Рет қаралды 211
Please click "...more / Show more" for links and more information. Visit www.horizonhobby.com/product/... for more information on the CubCrafters XCub 60cc.
Welcome to the fifth build video of the Hangar 9 CubCrafters XCub 60cc build, part of the Hangar 9 Back to Balsa Series! This video is going to start off with the installation of the engine to the motor mount. The fuel tank is installed to its appropriate location behind the motor mount during this process, and the entire motor mount assembly is installed to the firewall on the XCub 60cc. The proper steps in the cowling installation are also covered in this video. Lastly, the spinner and propeller are installed on the engine.
*Note that if you are using a DLE 55RA like in the video, you will need to supply around 20-23mm standoffs and extra bolts in order to achieve proper length of 190.5mm between the drive washer and motor mount.
Watch the rest of the Hangar 9 CubCrafters XCub 60cc build videos here! - • CubCrafters XCub 60cc ...
Follow Hangar 9 on Facebook!
/ hangar9rc