрын

Unless you only have the one "wrong sized" wrench.

@tgeliot 4 ай бұрын

@@PollyHistor What person who owns box end wrenches but does not also own an adjustable wrench?

@PollyHistor 4 ай бұрын

@@tgeliot Fair point. Someone who's tools have been stolen, I suppose.

@GM-ww 10 ай бұрын

Where is the tip displayed in the original thumbnail? Am I missing it?

@jparky1972 3 ай бұрын

That's what's called click bait. It's a home made version of the hinges at the end of the video.

@JustAboutAnything66 10 ай бұрын

In my experience, these types of videos are usually full of useless hacks that either don't work, except in rare cases, or "solve" non-problems. I was surprised by this compilation. In addition to some tricks I've used for years as a carpenter and maker, there were some I'm certain will work and can't wait to try.

@timtim2668 Ай бұрын

6:25 Very smart approach to measuring and cutting a stairs steps wall skirt

@saulogabrielmontanarorosa289 11 ай бұрын

discovering every new thing this channel is 💯

@mk8530 10 ай бұрын

Do you have a hack that will memorize all these amazing hack's?

@tashamclean 8 ай бұрын

😂😂

@davidjones7238 4 ай бұрын

I've been working on things all my life. I've been an aircraft mechanic for 35 years. I've also seen a bunch of these kinds of videos. This is the best one I've seen. I'm saving it, I'm going to watch it a bunch of times to help remember.

@joanjackson5825 10 ай бұрын

I think this is the best video I have seen in a very long time! Thank you so much for posting it.

@t.b.9748 10 ай бұрын

No video from the first ad picture.

@erict3728 10 ай бұрын

Came here to see the thumbnail explained. Watched the whole thing waiting. Clickbait

@misterl2875 10 ай бұрын

Didn’t see anything that I couldn’t live without.

@Jesse-zk9ge 11 ай бұрын

I'm sorry but I believe this is what we need to teach kids in schools that are days, so that they could be more independent and not dependent upon others to do stuff for them.✌

@ibubezi7685 11 ай бұрын

My 'problem' is..... how to remember them all?!??!?!? Could have used so many of them.... if only....

@canadian2uk 10 ай бұрын

That's what moms, dads and years of experience are for. Most of these tricks are great for those doing a task once, but impractical for continual utilization.

@JP_TaVeryMuch 10 ай бұрын

As far as I can see, they're all being brought up with the mentality of I'll get someone in to do that. Good luck earning enough, but the main problem will be the disappearance of the someones.

@djosearth3618 3 ай бұрын

That's not what the Oligarchy wants, where have you been, Switzerland?! open your eyes. wtf is summer break even for (WAS for kids to help on the farm) but these days i gaurantee you EVERY kid would rather do 7 weeks on 3 weeks off all year round then a long boring suummer vacation

@jimweisgram9185 10 ай бұрын

I'm curious what kind of electrical circuit is involved with the the tip of twisting wire with a drill. If that is 120v or 240v, soldering it is a bad idea. A line at that voltage, if it overheats can melt the solder. A wago connector or wire nut are safer choices.

@kentrussell4007 10 ай бұрын

It seems to me that if a circuit is carrying so much amperage that it cause a solder connection to melt then there are more serious problems than how the wires are connected at the junction box.

@laurencerilling5873 10 ай бұрын

That’s any voltage. Also, why they were twisted tight first

@mang4260 10 ай бұрын

As an electrician, i really don't recommend to follow any kind of idea this channel provides about electrical circuit. It's not this dude you will call when his "tricks" will broke, and you will have to pay a full time dude like me, to found the problem, and repair it, then complain about why the bill is high, when you can avoid it by not doing those "ideas".

@Tipperary757 10 ай бұрын

Amazing stuff. Salt might degrade with moisture.

@TheDanno210 9 ай бұрын

And the salt will begin eating any metal it’s exposed to the moment it has become exposed to it.

@2tart 8 ай бұрын

Some of these “tips” are deadly 😅

@laurencerilling5873 10 ай бұрын

Use a worn out saw blade… Uses a new blade

@sylhomeo6351 10 ай бұрын

Ingenious!

@dennwahh 5 ай бұрын

This was a good one with lots of new tips. Hey if you can, I’d like to know what those cabinet door hinges are called. if you know i would greatly appreciate if you could let me know. Thx

@ThailandTerry 3 ай бұрын

@dennwahh it is on the screen top left. Lamp Monoflat Lin-X hinge. Lin-X450. There is also other names bottom left and right maybe manufacturer / distributor ? at 17.18 time in video.

@timtim2668 Ай бұрын

15:54 that's awesome I love the Self Feeding Camp Fire 🔥

@timtim2668 Ай бұрын

10:06 WOW 🤯 That's Insane! How Simple and effective that technique was for where to drill a hole for the extending Water Pipe for the Fire extinguish system

@AnneLuchyshyn 8 ай бұрын

Where do you obtain the PVC holders for hoses or tools?

@daledickey8400 6 ай бұрын

Plumbing supplies, pvc pipes glued together to match configuration of your drill. Most building/Plumbing suppliers can help pick the parts by showing video or print a photo from the video.

@themikeymikechannel2947 11 ай бұрын

Anyone see the bulb in the beginning - the top SHELL was lite up b4 he put it back on. LOL LMAO

@EmptyZoo393 Ай бұрын

Yeah, I was looking at that and it seemed like a bad idea. Pencil lead might be somewhat conductive, but when you try to put a couple of watts through it it's just going to light up in a different way. Congrats, your busted LED bulb just became a burned LED bulb.

@oscaramerica9477 9 ай бұрын

Very interesting & so smart, thanks 4 add

@herdHistruth 10 ай бұрын

8:06 until the wrench binds on the bit and you have a helicopter to deal with.

@Terence_x 3 ай бұрын

🤣🤣👍👍

@akhi93 10 ай бұрын

GENIUS

@prestow 10 ай бұрын

15:16 Great idea. To complete it make a hole so the fire won't catch wind and so the burnt materials can go down, allowing the other logs to gently roll down

@alibro7512 11 ай бұрын

Apart from the narrator not having a clue what he's talking about these tips are great.

@Nellosphere 10 ай бұрын

Big fan of the gear fixing tip with wax casting.

@shane8915 10 ай бұрын

Yep! That one was instantly logged to memory. I still wouldn't do that fix unless it was an emergency. Plastic gear replacements are cheap. That is... if you can still get them. Since my career is in maintenance, I know that sometimes you just can't get the part. Usually, if I can't get the gear, I'll have one made out aluminum. That's what I do for anything that I personally own. But, that was definitely slick. Will certainly get you out of a bind in an emergency.

@newt2010 10 ай бұрын

Do you know what duct tape is? Just wondering, as the car door repair was done, using packing tape.

@reanaldrogan9852 11 ай бұрын

Jeez, that was insane! you earned my like and subs

@hewlejr 9 ай бұрын

Bingeing this so hard!!

@utube1818 2 ай бұрын

8:07 The wrench is not to stabilize the tool it is to indicate when your drill perfectly level, a metal washer will also do the same job.

@gilldanier4129 10 ай бұрын

All these are great, but I forget almost instantly.

@Terence_x 3 ай бұрын

🤣👍

@danielvicars515 Ай бұрын

Screenshots help...

@shylfer5351 11 ай бұрын

What is the hose hanger called?! I need that in my life!

@Karbonthirteen 10 ай бұрын

If you find out please let me know. I’m searching the comments to see if someone made a reply with the pvc hose holder information. Thanks

@moonverse5064 7 ай бұрын

impressive video

@georgejones3526 5 ай бұрын

I just knew the clickbait thumbnail wouldn’t be in the video, and I was right.

@pjaypender1009 10 ай бұрын

The tape used to pull out that dent was not duct tape, it was packing tape.

@mikepalmer2219 10 ай бұрын

Ya I was like omg don’t put duct tape on your painted car!!!! Lol. Then I seen it was packing tape. Lol.

@F1DesignUS 11 ай бұрын

OK....picture and fork is a good one

@cholman4248 10 ай бұрын

The fork hanging picture thing...genius!

@kfcmalaysia5580 8 ай бұрын

Clever !!!!

@traynor333 9 ай бұрын

Anyone know the song title used at the beginning of this video? It does not come up on the music listing in the description.

@utubeape 2 ай бұрын

some very good tips here

@brianchamberlin1539 11 ай бұрын

Just ordered an extra large leaky bucket off Amazon.

@christopherleander9068 11 ай бұрын

😂

@Gase4kafe 6 ай бұрын

Salt with steel - very smart...😂

@maureentuohy8672 10 ай бұрын

And this is why I love KZfaq.

@bigrednation82 8 ай бұрын

What back ground music is playing ? I like that song 🎵!! What’s the name ? At the beginning

@mattgabbard9088 7 ай бұрын

It's called 🤢🤢🤢🤢 by the band 🤮🤮🤮🤮

@OldAndGettingOlder 2 ай бұрын

The monoflat hinge is just what I need for an upcoming kitchen remodel. I want a cabinet that can be left open. I didn't want to use a sliding door or roll up.

@lylestavast7652 10 ай бұрын

using that coin to fill the gap beween wrench and flat is probably only good for a ... wait for it ... quarter turn or so...

@mikepalmer2219 10 ай бұрын

Rofl

@CharlesKeyz 10 ай бұрын

🎉😂

@42JEMAR641 10 ай бұрын

And BAD for the heat outside 😞

@steveunderhill5935 10 ай бұрын

Dad approved

@socialpsycho 10 ай бұрын

🤣☝🏻

@TalkingHands308 10 ай бұрын

0:17 "Don't underestimate the hidden power of duct tape" *shows someone using packing tape* 12:53 "It's just a simple tray made of duct tape" *shows someone using painter's tape*

@boris9305 10 ай бұрын

He def does not know what duct tape is

@TalkingHands308 10 ай бұрын

@@boris9305 Or he just thinks every kind of tape is duct tape, lol

@djosearth3618 3 ай бұрын

Haha nice you caught those too eh ;]

@djosearth3618 3 ай бұрын

@@TalkingHands308Funny thing is that real duct tape is actually metal, at least here in Canada. That tape with the reinforced strings through it is usually silver and was a cheaper TEMPORARY replacement for real adhesive backed metal duct work tape. Guess it's another 3m invention like post it notes were originally supposed to be used as bookmarks but the manager wrote his rejection note on it and sent it back and between the mgr the inner mail delivery and the R&D dept someone had a eureaka moment. Bonus: Inventor didn't even get a bonus, but that's nothing comparede to Dyson Inc. stealing and patenting all those recent engineering students ideas (not sure who thought of the sideways fan in the base BUT i KNOW it was Dyson that decided to charge $600 for it ;] - much love and respect from Canada

@TalkingHands308 3 ай бұрын

@@djosearth3618 Yah, if you have a great idea, don't trust it with anyone, patent it first, lol.

@cbpuzzle 10 ай бұрын

That pipe balloon is GENIUS. They charge a fortune for those water stop tools.

@tgeliot 4 ай бұрын

Or use a wad of bread.

@jeremiahyeo5863 10 ай бұрын

“…it is possible to lift a manhole cover without a special lifter “ (7:00) - Said the guy who used a special lifter to lift up the manhole cover… That special lifter being a pick axe or a Mattock, And a large wooden dowel or a baseball bat.

@leknarfs 7 ай бұрын

Hey, the fix at 2:15, a ballon, some wire, A TIRE VALVE STEM, and a pump!

@timtim2668 Ай бұрын

4:33 VERY GOOD IDEA💡 He made a Homemade Electric Caulking Gun

@FoxToyBoy 10 ай бұрын

Z stacją dokujacą Ultra Dock SD20F82750 oraz monitorem iiyama GB3466WQSU działa spoko. Dodatkowo 2 dyski, systemowy M.2 TS512GMTS430S oraz sata 4GB na dane. Daje radę do net, media, lekkie gry. Fakt W11 nie poleci ale u mnie ma dożywocie. (Dźwiga rozdzielczość 3440×1440 na dwóch monitorach, łącznie 3 ekrany - przylemnie się pracuje)

@sig6056 9 ай бұрын

Hanging a wrench on a quickly spinning drill is not something i ever see myself doing.

@Terence_x 3 ай бұрын

😂😂👍👍😂😂

@newt2010 10 ай бұрын

Increase the inner diameter of PVC?? Did you watch the same video that you narrated? He was removing the price of the old pipe from a previous connection. Making for a new piece, or T or just a repair. C'mon.........watch your. video before you comment. Yes, he did increase the inner dimeter, but that is not what was really going on. It was a repair

@chrisbaldwin5170 10 ай бұрын

What was that last hinge I need it in my life

@mjd_double-ya3904 7 ай бұрын

Anyone who can sit through this is either in a coma or trying to induce REM. 1 minute of this was enough to bail out.

@danielvicars515 Ай бұрын

Turn off the sound and watch at 2x speed. Pause and screenshot good ones. Store screenshots in 'Hacks & Tops' file. Review often.

@annsdecor9831 2 ай бұрын

What is the tool called that is holding up the hose and the extension cord, please? It's at 16:20 in the video. Also, where can I purchase it please?

@herdHistruth 10 ай бұрын

7:33 you can get a rawl plug out of the wall by putting a rawl screw in partway and pulling the screw with a pliers or hammer 🔨

@tgeliot 4 ай бұрын

Just put something between the hammer and the wall to spread the load so you don't make a dent in the wall.

@herdHistruth 4 ай бұрын

@@tgeliot good point, I'm used to masonry situations

@herdHistruth 4 ай бұрын

@@tgeliot ironically, before I was an electrician I insulated houses where we took some siding off with a wedge tool and a tapers knife behind it to protect siding underneath the wedge.

@juliettelynne5861 10 ай бұрын

But…but…but…it’s so much fun doing things the hard way!! 🙈

@rinskegemen3678 Ай бұрын

That music is torture!

@zbigniewczaykowski514 7 ай бұрын

Old saw blade, that's a brand new saw blade that's never been used with all of its teeth intact, a 60 teeth blade like that is about £50.

@dexternrooks1210 10 ай бұрын

How did the led light bulb thing work?

@TheDanno210 9 ай бұрын

It’s magic ✨🪄 💡 ⚡️✨ 🤷🏻‍♂️

@danielvicars515 Ай бұрын

Graphite in the 'lead' of the pencil conducts electricity between the contacts of the burned-out LED, bypassing the faulty one and completing the circuit.

@mjhepburn11 10 ай бұрын

That fork trick for hanging pictures will come in handy.

@jolkraeremeark6949 4 ай бұрын

Yeah, if I can remember that....

@moboutmen 10 ай бұрын

You had me at the fork.

@iteerrex8166 11 ай бұрын

This one 2:44 is to remove the glued cut off part.

@Terence_x 3 ай бұрын

🤣👍

@herdHistruth 10 ай бұрын

10:00 you can do the same thing by making a circle with your index finger and your thumb with the nut in the middle

@jessicadunne7838 11 ай бұрын

Cool!!

@maximus1811 11 ай бұрын

Love, love, love you all! Can't wait for your next video. I've actually had situations similar to some of these and had several "Brain Farts" trying to figure out how to do a job and started laughing that I got some done exactly like you showed. My husband was amazed that I could troubleshoot it before he did and got it done. His response was "Who says girls can't figure it out?" 😅😂🤪🙋‍♀️🥰 Keep showing your videos, Thanks😁

@Terence_x 3 ай бұрын

🤣👍@@karlwithak.