Hangar 9 Carbon Cub SS 15cc Gas Powered

No video

Hangar 9 Carbon Cub SS 15cc Gas Powered - MAIDEN!

Рет қаралды 20,073

Күн бұрын

Chloe Prince takes to the skies with her Hangar 9 Carbon Cub ss, 15cc gas power RC Plane. Powered by the Evolution 15cc gas Engine, Spektrum AR636 with AS3X and programmed with a SAFE mode profile from the E-flite Timber 1.5!
Join our group on Facebook “RC Safari”
If you like this plane go to HorizonHobby.com for more information.

Пікірлер: 103

@PetrincicBrosRC 5 жыл бұрын

Amazing maiden my friend. Perfect takeoffs and landings. I love it. Was thinking a long time to get this baby. It looks really great. Big salute from Slovenia, Pilot Robert

@RCSafari 5 жыл бұрын

Robert Petrinčič oh you need this and one for Captain Blaz too!

@angelreading5098 5 жыл бұрын

Very nice Cub,well done Chloe a little beauty and flies just like the real thing,remember hold the stick back while you taxi to stop her tipping over.

@oldfart43311 5 жыл бұрын

Wow, you scared the crap out of me on your first take off. That pole was just to the left and I thought the torque would put you right into pole but you pulled through with no heavy rpm until you were well past the pole. Nice job!!

@ricardopr54 5 жыл бұрын

Beautiful aircraft and flight!... Thumbs up from Douglas, Arizona 👍🏾👍🏾👍🏾🇵🇷😊

@danrchobbies8994 5 жыл бұрын

Don't have gas plane... yet thanks to you and captain blaz I just might. I will learn a lot I'm sure.

@dennisfarley6574 5 жыл бұрын

Congratulations Chloe great job on the maiden.

@lukeo8196 3 жыл бұрын

Such a nice plane with such "sub par" landing gear.

@RCSafari 3 жыл бұрын

At the time I shot this video, I was using the stock wheels that came with the kit - which are hard as hockey pucks. I only got about 4 flights on the plane before I had to replace the springs on the gear because they had worn out. I replaced the wheels with Soft Dubro 5" wheels, and this has helped it out 200%. The landings are quiet now, and I have since found some better springs that are a little more forgiving. I'd like to get a pair of shocks for it like the ones PR Bush Wheels made. But they are out of business, so I am thinking about trying to machine my own, at some point. I also got rid of the 15cc Evolution Gas motor & 8oz fuel tank, and put in an O.S. 1.20AX Glow Engine with a 16oz tank. WAYYYY better! I would recommend nothing less than 20cc motor for this plane. Its a bit heavy and 15cc just doesn't get it for my tastes.

@carlwill5009 Жыл бұрын

Hi there I saw your video I am an instructor here in Illinois I just got a female student and she is so excited to learn to fly we started late this year I am pretty sure she'll be much better next spring it's nice to see females into RC airplanes I like to see more of you females out there makes it more exciting thanks for your video Carl

@johome404 5 жыл бұрын

Big Planes are more gentle !! Good job on Flying that wonderful plane !!! may it have a long life ..

@mb2308 5 жыл бұрын

Nice plane and very nice maiden! Congrats...

@JIMBOB-zg1rc 5 жыл бұрын

Awesome job and great see someone so happy .

@j.q.higgins2245 5 жыл бұрын

Congratulations for both the assembly and the perfect maiden of this gorgeous bird! Happy New Year to you and your father, and thanks for sharing!

@kenmunn4421 5 жыл бұрын

Nice Job, those maiden flights alway get the adrenaline pumping. Even with 50+ years doing this. That post sticking up just to the first touch down looked scary close. Like your videos .

@DanielMigneault 5 ай бұрын

Could not go any better!

@BarryGrueter 5 жыл бұрын

Nice 🤗 flying Chloe👍👍👍

@KA-tu1zh 3 жыл бұрын

Can't think of a better Jan 1st :-). Very encouraging - thanks, I am pulling the trigger "now"!

@andrewmcphee8965 5 жыл бұрын

Smiled all the way through the video, great plane, great sound, great piloting! Enjoying your channel.

@chriskayakq-ster7264 5 жыл бұрын

Fantastic maiden flight Chloe! So happy it went without a hitch I kind of new it would fly like a kite. Seen many of these beauties at our field in Md. Now I too want to build one from arf this plane is bigger than my 70t clips from Sig. Wait till you have a blue sky with puffy white clouds your going to love that color cub it is awesome!!!!!

@scottairshows9828 5 жыл бұрын

I love the crawl-walk-run approach you take on things! All too often I witness R/Cers overlook the fundamentals that ensure success and instead focus on things that only slightly improve performance (assuming the pilot is even capable of taking advantage of it)

@williewonka1970 5 жыл бұрын

Chloe you are such a great pilot. I have same plane on my work bench right now. Hope to fly it this weekend if the weather is good. Been windy here last few Sundays Southern California area. I have a Go Pro for it hope to get some nice HD video to post on KZfaq. Happy Flying.

@RCSafari 5 жыл бұрын

bill b it’s a great flying plane. Scale looks and flying characteristics. Enjoy! I’m working on the Hangar 9 xCub now. Hope to get it up in the air by Easter.

@ohioace58 2 жыл бұрын

Was that a Slovenian roar I heard from you Chloe? (Ohh Yeahhhhhh). What a great gasser flight. Could feel your excitement. After decades of owning small gas engines (chain saws, weed wackers, ect) and putting up with their issues, I'll stick to electric motored planes, but sure smiled while you were tearing up the skies with your gasser.. :)

@bobdegood71 5 жыл бұрын

Great job of flying with some really SWEET landings. When the engine makes that "bluberie" sound it is rich. Every time you fly the air will be different and a little tuning each time may be necessary. Good job, thanks for sharing.

@Mike-pb5bj Жыл бұрын

Well done ! That whas Nice ! ✈️✈️✈️👍

@DeucesWildRC 5 жыл бұрын

Congrats! Hard work paid off

@kennywohltman436 5 жыл бұрын

Beautiful plane and you flew it perfectly. nice job and some great camera work.

@gorace71 5 жыл бұрын

Nice job flying and keeping that engine. Running. Good editing alsp

@Ahkeys82 5 жыл бұрын

Congratulations! Beautiful flying plane.

@chuckhall1984 5 жыл бұрын

Sweet maiden more power 20cc

@antonherr5832 5 жыл бұрын

Great flight! Now put some tundra tires on that beautiful bird. I've got the quarter scale j3 and I swear they are the easiest planes to fly, the bigger they are, the more you love em.

@aarontaylor1484 3 жыл бұрын

It flies real nice great flight congrats and well done

@petergoodwin2465 5 жыл бұрын

Beautiful plane, great flying. Wish iwas half as good.

@rcworl676 5 жыл бұрын

Peter Goodwin you'll get there buddy

@leadgindairy3709 3 жыл бұрын

Great job, congrats on the awesome plane I want that one next so bad I cant wait! I hope you get it tuned just right!!

@ArcticRc 5 жыл бұрын

Super maiden.😊

@organgrind 5 жыл бұрын

Good job, gas and balsa planes... yay 😊😊😊😊

@victorrcjets7660 5 жыл бұрын

Nice job, easy landing!

@dkalwishky 5 жыл бұрын

Nice job!

@JeffinLowerAlabama 5 жыл бұрын

That was a nice outing came due to the LIVE jive from Saturday, Jeff

@czflyer3947 5 жыл бұрын

AWESOME! Ear 2 Ear smile on New Years Day!

@RCINFORMER 5 жыл бұрын

Nice Job!

@RCSafari 5 жыл бұрын

Thank you!

@AerialPhotogGuy 5 жыл бұрын

I'm seriously considering the purchase one of these Cubs. I fly a rental Sport Cub S2 once a month or so depending on weather and it's the best handling taildragger I ever flown (it's the full scale light sport or LSA version made by CubCrafters). I think Horizon Hobby has a real winner with this model! Nice flying BTW! :-)

@125saito 5 жыл бұрын

Very, very nice!

@rcmodellflieger3988 3 жыл бұрын

Nice plane 👍

@anthonyb.7360 5 жыл бұрын

Awesome job! This is one of my favorite planes to fly. You did great.

@john-ue1lv 5 жыл бұрын

hi , robert and blaz recommended u , nice

@robinbw9999 5 жыл бұрын

Greetings from down under. Mine is the electric version, flys beautifully. Have a look at P R Bushwheels. I've upgraded to 6.5" wheels and better suspension. Keep warm😊

@smokster0604 5 жыл бұрын

Salute what a flyer....

@mickclitheroe8585 5 жыл бұрын

Great stuff Chloe, Really enjoying the channel ! keep up the great work...All the Best from Blighty

@NICHOLASRGLORIOSO 5 жыл бұрын

OHHHHHH YEAHHHH!! DIS IS IT CHLOE, H E Y!!! 🤣🤣🤣🤣🤣

@rcman6895 5 жыл бұрын

You did a real good job with flying the only thing bet you didn't do was adjust a carburetor you have to do that every time you fly and you have to run the throttle up and hold the plane up with your hand then make sure it doesn't stall all that will come in time other than that you did real good good stuff

@1unaffiliated1 5 жыл бұрын

Great job on the maiden...Atmospheric conditions rake havoc on Gas and Nitro engines...Its cold, damp and soggy around here...I guess I am a fair weather flyer...Start with the high side lean it out for top rpm then back off a hair...then adjust the low side, yours could be too lean...your looking for a smooth transition from low to high...yours is close, try an 1/8 of a turn either way until it runs like a top...Hope this helps...

@RCSafari 5 жыл бұрын

Steven Stowe thanks. I’ll give it a try!

@WayneCook306 2 жыл бұрын

Great job thank you.

@FarmerFpv 5 жыл бұрын

Beautiful carbon cub, congratulations on the maiden, but I bet it would appreciate a flared landing :) lol.

@Georgewrigley 4 жыл бұрын

Thoroughly enjoyed this flight. Beautiful plane. Subbed :)

@RCSafari 4 жыл бұрын

Awww thank you 🤗🤗🤗

@Georgewrigley 4 жыл бұрын

RC Safari you’re welcome 😊

@dennism103 5 жыл бұрын

It flys real nice

@FatGuyFliesRC 5 жыл бұрын

Awesome plane and flight!!

@perkyplanesrc9363 5 жыл бұрын

Awesome flight...seemed like it flew easy. I'm assuming you got the CG issue worked out from what I was reading on Facebook. Blood, sweat, and beers...lol loved it!

@elpunto231 5 жыл бұрын

Now you are talking!!!!!!this is it!!!!!!!needs some tuning but it was very giod maiden...

@RCSafari 5 жыл бұрын

Thank you Captain!

@builtbyWikander 5 жыл бұрын

Awesome! Congratulations!

@dtkristy1 5 жыл бұрын

Great job. I can appreciate your enthusiasm! Reminds me of Pilot Robert and Captain Blaz! I too have the Carbon Cub, and after flying it at first with a DLE 20, I changed over to an OS 110 4 stroke glow and couldn’t be happier. Such a nice, low, rumbling sound. You will like that Saito 4 stroke on your new X Cub! Best wishes to you. I am a new subscriber.

@RCSafari 5 жыл бұрын

David Kristy thank you and I’d love to see video of your cub flying.

@dtkristy1 5 жыл бұрын

RC Safari I’ll have to take one when the weather finally gets decent! Even down here in Tennessee it’s been a rough winter with very few good flying days. Of course, not like Ohio, but it’s all relative! 45 degrees is my lower limit! 🥶

@peterp.3530 4 жыл бұрын

Good maiden flight and great model from Hangar 9. I want to buy this one or Carbon Z from eflite. This one looks much better. Thank you for this presentation. Best regards.

@jeremyperry8047 4 жыл бұрын

right on i love mine good flight

@gpxrp7520 4 жыл бұрын

your videos are so entertaining, than you!..this is my next plane.

@reckemroysrc3764 5 жыл бұрын

Ask Capt BLAZ he can help. Nice flight. I flew my Cub today too. 😎

@reckemroysrc3764 5 жыл бұрын

I SALUTE YOU MY FRIEND 😎

@katananoob5117 5 жыл бұрын

ive been waiting for this!!

@michaelsherman1018 5 жыл бұрын

Great flight! Try and keep the elevator up when taxing, hate to see you break a prop.

@AlFathethiopia 5 жыл бұрын

💡

@michelraymond286 5 жыл бұрын

💙

@danielrogers8506 5 жыл бұрын

Hello. Just purchased one of these and I too am mounting an AR 636 in it with the Timber profile. Did you have to adjust the angle of the receiver? I’m asking because it seems like when safe mode is on, and the plane is held level (tail off ground) it still pitches up.

@RCSafari 5 жыл бұрын

Daniel Rogers it’s mounted level in the cabin. Mine flys decent. Just a tad of right Aileron trim.

@andrewmather1354 4 жыл бұрын

Well done on the maiden. I maidened mine yesterday as well and it was a great feeling. I was nervous as hell and it was a pussy cat to fly. Mine is electric setup

@bryanpatton1949 5 жыл бұрын

👍🏻👍🏻👍🏻great way to start the new year! What state are you casting from?

@RCSafari 5 жыл бұрын

Bryan Patton Ohio!

@weasele1 5 жыл бұрын

from an experienced pilot that was good flying. thanks for posting a video of the 15cc plane with an actual fuel engine lol most just post electric. thats all i ever fl i want a fuel plane, how much total did you spend ?

@RCSafari 5 жыл бұрын

Joseph Rueck kit was 350. The motor was 300. Servos receiver and batteries another 300. And about 50 in misc other stuff.

@weasele1 5 жыл бұрын

which motor did you use thats expencive almost seems cheaper to go electric an electric esc motor 1- 5000 ma 6pack or 2 -3 packs if i can get a large enough 3 pack itl last 15 minuets in my timber ad servos but i guess servos arent cheap if you want good ones the servos in the timber are junk iv replaced several already and never crashed the plane

@magnuswadeberg3690 2 жыл бұрын

Hi from sweden,bigger propp maby?🤔

@weasele1 5 жыл бұрын

so your flying that with a 6 ch receiver ?. I wanted to use the saito fg21 4 stroke engine im a bit confused as why i still need to add oil but i guess because its a model engine lol the saito engine is almost 500 and ignition 150? thats going to be a very expencive build

@RCSafari 5 жыл бұрын

Joseph Rueck yeah. It’s not cheap but the thrill and pride is priceless!

@justanotherguy469 4 жыл бұрын

Hey Joseph, I am going to get this plane and I am going to use the Saito fg21 as well. How did it work out for you? I am concerned about cutting the cowling for the muffler. I saw on Tower Hobbies a flexible exhaust/muffler and I am wondering if that can be used and if so will it help me to avoid butchering the cowling? What servo's would you recommend? Thanks for any advice that you can lend.

@zubuxstein 4 жыл бұрын

Just curious, how is the carbon cub holding on after about a yr of ownership? * its impressive the attitude and love for the hobby shared to the viewers, ty.